August 2018 – Mens Replica Watches Club

August 30, 2018

Noob Factory V9 Replica Rolex Submariner 116610LN Black Ceramic Bezel 904L Steel Case with Super 3135 Movement

Noob Replica Rolex Submariner Black

Noob factory has always been the benchmark of the replica watch industry. Whether the outlook of their replica watches or materials, they have a big advantage. Since the release of their first generation of Submariner replica watch several years ago, Noob factory continuously improved manufacturing processes and selected high quality imported materials to build the best replica watches that are closest to genuines. If you have read my another review about Rolex Submariner 116610LV, you will be surprised by its exquisite workmanship and reliable engine inside. Now both 116610LN and 116610LV made by Noob have the highest V9 version, their finish represents the highest level in our watch market. Noob Rolex Submariner 116610LN V9 has a lot of places that have been updated, the following article will list some improved details that are most important to you.

Replica Rolex Submariner 116610LN

The case is made of 1:1 high quality 904L stainless steel, it is measured to be 40mm in diameter and 13mm thick. The case edge is polished to be more smooth, actually the biggest improvement on V9 lies in its bezel, the black ceramic bezel looks brighter, the engravings on the bezel are closer to Platinum tone of genuine Rolex Submariner, at the same time, the engravings also have a stronger three-dimensional feeling. Overall, V9 has a ceramic bezel that is closest to genuine.

V9 Replica Rolex Submariner 116610LN

The black dial of V9 Submariner looks warm, the white printings have a brighter font, while the font on V7 and V8 looks a little gray. About dial lume, it is very strong, the blue lume on hour markers and hands can last for a long time in the dark. Noob factory always used genuine Swiss lume material on their Rolex replicas. Dial window positioned at 3 o’clock has black font in white background, the date font is centered and in correct thickness, while the magnifier on crystal over the date window is 2.5X.

Replica Rolex Submariner 116610LN Black Dial

About the sapphire crystal, see it at a certain angle, you will find a laser Rolex Crown Logo in the crystal at 6 o’clock, this is an important feature of this Rolex Submariner replica.

Replica Rolex Submariner 116610LN 904L Case

Replica Rolex Submariner 116610LN Crown

The bracelet is made of solid 904L stainless steel, it feels more smooth than any previous versions, the edge of the bracelet is well processed so there are no metal burrs, you can not feel being scratched by case edge. When opening the clasp, you will find fine engravings inside, in polished background, not satin-finished.

Replica Rolex Submariner 116610LN Diver Bezel

At last, the Rolex Submariner 116610LN replica is equipped with a Super Clone 3135 automatic movement, which has a fully decorated plates an rotor like genuine Rolex 3135 Caliber. The replica could also be equipped with an Asian ETA 2836, if you like a genuine Swiss ETA, it needs to be custom made, also the price will be higher.

Replica Rolex Submariner 116610LN Hour Markers

Movement: Asian Super Clone 3135 Automatic, 28800BPH, Modified to Look of Genuine Rolex 3135 Caliber
Case: 40mm*13mm, Solid 904L Stainless Steel
Bezel: Black Ceramic, Uni-directional Rotating
Crystal: Sapphire with Tiny Crown at 6:00
Dial: Black with Super Blue Lume on Markers and Hands
Bracelet: Solid 904L Stainless Steel with Deployant Clasp
Water Resistant: 50m

Replica Rolex Submariner 116610LN Case Back

Replica Rolex Submariner 116610LN 904L Steel Bracelet

Replica Rolex Submariner 116610LN Clasp

Replica Rolex Submariner 116610LN Clasp Engravings

Replica Rolex Submariner 116610LN Wrist Shot

Replica Rolex Submariner Collection

August 29, 2018

AR Factory Replica Rolex DEEPSEA Sea-Dweller D-Blue 116660 with 904L Steel Case Super Clone 3135 Movement

Replica Rolex DEEPSEA Sea-Dweller D-Blue

Whether in genuine watch industry or replica watch field, Rolex has always been the most popular brand, it has several product lines that are designed for people with different purpose. Once Rolex unveiled new watches in BaselWorld each year, then these new watches will be soon replicated by a lot of factories in our market. The watch here shown is a replica made by AR factory, it is a 100% perfect clone of Rolex DEEPSEA Sea-Dweller D-Blue 116660. Several years ago, two main factories made this Rolex DEEPSEA Sea-Dweller D-Bleu replica, they are Noob and BP factories, however, their quality is not as good as this one made by AR factory. Because this time AR used the same case material as genuine watch, that is 904L stainless steel, which was never used by replica Rolex watches before. AR is the first factory that made their Rolex replicas with 904L stainless steel, this is a pioneering work.

