Miyota 9015 – Mens Replica Watches Club

November 11, 2019

P Factory Replica Roger Dubuis Excalibur DBEX0535 Blue Dial with Miyota 9015 Movement

I have a little knowledge about Roger Dubuis, it seems like this brand is not as popular as other Swiss brands like Rolex, Panerai, Audemars Piguet, etc. I also did not give reviews on too many Roger Dubuis replica watches, because there are few top quality replicas of Roger Dubuis, in my opinion, its unusual dial design attracts me, but I do not think it is very suitable to be used as a timepiece for daily wearing. Sometimes, one or two tourbillon watch from this brand may attract the attention of watch fans all over the world, so, among all current Roger Dubuis models, the one that is worth of purchasing is that tourbillon watch from Roger Dubuis.

Replica Roger Dubuis Excalibur DBEX0535 Blue Watch

Replica Roger Dubuis Excalibur Blue Dial

However, in this morning, when I walked in the street to get watches for my clients, I found this Roger Dubuis replica watch, even with an unusual dial, but this watch looks normal than previous Roger Dubuis watches I have seen, it is more suitable for daily wearing if you are exactly finding one.

P factory only made Patek Philippe replica watches before, I do not know why they produced this Roger Dubuis this time, the potential commercial opportunity, maybe, but I did not see any market opportunity which this replica watch will have. This replica watch also has a very embarrassed status, it is a little higher than the moderate quality replica watch, but not as good as the best replica watch in our market, however, the replica is sold at a high price, nearly $460 usd, so I said this is a very embarassed watch, no big need, not suitable for daily wearing, not the best replica, but sold at a very high price. I think P factory should not publish such unpopular replica watch, because they still have other important things to do, like improving their flagship Nautilus and Aquanaut.

The watch looks bigger than it should be, due to its thin bezel, the blue dial looks very big, with exaggerated Rome markers in white color. A small dial is positioned at 6 o’clock, with a small second hand in silver tone. The date window is set inside the small dia. Central hour and minute hands not only have several cutting faces, but are also very in line with the style of Rome hour markers, the entire dial is in an unified style.

Roger Dubuis Excalibur DBEX0535 Movement

Here is the specification of this Roger Dubuis, any interest, please contact me.

Movement: Japanese Miyota 9015 Automatic, 24 Jewels, Decorated Rotor and Plates to Look of Genuine RD830 Calibre
Case: 42mm*11.5mm, Solid 316L Stainless Steel
Crystal: Sapphire with AR Coating
Dial: Dark Blue with Rome Markers
Bracelet: Dark Blue Embossed Calfskin Leather Strap with Deployant Clasp
Water Resistant: 30m

Roger Dubuis Excalibur DBEX0535 Blue Leather Strap

Roger Dubuis Excalibur DBEX0535 Wrist Shot

October 11, 2019

MKS Factory Replica IWC Spitfire Bronze Watch with Miyota 9015 Movement

Since the release of Panerai PAM 382 Bronzo, more brands started to publish their bronze models, among these brands, IWC is the most popular brand that has several attractive bronze watches, in my previous posts, I introduced several IWC bronze watches, they are Spitfire Chrono IW387902 and Spitfire UTC MJ271, the former is made by Z factory, the Spitfire UTC is coming from XF factory, both are good quality replica watches.

In my memory, among all replica watches that are made with bronze material, the most popular is PAM 382 from Panerai, now this watch is still a best seller in our market. Next it is the Tudor Black Bay Bronzo made by XF factory. Today, we will welcome another bronze watch from IWC, please check photos in this post, I think it will become another hot IWC replica watch, based on the design of classic IWC Pilot, this Spitfire will absolutely beome a hot IWC under its bronze tone outlook.

MKS is one of the earliest factory that makes good quality replica IWC watches, especially the Mark series replica watches made by them, very popular all over the world, the factory also got its name MKS because of this. Now back to this bronze Spitfire, like other bronze watches, it has a classic match, bronze case with green dial. The entire bronze case is matt finished, the case is solid bronze, so you do not worry about fade of bronze tone, but it will absolutely be oxidized. In producing IWC replica watches, MKS has multiple core technologies and years of experience, so they make the case of every IWC watch very accurately. The size of this watch is 39mm*10.5mm, very suitable for most people.

