DIW Factory Replica Rolex GMT-Master II Oasis Arabic Edition with 3186 Movement

Posted on February 23, 2022 by Jason

It is close to March, watch factories must be very careful during the whole month of March, you know the special meaning of the day March 15 for them, many watch factories were fined during March in previous years, some were even closed and not opened again, so if you want to get some replica watches, you’d better place order with them before March, or you will have to wait until April. Almost all watch factories will stop accepting orders throughout March.

There are still not new watches published in our market, I need to find some watch which you will be interested in, some watch like this forged carbon GMT-Master II you did not see before. Actually I did not see a carbon Rolex before, almost all Rolex watches are made with stainless steel, the special forged carbon material indeed attracts me. I did not find this watch on Rolex’s official website, but later I know it is a custom-made version from DIW, which Designa Individual, it is a famous custom-made watch brand in Belgium. While this replica watch I am going to review is also made by a factory here named DIW, I am very surprised.

The case is fully made with forged carbon, including its bezel, which features golden markers that look like the color of sand in the desert. The carbon material looks special, its unique texture is highly recognizable, like the texture you see on the case, you will know it is carbon immediately when see it. The case has a diameter of 40mm, and measured to be only in 12mm.

The replica watch has a high price, first because of its forged carbon material, second, its movement is also one of the most accurate 3186 movement. The clone 3186 through the crystal back has the same functions as real Rolex 3186 Calibre, the decoration on the movement is also beautiful and fine, the golden stamp”3186″ can be clearly seen on the movement plate. I would like the factory to install a solid forged carbon case back on this watch, not a see-through crystal back.

The dial has an unique design that makes the watch not suitable for everyone, its Arabic hour markers make this watch only acceptable to customers in the Middle East. The dial is not white, the hour markers and hands have the same color as the bezel markers, their tone is like the sand in the desert. On the dial, only the hands are applied with superlumed material.

The watch band is nylon made outside, it looks brown, which is in line with the color of bezel markers and hour markers on the dial. The back side of the band is made with black leather, which feels very soft and is comfortable to wear, while keeping a cool outside at the same time.

This replica Rolex GMT-Master II is an unique timepiece, it also has a very high price, much higher than those regular GMT-Master II watches made by Clean, VR and GS. I am sure a certain group of customers will show their interest in this watch.

VS Factory Replica Panerai Luminor Marina PAM 1663 with Super Clone P.9010 Movement

Posted on May 12, 2021 by Jason

The replica watch I am going to review is a Panerai made by VS factory, it is a shame that this factory is still closed, currently they do not accept orders, I do not know when they will be back. Fortunately they closed by themselves, not by other special department. I think VS can not re-open their factory in a short period, because I heard that many factories that supply watch parts for VS factory were raided, so this is the main reason why Noob and VS factory can not take orders currently, watch parts are lacked.

Whatever, the PAM 1663 made by VS factory is a very good replica watch, even though I do not like it. Nowadays, modern Panerai watches seem to be more and more weird, a lot of them are more willing to use those new material such as carbotech or fusion material carbon with ceramic, in design, watches look more fashionable, but I see they are more lack of classics that can only be found on these old PAMs. For example, check this PAM 1663, its case is solid Titanium made, while the bezel is forged carbon, I do not think this is a nice combination, it is not my style, the titanium case looks like also having special patterns like carbon, it looks weird to me. However, this is the design style which Panerai adopted in recent years. Case diameter is 44mm, while 14.5mm in thickness, not too thick, plus the special case material, you will feel very light when wearing this watch.

Another selling point on the replica is the movement, which is super clone P.9010, it is developed by VS factory and is one of the best clone Panerai movements, the other famous movements researched by VS factory include super clone P.9000, P.999, etc. I do not know if other watch factories can make such good quality clone Panerai movement in future. The case thickness of this watch is very close to genuine Panerai, I think this is largely due to this super clone movement used in it.

Hope VS factory back to us in a short period, because there are a lot of new models coming soon.