AR Replica Rolex Sea-Dweller DEEPSEA

AR is a factory that is in the charge of J12, which is a bigger and more famous manufacturer in watch market. AR mainly produced the best replicas of Rolex Submariner, Sea-Dweller Deepsea, Yacht-Master, Daytona and Datejust, not only these Rolex replicas use the same 904L stainless steel as genuine, but also keep the exquisite workmanship of JF replicas. Because the quality control on case finish and dial details is very strict, so JF only released limited quantity of pieces every time, which is less than 100 pieces, so you need to pre-order.

Replica Rolex DEEPSEA Sea-Dweller 116660

The case is 43mm in diameter, 17.5mm thick, the crystal thickness is up to 5.5mm. Made with one piece of 904L stainless steel, the watch feels heavy, very suitable for people with thick wrist. 904L steel has a lot of advanced features and it is more corrosion resistant than 316L. The watch case has a very delicate brushing finish, the bezel engravings are closer to Platinum tone of genuine watch. The lume pearl on the inverted triangle looks more plump and smooth. Like genuine 116660, the replica also uses a screw-down crown, which has a Rolex Crown Logo with three dots below, inside the crown tube, there is sealed gasket to guarantee better water resistance. The satin finish on the case back feels very textured.

Replica Rolex DEEPSEA D-Blue Dial

D-Blue dial is also one big feature of this replica, the dial is faded from blue to black. Both hour markers and hands are filled with luminous material, the lume color on bezel pearl and dial is the same, which is blue. Date window at 3 o’clock has black date font in white background, which is easy to read. Besides, the date font is centered, it also has the same thickness as that on genuine watch. Inner bezel has black engravings, which include “ORIGINAL GAS ESCAPE VALVE” and “RING LOCK SYSTEM”.

DEEPSEA

DEEPSEA D-Blue Dial Printings

In the heart, the replica has an engine of Super Clone 3135 movement, which is modified from a genuine Chinese automatic movement. The clone 3135 can beat 28800 times per hour, it has decorated platinum plated rotor and plates. AR also offers an Asian ETA 2824 movement option for this replica watch, but not genuine Swiss ETA 2824. Only BP factory offers a genuine Swiss ETA movement in their Rolex replicas.

Replica Rolex DEEPSEA D-Blue Crown

Replica Rolex DEEPSEA D-Blue Case

Movement: Asian Super Clone 3135 Automatic, 28800BPH, Decorated Plates and Rotor to Genuine Rolex 3135 Caliber
Case: 43mm*17.5mm, 904L Stainless Steel
Bezel: Uni-directional Rotating Black Ceramic Bezel, Anti-Clockwise
Crystal: Sapphire with Tiny Crown at 6:00
Dial: D-Blue with Superlume Blue on Markers and Hands
Bracelet: Solid 904L Stainless Steel with Deployant Clasp
Water Resistant: 50m

Rolex 116660 Crown

Rolex 116660 Escape Valve

Rolex 116660 Case Back

Rolex DEEPSEA 116660 Case Back Engravings

Rolex 116660 Bracelet

Rolex 116660 Clasp Engravings

Rolex 116660 Clasp

Replica Rolex DEEPSEA 116660 Wrist Shot

August 28, 2018

MK Factory Replica Tag Heuer Aquaracer Calibre 5 WAY201B.BA0927 Blue Watch with Ceramic Bezel

Replica Tag Heuer Aquaracer

Tag Heuer is a great Swiss watch brand, they made a lot of amazing watches that have been well known all over the world, especially their chronograph watches, which have created a lot of records in watch industry. Like other Swiss watch brands, Tag Heuer also has dress watches, sports chronograph watches and diver’s watches. Chronograph watches are their most iconic models, but Tag Heuer also has a famous diver’s watch series, that’s Aquaracer, which has a compact design. Today, this post will be about a replica Tag Heuer Aquaracer watch, which is made by MK factory, this watch manufacturer got its MK name because they made good quality IWC Mark series replica watches before, now this replica is the latest Tag Heuer Aquaracer watch MK factory published in 2018, genuine watch has a reference number WAY201B.BA0927. The following article discusses every part of the replica watch, hope you like it after reading this review.