The dial is green, but it does not look so green, it is a little dark, maybe this is the green dial in bronze watch that is closest to original watch. Hour markers adopt Arabic numerals in white color, the lettering “SPITFIRE” is in bright red. There is a opening window at 3 o’clock that is displaying current date, black date font in white background, it is clearly readable.

Brown leather strap is a perfect match for this IWC bronze watch, it is in a color very close to bronze tone of the case. By the way, MKS factory adopts imported Italian calfskin leather to make this leather band. Now it comes to the inside machine, the replica uses a genuine Japanese Miyota 9015 automatic movement, this is the automatic movement that has the fewest repairing rate in our market, the No. 1 best movement, with Miyota 9015, it is not a problem at all for this replica to work more than three years.

August 9, 2019August 1, 2019

Z Factory Replica Patek Philippe Calatrava 5227G with Miyota 9015 Movement

Sports watch is the most favorite for men, while a common dress watch is also necessary because it acts an important role when you attend some formal occasions like business meeting. There are a lot of dress watches from different brands for you to choose, my favorite is IWC Portuguese, while some people who like extra-thin watch can choose Patek Philippe Calatrava. Here the one I am going to introduce is exactly a PP Calatrava model, which brings out the simple design to the most extent.

Replica Patek Philippe Calatrava 5227G Black Dial

Z factory makes this replica Patek Philippe Calatrava, whose genuine reference is 5227G. Actually about Patek Philippe Calatrava, only Z factory is making its replica, no other big factories have made the replicas of it. So, if you want the best Patek Philippe Calatrava replica watch, just go with Z factory.

Stainless steel case, black dial and black leather strap, this is a classic match for most dress watches, it not only looks elegant, but also feels comfortable to wear. The replica watch has a stainless steel case measured to be 39mm in diameter, the 39mm case is not that large like sports watches, it is very suitable for most men’s wrist. The case has a 10.2mm thickness that is very close to a genuine Patek Philippe Calatrava. The case is fully polished, it is slightly curved so that can fit your wrist better.

Replica Patek Philippe Calatrava Stainless Steel Case

Replica Patek Philippe Calatrava 5227G Crown

The dial is extremely simple, Z factory makes the date window correct, with right date font size and color. The central hour hand and minute hand are molded by experienced watch master with superb skill, look at the surface, it is not flat but has several cutting faces that look more three-dimensional than those cheap replica watches from small factories.

Patek Philippe Calatrava Solid Case Back

The replica Patek Philippe watch is equipped with a genuine Japanese Miyota 9015 movement, because this movement was brought in to our industry, the quality of replica watches was greatly improved, the inaccuracy and instability are also reduced. It seems like the Miyota 9015 is the best match for this replica watch, it helps to build such a thin case.

Patek Philippe Calatrava Black Leather Strap

July 26, 2019July 26, 2019

Z Factory Replica Patek Philippe Aquanaut 5167R Rose Gold Watch with Brown Rubber Strap

Replica Patek Philippe Aquanaut Rose Gold

Every body said that Patek Philippe is unattainable, yes, but that only means to certain models, while most watches from Patek Philippe have acceptable prices. The complicated models from Patek Philippe are very expensive and hard to be replicated very closely. However, the sports Nautilus and Aquanaut are also very important models for Patek Philippe, especially Nautilus, it is one of the best-selling sports watches in recent years, its popularity is next to Royal Oak from Audemars Piguet and Big Bang from Hublot.

I have mentioned that PP factory makes good quality Patek Philippe Nautilus replica watches, and I also introduced several Nautilus and Aquanaut models here on my blog. Today, I want to show you a good Aquanaut watch from another factory, which is Z factory, we call it ZF here. Too many factories have published the replicas of Patek Philippe Aquanaut, but this version from ZF has its own advantages, let me show you.