Noob Factory Replica Rolex DIW Daytona All Black with Super Clone 4130 Movement

Posted on March 26, 2021 by Jason

In recent days, Noob factory published some new models, first, their Submariner 116610LN and 116610LV were upgraded to V12, so these two watches have really become very good, in the entire watch market, I do not think any other replica watches have such top quality like Noob Submariner. Besides Submariner, other new models Noob published are Daytona, which includes this DIW carbon Daytona I am going to introduce today and the Daytona with Meteorite dial. The Carbon Daytona, which looks very cool, was introduced to our market last year and attracted many people’s attention immediately. Before, three watch factories made this Daytona, they are WWF, JH and TW, their quality is good, but they have one big flaw, their case is a little thick. Just several days ago, Noob also unveiled this Daytona watch and improved it so that the case thickness is as same as genuine’s.

Now, Noob has completed the upgration of their Daytona collection, all their Daytona replica watches now have been upgraded to V4 edition, that’s a really good news to us, you can buy a better quality version at the same price, every time they made some improvements but still kept the same price. This time, Noob published five models of DIW Daytona, please check pictures below.

About the five DIW Carbon Daytona models, Noob not only makes them with real forged carbon, but also makes the case in correct thickness, the same as genuine watch. Equipped with Super Clone 4130 movement, they sell DIW Daytona at a high price, over 800 USD.

Like I said before, JH and TW watch factories made this Daytona, but they did not make the watch correct, flaws are abvious, especially the case is too thick, the carbon texture also does not look high end, it is greatly different from real watch’s. However, when I get this Daytona watch from Noob, I was surprised by its beautiful carbon textures you see on the case, the case back is also made with real forged carbon, not stainless steel. The entire watch looks very cool, it is not heavy but light in weight, very comfortable to wear.

The watch band is also a great highlight of the replica, black nylon material on outside with red stitching, which perfectly echoes with the black and red color usage on its bezel and dial. The inside that contacts your skin uses leather material that can guarantee a very good wearing comfort, I like this watch very much, I want to buy one, but I already have so many Rolex watches in my collection, if you like carbon watch, this one must be recommended.

VSF Replica Panerai PAM 1661 Forged Carbon Watch with Super Clone P.9010

Posted on June 2, 2020 by Jason

According to the Chinese lunar calendar, PAM 1661 is the first Panerai replica watch published in 2020, Panerai was my most favorite watch in the past, maybe I was attracted by its unique case and dial design at that time, and its history is really glorious, in my opinion, I thought every man should own one Panerai, but today, I do not think so, I still think Rolex is the king in watch industry, it represents reliability and stability, so, sometimes buying one Rolex watch will be a wiser choice, as your first watch, I recommend Rolex, especially its Submariner. About the big guy Panerai, I have seen many big PAMs made of various materials, I am tired now, its big case and unique crown bridge do not attract me any more, now I like simple and formal style. So, the Panerai replica watch I am going to introduce to you, why I give its review here, not because I like this watch, it is because this watch is just a new model in our market, the reason is simple, it is a new PAM.

Replica Panerai Luminor Marina Forged Carbon

The replica Panerai PAM 1661 is made by VS factory, yes, I only recommend VS factory if you want the best clones of Panerai watches, and only VS factory has the most complete collection of Panerai replica watches. Since the end of 2019, Panerai published some new watches, almost all of them use forged carbon material, including this PAM 1661, it seems like Panerai paid their all attention on watch materials, rather than developing new design. The boom of the Swiss watch industry has passed.

44mm case is made with forged carbon, VS factory said the carbon patterns you saw on the replica are the same as the ones on genuine, do you think so? They said this just to promote their products, actually the forged carbon material is not the same, if this replica uses the same forged carbon, why it is sold at a such cheap price, that’s ridiculous, sometimes it is better for the factory to tell our clients the truth, the carbon textures you see on the case, if you really compare them with a genuine in a Panerai boutique, you will find the difference, so, even it is a replica, I do not suggest you buy a forged carbon Panerai, because you will not have the courage to wear it in a Panerai watch store, even the forged carbon model looks very cool. There are many good quality Panerai replica watches in stainless steel from VS factory, you can find one. By the way, the case is too thick.