Replica Tag Heuer Aquaracer Calibre 5 WAY201B.BA0927

The case is 43mm in diameter, compared to previous 41mm, it is closer to “big watch”. Robust case is made of solid 316L stainless steel and brushed, the ocean blue bezel is made with real ceramic, which is uni-directional rotating and has 12 sides with 6 studs. The ceramic bezel has been engraved with silver numerals in correct depth. The bezel pearl at 12 o’clock is filled with luminous material. Screw-down case back is brushed and engraved with a diver’s helmet. For a diving watch, this helmet engraving makes the watch look more professional.

Replica Tag Heuer Aquaracer 300m

Like the blue bezel, the replica also uses blue color on the dial and it has Aquaracer’s iconic horizontal stripes. The replica has a big difference on the dial with other diver’s watches. Hour markers at 6, 9 and 12 are divided into two parts, each part has different lume color, so are hour and minute hands. The second hand has an orange tip that is also filled with Swiss lume. Whatever, the dial has two types of lume color, blue and green. A date window is positioned at 3 o’clock, it has a black date font in white background.

Replica Tag Heuer Aquaracer Crown

The bracelet is made of 316L stainless steel, which is fully brushed. Stainless steel bracelet fits the watch very well, but you can also choose one pair of rubber band for this replica watch. With a steel bracelet, the watch feels heavy, but it gives you a higher quality texture feeling. The replica is equipped with an Asian ETA 2824 automatic movement, which is considered to be the most reliable movement used in replica watches. Its accuracy and stability will exceed your expectation.

Replica Tag Heuer Aquaracer case

Replica Tag Heuer Aquaracer Case Back

Tag Heuer Aquaracer Clasp

Replica Tag Heuer Aquaracer Wrist Shot

August 27, 2018

XF Factory Replica Zenith Type 20 Pilot Extra Special Watch – The Roc Bird in The Sky

Replica Zenith Type 20 Pilot Extra Special

Pilot watch is another type of military watch, although not as popular as those watches made for the navy, they have some stunning features and are also known as the pioneer of military watch. Bell Ross is a very famous pilot watch brand, IWC also developed their Pilot series and unveiled a lot of classic watches, both have fine watches and also good replicas, I love them. The Pilot watch I am going to introduce today is from Zenith, which is not a very famous brand I think, but this Type 20 Pilot Extra Special catches my attention, it has a big case, a big crown and extremely exaggerated arabic numeral markers. While the watch discussed below is a replica made by XF, which is also known as V6 or KW, the replica watch is completely made according to the requirement of our watch fans, because a lot of people in some watch forums discussed this watch before and asked when there will be a factory willing to replicate this Zenith Type 20 Pilot Extra Special, after half of one year, the replica was produced out by V6 factory.

Replica Zenith Pilot Watch

The Zenith Pilot replica watch has a big case, actually the case diameter is not very large, only in 45mm. It is exactly the large onion-shaped crown that makes the 45mm case look bigger. And the big crown is very convenient for you to operate, easy to rotate. Case is brushed, on the left side, there are black engravings, on this replica watch, they are “HB – 0710”, I do not know the meaning of these engravings. Four lugs are fixed on the case by screws, lugs are curved so making the case fit your wrist perfectly. Case back has a unqiue embossment, the pattern is a airplane with a flag. On the polished edge of the back, there are correct engravings like genuine Zenith Pilot watch.

XF Replica Zenith Pilot Watch

Black dial is the brightest spot of the replica. Big Arabic hour markers in white are luminous. The cathedral hands are also a big feature. Both hands and hour markers are filled with Swiss lume, which will offer a strong green light in dark condition. Five-star Zenith logo in stainless steel is three-dimensional. The printings of “EXTRA SPECIAL” and 60-minute markers are in brown color, which exactly echo with the brown leather strap.

Zenith Pilot Black Dial

The replica watch is equipped with one pair of brown leather straps. Its distressed look has a similar style with Panerai’s ASSO leather band. The brushed buckle, which has a three-dimensional five-star logo, looks like Panerai’s Pre-V style buckle. Do you agree? before make a purchase, please read its specification below.