First, the case thickness is closer to genuine watch. The case is only 8.8mm thick, which makes it the thinnest replica watch in our market. The case is made of 316F stainless steel and then being plated with 18K rose gold, the brushing treatment on the rose gold case is special, which is 1:1 treatment like genuine. In my opinion, whether from outlook, brushing or curvature, this is the case on Aquanaut that is closest to genuine.

Replica Patek Philippe Aquanaut Miyota 9015 Movement

Replica Patek Philippe Aquanaut Miyota 9015 Movement 1

Second, the dial, it is in brown color and has the checkers that are closer to genuine than any other versions. The brown color is somewhat similar to chocolate, which is in line with the brown rubber strap. The brown dial has a great texture, the checkers on the dial make it look like a grenade. The hour hands and hour markers are fully filled with Swiss lume, the entire dial will have a strong lume light in dark conditions.

Replica Patek Philippe 5167R Brown Rubber Strap

On the brown rubber strap, there are same checkers like the dial, the band comes with a rose gold deployant clasp that has been engraved with Patek Philippe Logo. The band is made of high quality natural rubber material imported from Malaysia, it is soft to wear and dustproof.

From the crystal back, you can see a great machine inside. ZF uses a Miyota 9015 automatic movement as a basic movement, then decorates it to the look of genuine Patek Philippe 324CS. Now on all versions of replica Patek Philippe Aquanaut, this movement from ZF is the only edition in our market with the correct balance wheel position like genuine. The clone movement is beautiful because of its correct golden emblem and engravings on the rotor and movement plates. Besides, this is also the clone PP 324CS movement that has the fewest repairing rate.

May 13, 2019

CR Factory Replica Cartier Ballon Bleu 42mm Two Tone Rose Gold Watch with Miyota 9015 Movement

Ballon Bleu is one of the best-selling Cartier watches, it offers a lot of styles for men and women to choose. There are also Ballon Bleu models in different sizes, which include 28mm, 33mm, 36mm and 42mm. So, you can always find the right Ballon Bleu that can meet your wrist size. In our watch market, there are a lot of factories that manufacture Cartier Ballon Bleu replica watches, among them, V6 makes the best. However, some small factories that also make Ballon Bleu have their own advantage, which is cheap price. This replica Cartier Ballon Bleu I am about to share with you is made by CR factory, the watch has a large face, and there are two models for you to choose, both are in two tone style, one with rose gold, the other with yellow gold.

Replica Cartier Ballon Bleu 42mm Two Tone

Replica Cartier Ballon Bleu Rose Gold 42mm

The case is 42mm in diameter, so the watch face looks very large. With short lugs, the white dial framed by the polished round bezel even looks larger. Rose gold crown with spinel is protected by the arched bridge on the right. The whole piece of case is polished, there is thick layer of 18K rose gold plated. Solid case back is brushed with polished screws being fixed. The “Cartier” is deeply engraved, with darker sandblasting finish which contrasting with the brushing.

The dial is white with large black Rome numeral markers. The circle on the center of the dial has unique sunray patterns, the circle has depth. Three hands on the center are blued steel. You may concern about the date window at 3 o’clock, it is oval-shaped with a black frame on outside. Date font is black in white background, the thickness and position of date font in that aperture are 100% the same as original.

Two movement options are available. One is with clone 1847MC that is based on Japanese Miyota 9015 automatic. The other is Asia ETA 2824. Both movements are reliable. If you have to make a choice between them, I sugget you buy the one with Miyota 9015 movement. Absolutely this one is also with a higher price.

The 42mm Ballon Bleu Cartier watch may be too large for most people, if you have any other Ballon Bleu models in need, please send me their photos, there are so many good quality replicas of Cartier Ballon Bleu in our market, I am very sure there will be one that meets your need.

April 15, 2019

BV Factory Replica Cartier Santos 100 XL 40mm Ros Gold Watch with Miyota 9015 Movement

This is the first time for me to see such a full rose gold Cartier Santos watch, in the past, I only saw yellow gold or rose gold Ballon Bleu models from Cartier. We all know Cartier is a big brand, it is even more famous than all other Swiss brand watches because it does not only make good watches for men and women, it also builds a jewelry world. Their jewelry kingdom is admired by a lot of brands. In replica watch industry, the best Cartier replica watches come from V6 factory, yes, whatever it is Ballon Bleu or Santos, you must choose one from V6. In recent months, a new factory BV appeared in our market, today, this Cartier Santos 100 replica watch I am going to introduce is made by BV, it has a full rose gold outlook, which must look shiny on your wrist. Some people like this bright golden color, some people prefer the white stainless steel models, whatever, you can tell me by leaving comments.