Black dial looks ok for me, the blue color on the black dial catches my eyes immediately, dial is in sandwiched construction, the blue luminescence applied on the bottom plate is shown through the skeletoned hour markers on top. The matte finish on black dial is fine completed, Panerai’s dial is always simple and has a good readability, maybe that’s the only reason I will consider if you want me to choose a Panerai right now. The case back is solid and has been correctly engraved, behind the back, there is a super clone P.9010 movement lying inside, although the movement is developed by VS factory themselves, it still has room for improvement, to enhance the power reserve energy and slim it down, so that the entire case will not be that thick, VS factory still has a lot of work to do, but it seems like they has stopped their pace to improve their Panerai products, that’s not a good news.

Ultimate Edition of Replica Richard Mille RM27-03 Black Forged Carbon with Miyota 9015 Movement

Posted on March 13, 2019 by Jason

I seldom paid a close attention to Richard Mille before, but when I saw this Rafael Nadal limited edition several days ago, I found I should have pay more attention to this Swiss brand, because it is so unique and the dial design is amazing. This Richard Mille Rafael Nadal edition belongs to RM27-03 series, it is in entire black, whether in its black appearance or the skeletonized dial, the watch looks very cool. The following pictures show a replica of this watch, it is made by a factory with unknown name, but has been in the field of replicating Richard Mille for more than seven years. The factory makes this replica watch in black, yellow and red color options, today, I only introduce the black version.

Replica Richard Mille Rafael Nadal RM27-03

The Richard Mille RM27-03 replica watch is completely made of real forged carbon in black. The black case has forged carbon patterns that look unique, the crown also has a black forged carton top and red rubber surrounded. On the matte finished case surface, there are eight hole, each with a star-shaped screw inside. The tonneau-shaped case of Richard Mille has a large curvature to connect the rubber straps better, so the arc-shaped case and rubber band can fit your hand in a more comfortable way. In my opinion, the case design of Richard Mille is more in line with ergonomic standards than other Swiss watches.

Replica Richard Mille Forged Carbon Case

The dial has a skeletonized structure, inner bezel is black and features red dotted hour markers. There are yellow minute scales on black inner bezel corresponding to the yellow top of hour and minute hands. A big tapered anglage on the center is the most iconic feature of the replica Richard Mille watch. The tapered anglage on the replica has the same finish as that of genuine watch. It is hand-polished in graceful satin surface.

Behind the forged carbon case back, the machine is a genuine Japanese Miyota 9015 automatic, this movement has a high accuracy and stability. And Miyota 9015 is considered to be one of the best movements that have the lowest repairing rate. So, the replica not only has a cool black outlook, but also with a reliable movement, it is absolutely the best choice for Rafael Nadal fans. The following are more details for you to know the watch better.

Movement: Genuine Japanese Miyota 9015 Automatic
Case: 40mm*17mm, Full Solid Black Forged Carbon
Case Back: Solid Black Forged Carbon with Correct Engravings
Crystal: Sapphire
Dial: Custom Skeletonized Dial with RM27-03 Lettering, Black Inner Bezel, Lumed Hour Markers and Hands, Strong Green Lume in The Dark
Bracelet: Black Rubber Strap
Water Resistant: 30m

Richard Mille RM27-03 Forged Carbon Case Back

Replica Richard Mille RM035-02 Red Forged Carbon Case with Miyota 9015 Movement

Posted on February 25, 2019 by Jason

Full forged carbon Richard Mille replica watch in red color, let’s see its specification first.