Movement: Asian ETA 2824-2 Automatic, Modified Plates and Rotor to Genuine Zenith Caliber
Case: 45mm*15mm, 316L Stainless Steel
Crystal: Sapphire with AR Coating
Dial: Black with Super Swiss Lume
Band: Brown Leather Strap with Tang Buckle
Water Resistant: 50m

Zenith Pilot Left Case Side

Zenith Pilot Onion Crown

Zenith Pilot Case Back

Zenith Pilot Buckle

Zenith Pilot Wrist Shot

August 26, 2018

Replica U-Boat U-51 Chimera Left-Handed Watch – Tough Military Quality

Replica U-Boat U-51 Chimera

Big watch is the trend and big military watch is loved by most fans because their brand legendary stories behind. Both Panerai and U-Boat are famous military watch brands that were specially supplied for the Italian Navy. One common feature between the two brands is their big and strong case. They also have left-handed watches, which are also called “destro” in Italian. For example, this U-Boat U-51 Chimera replica is a left-handed watch, it inherits all necessary features that make it become a robust military watch, such as big solid case, strong dial lume, high readability and excellent water resistance. There are few top quality replica U-Boat watches in our market, but this one is the best of the few.

Replica U-Boat U-51 Watch

Replica U-Boat Chimera

The replica has a big case that is measured to be 46mm in diameter, which does not include the crown. The case is also very thick, almost 17mm. Crown and two pushers are positioned on the left side of the case, the crown has a big protecting cap, when you want to adjust hands or date, you need to open the cap first. I only see such crown design on U-Boat. This gives the crown a full protection and guarantees a better water resistance. When press the button at 8, chronograph will be started or stopped, when you push the button at 10, the chronograph will be reset.

Replica U-Boat Black Dial

White hour markers on black dial are clearly readable, there are luminous material applied on markers and hands, but on this replica, the lume light on the hour markers is green, while the lume light emiting from hands is blue. There are three subdials, the subdial with small green hand at 3 o’clock is displaying seconds, the subdial with white scales at 6 o’clock is 30-minute chronograph counter, on top, the small dial at 12 o’clock is for hour chronograph. Date window, which is positioned at 9 o’clock, features white font in black background. Overall, reading from the dial, you will know this replica has a fully functional chronograph.

Replica U-Boat Crown

Replica U-Boat Case Engravings

See-through crystal back shows the engine, which is an Asian Valjoux 7750 chronograph, means the factory used a Chinese chronograph as a basic movement and made some decoration. You can see the skeletonized auto rotor and beautiful Geneva Stripes polishing on movement plates, these modification was done by skilled watch master. At last, let me show you the specification of the replica watch.

Replica U-Boat U-51 Chimera Chronograph Movement

Movement: Asian Clone Valjoux 7750 Chronograph, 28800BPH, Hours, Minutes, Small Seconds, Date, Chronograph
Case: 46mm*17mm, Solid 316L Stainless Steel
Crystal: Sapphire with AR Coating
Dial: Black with Lume Hour Markers and Hands
Bracelet: Black Leather Strap
Water Resistant: 50m

Replica U-Boat Black Leather Strap

U-Boat Steel Buckle

August 22, 2018

V6 Factory Replica SevenFriday Racer P3B/01 with Miyota 82S7 Movement

Replica SevenFriday Racer P3B 01

SevenFriday became hot about 3 years ago due to its unique dial design. Now a large number of people are willing to choose those watches that look strange with bold design, SevenFriday is very popular among the young. It developed a few series that could be distinguished from each other by their dial. Now, the watch I am writing about is a replica of SevenFriday Racer P3B/01, it is made by V6, which is a factory that mainly produced Panerai replicas before, but now their replica watch business covers every Swiss brand. Because SevenFriday has a complicated dial, it is hard for the factory to make the replica to be 100% perfect. Look at this SevenFriday Racer P3B/01 replica carefully, its dial has some difference with genuine, but also could be 98% close to original watch.

Replica SevenFriday Racer

The case is made of 316L stainless steel and has black DLC coating on surface, it has a diameter of 47mm. Black rubber is wrapped around to prevent case from scratches. Check case side, there are horizontal patterns and “SEVENFRIDAY”. Crown is positioned on the right side and protected by two rubber guards, the replica watch also has a good water resistance exactly because the crown system has the same construction as genuine. You can read a lot about SevenFriday on the solid case back, a world map on the circle in matt finish. The map show that the design & concept of SevenFriday come from Switzerland, it is produced and assembled in China, the movement inside is from Japan. Because it is completely made in China, I think this is the main reason why genuine SevenFriday is sold at much cheaper than other Swiss watches.