The case is made of solid 316L stainless steel with real 18K rose gold plating, which is measured to be 5 mils thick. Although the case has a diameter of 40mm and is up to 47.5mm in length, it is only 9mm in thickness. When you check the case side, it looks like the entire case has a certain degree of arc, the replica case is 1:1 original made according to genuine watch disassembled. The bezel has small one-world screws being fixed. On the right case side, the crown is embeded with a black spinel on top, and under protection of two crown guards. Case back is solid 18K rose gold with delicate engravings in depth.

The dial is white with large black Rome markers and blue steel hands in the center. Like genuine watch, on the Rome marker “Ⅶ”, there are letters “CARTIER”. A date window is positioned at 6 o’clock. The date window has black date font in grey background, which increases the visibility of the whole dial.

Cartier Santos 100 XL Rose Gold Bracelet

Besides 18K rose gold coating on case and bracelet, the Cartier replica watch also has another big advantage, which lies in its bracelet. That is the bracelet has two practical functions, smartlinks and quickswitch link change system. With these two features, you can change the bracelet and remove links quicker than before. Besides, the bracelet of this replica can be completely interchanged with that of genuine.

At last, the inside movement of the replica is a Japanese Miyota 9015, together with Asia ETA 2836 and 2824, these are the most stable movements in fake watch market.

Cartier Santos 100 Rose Gold Watch Wrist Shot

March 13, 2019

Ultimate Edition of Replica Richard Mille RM27-03 Black Forged Carbon with Miyota 9015 Movement

I seldom paid a close attention to Richard Mille before, but when I saw this Rafael Nadal limited edition several days ago, I found I should have pay more attention to this Swiss brand, because it is so unique and the dial design is amazing. This Richard Mille Rafael Nadal edition belongs to RM27-03 series, it is in entire black, whether in its black appearance or the skeletonized dial, the watch looks very cool. The following pictures show a replica of this watch, it is made by a factory with unknown name, but has been in the field of replicating Richard Mille for more than seven years. The factory makes this replica watch in black, yellow and red color options, today, I only introduce the black version.

Replica Richard Mille Rafael Nadal RM27-03

The Richard Mille RM27-03 replica watch is completely made of real forged carbon in black. The black case has forged carbon patterns that look unique, the crown also has a black forged carton top and red rubber surrounded. On the matte finished case surface, there are eight hole, each with a star-shaped screw inside. The tonneau-shaped case of Richard Mille has a large curvature to connect the rubber straps better, so the arc-shaped case and rubber band can fit your hand in a more comfortable way. In my opinion, the case design of Richard Mille is more in line with ergonomic standards than other Swiss watches.

Replica Richard Mille Forged Carbon Case

The dial has a skeletonized structure, inner bezel is black and features red dotted hour markers. There are yellow minute scales on black inner bezel corresponding to the yellow top of hour and minute hands. A big tapered anglage on the center is the most iconic feature of the replica Richard Mille watch. The tapered anglage on the replica has the same finish as that of genuine watch. It is hand-polished in graceful satin surface.

Behind the forged carbon case back, the machine is a genuine Japanese Miyota 9015 automatic, this movement has a high accuracy and stability. And Miyota 9015 is considered to be one of the best movements that have the lowest repairing rate. So, the replica not only has a cool black outlook, but also with a reliable movement, it is absolutely the best choice for Rafael Nadal fans. The following are more details for you to know the watch better.