Movement: Genuine Japanese Miyota 9015 Automatic, Decorated Movement Plates and Auto Rotor.
Case: 43mm*17.5mm, Solid Red Forged Carbon Case
Bezel: Red Forged Carbon
Crystal: Sapphire
Dial: Skeletonized, Yellow Printings “RICHARD MILLE” and “RM35-02 RAFA”
Bracelet: Red Vented Rubber Band with Deployant Clasp
Water Resistant: 50m

The red watch is a limited edition model Richard Mille designed for Rafael Nadal, who is one of the greatest tennis players. Richard Mille has made a lot of amazing watches that almost cover every RM series, which include RM035 and RM027. Today, this replica Richard Mille watch I am going to review is made by a factory that has an unknown name, some watch dealers told me this factory only makes Richard Mille replica watches, their Richard Mille watches are the best in the market. Check this Richard Mille RM035-02 Rafael Nadal Limited Edition replica, when I first saw it, I thought the watch is fully made of red rubber material, actually it is forged carbon, it is not the first time for forged carbon material to be used by replica watches, but this is the first time for a replica watch to use red forged carbon, this material has a big advantage, which is very light in weight, so although the watch looks very big, it is extremely comfortable to wear.

Richard Mille is one of the watches I mostly love to wear, because its tonneau-shaped case has a larger arc shape that looks more obvious, so the case can fit your hand better. Real forged carbon bezel has star-shaped screws in matte finish. Case back is see-through sapphire crystal, you can clearly see decorated movement rotor and plates.

The dial is beautiful, first, it is skeletonized, you can see the working machine parts, which are full of mechanical beauty. Second, such skeletonized dial is just a good chance for you to appreciate the complicated structure of the movement. Black inner bezel has red minutes markers, the beveled inner bezel increases the stereo feeling of the dial. Central hour and minute hands are skeletonized, while second hand has a red tip. On the four corners of the dial, there are screws to fix the movement stably.

Rubber band is also in red, which looks darker than the red forged carbon case. The rubber band does not have bad smell, it is made of natural rubber material imported from Thailand. With arc-shaped case and this rubber band, the watch could be a perfect fit for your wrist. It will be a good partner when you exercise. The striking red color is also a big attraction for other watch fans.

VS Factory V2 Edition Replica Panerai PAM 616 Luminor Submersible Carbotech with Clone P.9000 Movement

Posted on December 19, 2018 by Jason

Certainly, in automatic watch field, Rolex Submariner is the most popular diving watch, I agree with this point of view, its superior stability and accuracy have won a lot of praise from amateur and professional divers. Rolex and Panerai are two of my most favorite watch brands, while they differentiate from each other greatly. Rolex has a wide product line that covers production of dress watches and a lot of functional watches like diver’s watches, GMT and explorer watches. While as a military watch specially made for the Italy Navy, Panerai is born to be a diving watch, whether its Luminor, Radiomir or Luminor Submersible, these Panerai models all integrate the design elements of diver’s watches. Besides, compared with Submariner, Panerai uses more advanced materials in the making of Luminor Submersible, in recent years, they added bronze and carbon two new materials in the design of Luminor Submersible. I think this is also the reason why more and more watch fans choose to wear Panerai.

VS Replica Panerai Luminor Submersible CarboTech

Today, I want to give a review on a replica Panerai Luminor Submersible watch that has a very cool outlook. Its reference is PAM 616. The replica watch is made by VS factory and this is the V2 upgraded version, which was just published in December, 2018. The genuine watch is made of new material Carbotech Panerai developed, while the replica has a case that is fully made of forged carbon, which has detailed and grained textures like genuine Carbotech case. Forged carbon is light in weight but highly scratch resistant. You can find these unique patterns are more obvious on the case side. The case back is blackened metal, it is solid and engraved with a lot of information, which includes the special S.L.C. logo.

Black dial has a good matte texture. There are big 12 and 6 numeral markers, other hour markers are small dots with blackened metal edge. The dial does not have too many things to talk, the things that attract me most are the light blue small second hand and “CARBOTECH” printing. The small square window opened at 3 o’clock features white date font in black background. By the way, all hour markers and hands are applied with Swiss grade Patina Superlume, the dial lume is authentic green, strong and long lasting.