V6 Replica SevenFriday Racer P3B

Dial is multi-tier. You can seven see the working balance wheel from skeletonized plate. It is very easy to read time from the dial, there is a small dial marked with a red triangle at 4:30, it rotates and acts as the seconds hand role. The most upper round plate with a black hand is displaying minutes. The red hand at bottom with a white lume tip shows current hours. The rotating subdial at 9 o’clock is showing 24-hour GMT, is it true? I do not know, maybe it is a GMT function.

Replica SevenFriday Racer Multi-Tier Dial

Like genuine watch, this SevenFriday replica watch is equipped with a Japanese Miyota 82S7 automatic movement. No difference between the replica and genuine, the movement is real and directly imported from Japan. At last, the black leather band is made of premium calfskin leather, with padded insert and stitching, the strap looks good on the case and perfectly matches the whole style of the watch.

SevenFriday Crown

SEVENFRIDAY

SevenFriday Racer P3B Case Back

SevenFriday DLC Pin Buckle

Replica SevenFriday Racer Wrist Shot

August 21, 2018

J12 Factory Replica Audemars Piguet Royal Oak 15400 Clone 3120 Movement Blue Dial with Stainless Steel Bracelet

J12 Factory Replica Audemars Piguet Royal Oak 15400

Audemars Piguet Royal Oak 15400 is very popular among our watch fans, it has several models in different dial colors, such as black, white, grey and blue. The watch could also be equipped with stainless steel bracelet or black rubber strap. As a basic sports series of Audemars Piguet, Royal Oak is loved due to its simple design but with practical functions. 15400 is the most favorite of many people because of its classic look. Although it is a sports model, the watch is more used in a lot of formal occasions, it perfectly matches with your casual or business suits. Today, I will show you one replica Audemars Piguet Royal Oak 15400, it is made by J12, which is a great manufacturer who has earned a lot of reputation for making the best Audemars Piguet replicas. This Audemars Piguet Royal Oak 15400 replica is fully made of solid 316L stainless steel, which looks like a big tough tank. Wearing such a stainless steel Audemars Piguet watch will show your mens charm to the maximum.

JF Replica Audemars Piguet 15400

The case is newly produced accordin to the case profile of genuine watch, the factory abandoned the case that was used on previous versions of 15400, this one was replicated independently. Now the case on this V3 replica Audemars Piguet 15400 is completely the same as genuine, whether in diameter or thickness. Octagonal bezel is most able to reflect the case finish level, its surface is brushed and each side is polished, every corner is well polished so that there will be no metal burrs. When you touch the bezel with your hands, it feels very smooth. To get a better water resistance, there is a waterproof washer between the bezel and case, so that they can fit together tightly. Case and lugs are forged into one piece, it looks like the lugs are extended parts of the case. Check the “AP” engraving on crown, it is matt finished and has a correct depth. Case back is fixed by one-word screws, with one see-through crystal on the center.

Audemars Piguet Royal Oak Blue Dial

J12 is the first factory that installed clone 3120 automatic movement in their Audemars Piguet Royal Oak replica watches. This 15400 is also equipped with a clone AP 3120 movement that has been improved by J12 for several times. The clone 3120 is actually based on a Japanese Miyota 9015, J12 chose this Japanese movement to modify because it has the same stability and accuracy as genuine Swiss ETA movement. After the release of clone 3120 and being installed in their AP replicas, the test result is that the movement has a very low repairing rate. I love the crystal back, it lets me to appreciate the beauty of the movement closely.

Audemars Piguet 15400 Steel Case

Dial is blue and it also has grey, white and black color options. Blue and black are my favorites. Stick hour markers have a very similar shape to hour and minute hands, they all have silver edge and are applied superlumed material on the center. Central seconds hand is slender and works smoothly, without jumping seconds. The classic tapisserie dial patterns on this replica could not be 100% the same as genuine, but you can not tell the difference if you do not have a genuine watch in hand. Date window is small and at 3 o’clock, it features a blue edge and white font in blue background.

Audemars Piguet Clone 3120

There are a lot of Audemars Piguet replica watches in good quality, but if you want to buy your first replica and have an interest in Audemars Piguet, then 15400 could be your entry-level replica watch. Royal Oak 15400 is currently the best replica Audemars Piguet and sold at a much cheaper price than other Audemars Piguet Chronograph watches, you also do not need to worry of sending it back for repairing because the replica itself has a high stability, if you can do a regular care on the watch, it could run accurately for about five years.