Movement: Genuine Japanese Miyota 9015 Automatic
Case: 40mm*17mm, Full Solid Black Forged Carbon
Case Back: Solid Black Forged Carbon with Correct Engravings
Crystal: Sapphire
Dial: Custom Skeletonized Dial with RM27-03 Lettering, Black Inner Bezel, Lumed Hour Markers and Hands, Strong Green Lume in The Dark
Bracelet: Black Rubber Strap
Water Resistant: 30m

Richard Mille RM27-03 Forged Carbon Case Back

March 5, 2019

J12 Factory 1:1 Ultimate Replica Audemars Piguet Royal Oak Diver 15707 Ceramic Watch with Clone 3120

Nowadays in watch industry, Audemars Piguet has beaten many Swiss watch brands such as Breitling, Bell Ross and Tag Heuer, it has become a flagship brand among all Swiss sports watches. The big case and octagonal bezel are two big features of Audemars Piguet, you can notice this big watch at a glance. Royal Oak is the most popular sports series of Audemars Piguet, it is also very famous among all sports watches. The Royal Oak Diver is very new to us, it was just a new series published by Audemars Piguet several years ago. Now Royal Oak Diver has a lot of popular models such as 15703, 15710 and 15707. These models are also hot targets in replica watch industry, they have been replicated by a lot of factories, among them, I think J12 makes the best replica Audemars Piguet Diver watches. First, the case finish which J12 factory does in all Audemars Piguet replica watches is the best, this has been proven by the professionals in watch forums. Seconds, J12 is the factory that firstly developed Asia 3120 movement and installed their Audemars Piguet, now this movement researched two years ago has been improved by J12 for several times, so, the accuracy and stability are much better now. Third, about Audemars Piguet Diver watches, especially 15703 and 15707, J12 factory has upgraded their details for more than three times, now, this final edition is an ultimate 1:1 replica, if you have read my previous post about the Diver 15703, you will know how good the JF Audemars RO Diver is.

Replica Audemars Piguet Royal Oak Diver Orange

JF Factory Replica Audemars Piguet Royal Oak Diver

Replica Audemars Piguet 15707 Black Checkered Dial

The 42mm case plus its octagonal bezel looks big, however, the case is not thick, it is only 12mm. The entire case and bezel are made of black ceramic, the brushing finish on the case is the same as that of genuine watch. There are eight stainless steel screws fixed on the bezel, look at care carefully, its edge is finely processed, which feels very smooth. The whole case is full of angularity and mechanical beauty, especially its case side. The crown has delicate “AP” engraving in sandblasted finish.

Black checkered dial has every detail that is made very close to genuine dial. The black dial has a very good readability, not only because of the Swiss lume material applied on hour markers hands, but also the orange color on inner bezel rehaut and minute hand increases readability. The lume on the dial is very strong and long lasting. Central second hand is very unique, the orange lume dot and tip are very attractive.

Crystal case back shows the movement clearly. Now this Super Clone 3120 is the third generation of 3120 from J12 factory. The decoration on the golden auto rotor is upgraded, the sculpture on the rotor is 1:1 cloned from genuine AP 3120. While on the movement plates, there are golden engravings, the jewels have a correct tone. The mechanism of this Super Clone 3120 is genuine Miyota 9015, so the stability of the movement could be guaranteed.

Replica Audemars Piguet 15707 Crystal Back

Now, the review is done, let’s check the full specification of the replica watch.

Movement: Super Clone 3120 Based on Japanese Miyota 9015 Automatic, Platinum Plated Movement Plates and Decorated Auto Rotor, Currently The Best Clone 3120
Case: 42mm*12mm, Black Ceramic
Bezel: Imported Balck Ceramic Material
Crystal: Sapphire with Colorless AR Coating
Dial: Black Checkered Dial with Super Green Lume on Markers and Hands
Bracelet: Black Rubber Strap with Tang Buckle
Water Resistant: 50m

Replica Audemars Piguet 15707 Clone 3120

March 4, 2019

Replica Franck Muller Vanguard V45 T SQT Real Carbon Watch with Miyota 9015 Movement Black Gummy Strap

Replica Franck Muller Vanguard Tourbillon

It is a very cool watch that is made of black carbon and features a skeletonized dial. I am surprised when I first saw the replica watch, I thought it must be made by a big factory, however it is not, the replica is the newest Franck Muller watch, now it is still not sold on the websites of most watch dealers, but if you are interested in the watch, I can get one for you directly from the factory. Carbon, which is a lightweight material, now is widely used in watch industry, a lot of replica watches also use this material, like the popular Audemars Piguet Diver, Richard Mille Nadal edition, etc. Yes, I have to admit that replica watches using carbon material are usually sold at much expensive prices than watches made of other materials, however, they not only look more sporty, but also are comfortable to wear.