The Panerai PAM 616 replica uses a black rubber band, the factory also offers one pair of blue leather straps for free. The Pre-V buckle fitted on the band has black PVD coating processing. Rubber band is the best match of this Panerai Luminor Submersible watch because it is dustproof and waterproof, more convenient to wear than the leather band. A lot of tough men love to wear Panerai watch, Sylvester Stallone is a big fan of Panerai and the Rock Dwayne Johnson wore this PAM 616 in movie Fast 8.

At last, the replica is an upgraded version from V1 edition, its time could be independently adjusted, while the date needs to be adjusted through hour hand. The time and date adjustment is the same as genuine.

XF V2 Edition Replica Audemars Piguet Diver 15706 Forged Carbon Watch with Super Clone 3120 Movement

Posted on October 10, 2018 by Jason

Audemars Piguet Royal Oak Diver Replica

XF Audemars Piguet 15706 Diver

XF Audemars Piguet Diver Replica

Audemars Piguet Royal Oak is the most masculine watch, it has a case with obvious edges and clear lines, octagonal bezel is fixed by eight screws, each detail is very tempting for me. If you had experience in buying replica watches, you will know that J12 factory makes the best replica Audemars Piguet watches, but after the release of this Audemars Piguet Diver 15706 replica by XF, I changed my opinion, the factory that could be able to challenge J12’s dominance appeared, that is XF. After reading my review, you will know my saying is right. XF is not a new factory, actually it has been very familiar to us, it was previous KW or V6 factory. I do not know why they changed their factory name in 2018. Now, let’s back to this replica watch, it is the latest V2 edition of Audemars Piguet Diver 15706, every detail has reached to be a perfect replicating level.

Audemars Piguet 15706 Black Dial

AP Diver Checkered Dial

AP 15706 Date

AP 15706 300m AUTOMATIC

The case is completely made of forged carbon, take a closer look at the case, it has special carbon patterns, and the forged carbon case makes this big watch feel light when wearing. Bezel is made of high grade black ceramic, the replica watch has a very high-level case construction, which is the same as genuine watch. Between the case and bezel, there is one gasket made of black rubber to guarantee better water resistance. The surface of the black ceramic bezel is brushed and feels high quality textured. However, the case finish still has not reached to the level of J12 AP replicas. On the solid case back, central relief “Royal Oak Offshore” is polished in sandblasting background.

AP Steel Crown

AP 15706 Ceramic Bezel

Black dial is checkered, there are stick hour markers in white, hour markers and Arabic numerals on the beveled inner bezel are applied Swiss Superlume material. The dial will have a strong green lume light in the dark. Minute hand and the tip of the central second hand are in yellow color, which is in line with the yellow inner diving bezel. The dial has a great finish, date window is positioned at 3 o’clock, white date font is centered in the window and has the same font size and thickness as genuine AP 15706.

AP Royal Oak Offshore Engravings

Royal Oak Offshore on Back

Compared with J12 AP 15706, the biggest advantage of XF replica AP 15706 is that it is equipped with a Swiss ETA 2836 movement. I mean this replica uses a genuine Swiss ETA movement, the factory modified the auto rotor and movement plates so that it looks like AP 3120 Caliber. XF made this clone 3120 movement on basis of a genuine ETA 2836, so the movement will work more accurate and stable. The following are details of the replica. By the way, the factory also offers one pair of XS black and yellow rubber strap for this watch.

AP Engraving on Buckle

Movement: Modified AP 3120 Caliber on Basis of Genuine Swiss ETA 2836-2 Automatic, 28800BPH
Case: 42mm*12mm, Solid Forged Carbon
Bezel: Black Ceramic
Crystal: Sapphire with Colorless AR Coating
Dial: Black with Superlumed Hour Markers and Hands
Bracelet: Black Rubber Strap with Tang Buckle
Water Resistant: 50m

AP 15706 Wrist Shot

AP 15706 Diver Wrist Shot

Replica Watches Review

Honest reviews on watches and dealers

Tag Archives: Forged Carbon