Replica Franck Muller Fake Tourbillon Window

The replica watch comes from the famous Vanguard series of Franck Muller, genuine watch is a Vanguard Tourbillon watch, while the replica does not have a real tourbillon. Many watch dealers online sell fake tourbillon watches at the prices of genuine models, do not be cheated by them. This Franck Muller Vanguard replica is equipped with a Miyota 9015 movement, not a tourbillon. The case is 44mm in diameter, 54mm in length and 14mm in thickness, it is made of real carbon, which features unique patterns that look very cool. The case of Franck Muller does not have lugs, it is in tonneau-shaped, the whole case has a big curvature, it can fit your wrist better, more convenient to be worn on your hand.

Look at the dial, it is skeletonized, actually it is not a dial, the movement components are showing in front of your eyes. The movement is highly decorated, extra plates are removed and only useful machine parts are kept, then the whole movement is fixed to the inner wall of the case. You can see a working part at 6 o’clock, many people mistakenly thought that this is a tourbillon device, but it is just the working balance wheel, on its above, the factory added extra supports that are very similar to Franck Muller Logo.

The watch band is black gummy, there are two loops on the strap with buckle. The gummy strap is very suitable for people who do not want your watch to slide back and forth on your wrist.

February 25, 2019

Replica Richard Mille RM035-02 Red Forged Carbon Case with Miyota 9015 Movement

Full forged carbon Richard Mille replica watch in red color, let’s see its specification first.

Movement: Genuine Japanese Miyota 9015 Automatic, Decorated Movement Plates and Auto Rotor.
Case: 43mm*17.5mm, Solid Red Forged Carbon Case
Bezel: Red Forged Carbon
Crystal: Sapphire
Dial: Skeletonized, Yellow Printings “RICHARD MILLE” and “RM35-02 RAFA”
Bracelet: Red Vented Rubber Band with Deployant Clasp
Water Resistant: 50m

The red watch is a limited edition model Richard Mille designed for Rafael Nadal, who is one of the greatest tennis players. Richard Mille has made a lot of amazing watches that almost cover every RM series, which include RM035 and RM027. Today, this replica Richard Mille watch I am going to review is made by a factory that has an unknown name, some watch dealers told me this factory only makes Richard Mille replica watches, their Richard Mille watches are the best in the market. Check this Richard Mille RM035-02 Rafael Nadal Limited Edition replica, when I first saw it, I thought the watch is fully made of red rubber material, actually it is forged carbon, it is not the first time for forged carbon material to be used by replica watches, but this is the first time for a replica watch to use red forged carbon, this material has a big advantage, which is very light in weight, so although the watch looks very big, it is extremely comfortable to wear.

Richard Mille is one of the watches I mostly love to wear, because its tonneau-shaped case has a larger arc shape that looks more obvious, so the case can fit your hand better. Real forged carbon bezel has star-shaped screws in matte finish. Case back is see-through sapphire crystal, you can clearly see decorated movement rotor and plates.

The dial is beautiful, first, it is skeletonized, you can see the working machine parts, which are full of mechanical beauty. Second, such skeletonized dial is just a good chance for you to appreciate the complicated structure of the movement. Black inner bezel has red minutes markers, the beveled inner bezel increases the stereo feeling of the dial. Central hour and minute hands are skeletonized, while second hand has a red tip. On the four corners of the dial, there are screws to fix the movement stably.

Rubber band is also in red, which looks darker than the red forged carbon case. The rubber band does not have bad smell, it is made of natural rubber material imported from Thailand. With arc-shaped case and this rubber band, the watch could be a perfect fit for your wrist. It will be a good partner when you exercise. The striking red color is also a big attraction for other watch fans.