Audemars Piguet Rose Gold Rotor

Audemars Piguet 15400 Clasp

Audemars Piguet Royal Oak 15400 Blue Replica

August 20, 2018

JJ Factory Replica Hublot Classic Fusion 511.NX.1170.LR Black Titanium Watch with HUB1112 Movement

Replica Hublot Classic Fusion Black

Hublot is really hot in recent years, it has won a lot of praise due to its unique shape and fusion watch-making technology. The design concept of Hublot is fusion, which is combining various materials into the design of one watch. When I see football, I will think of one watch brand, that is Hublot, yes, this Swiss watch company has made a great contribution to the development of football, they also designed limited edition watches for many famous football players, including Maradona. Now, I will introduce one replica Hublot Classic Fusion in this post, the watch is made by JJ, which is a new factory and just started to make their reputation due to the production of this replica Hublot watch. Actually the replica has several dial color options, which include black, white, grey, blue, the one I am going to review has a black dial. If you are interested in this replica Hublot and need a different dial color, please contact me through email, then I can send you QC photos.

Replica Hublot Classic Fusion 511.NX.1170.LR

Classic Fusion looks very simple and has a thinner case than other Hublot series. The case of this replica Hublot is 38mm in diameter and measured to be 9.5mm thick, case size is the same as genuine model. The case is made of solid Titanium and has a superior finishing, lugs are naturally forged into one-piece case, they are are polished on sides and every corner. Round bezel has a top-level polishing work, it is fixed by six H-shaped screws and fits the case perfectly. The crown has a satin-finished Hublot logo on polished face, which looks very delicate. Case back is brushed, you can see the word-engraving of “TITANIUM” on the back.

Replica Hublot Classic Fusion Titanium Watch

Dial is black with white lettering. The dial is easily replicated and could achieve a high clone level because it does not have a complicated design. Silver bar-shaped hour markers are raised from the dial and give you a perfect 3D visual effect. Central seconds hand is long and slender, it sweeps the dial smoothly with a Hublot Logo at the end. I love the dial design of this Hublot Classic Fusion black watch, it shows the elegance of the watch to the maximum. Date window is positioned at 3 o’clock, featuring white date font in black background, which is easily found just at a glance. There is not too much things needed to talk on the dial, it is too perfect.

Hublot Stainless Steel Case

The replica is equipped with an Asian clone HUB1112 automatic movement, which is based on Asian ETA 2892. The factory decorated the base movement to look of genuine Hublot HUB1112, so if you check the movement on the replica, it is hard to find the difference. The auto rotor is finished in top quality, black “HUBLOT” engraving is skeletonized, arc-shaped edge has vertically polished patterns like genuine. Golden balance wheel has a shock absorber on top, the regulator could be used for inaccuracy adjustment. On the plate of the movement, there are a few silver screws fixed to make the movement work more stable. Any way, this clone movement not only has a close outlook with genuine HUB1112, but can also run accurately and stably.

HUB1112

Black band is made with two types of materials, the outside uses genuine leather, while the back side that touches your skin is black rubber. I do not know why Hublot adopts such design on this band, but it is really comfortable to wear, especially when you are swimming.

The above is the final review of Hublot Classic Fusion 511.NX.1170.LR replica, if you are interested in purchasing one after reading, please send me a message, our contact email is jasonwatch88@gmail.com.

Hublot Classic Fusion Black Leather Strap

JJ Factory Replica Hublot Classic Fusion

August 19, 2018

Replica Roger Dubuis RDDBEX0398 Knights of The Round Table I Rose Gold Watch Review

Replica Roger Dubuis Knights of The Round Table

Today, I want to introduce a very special watch here, it is from the great Excalibur series of Roger Dubuis. The Knights of The Round Table, which was unveiled by Roger Dubuis at SIHH 2013, has a reference number RDDBEX1398. The watch was published a few years ago but there was only a replica of it at the end of 2017, it is too long, I think the main reason is that no manufacturers could be able to replicate it well. Now finally a factory had the courage to replicate the Roger Dubuis Kings of The Round Table, and the quality is fine. Check its dial, you will find the watch is hard to be replicated, the factory, which does not have a name, spent a lot of time and efforts to make the replica to be closer to genuine, and you can see it from those photos, is it good? I think it is not bad, moderate quality and could be accepted, but the price is a little expensive.

Replica Roger Dubuis RDDBEX0398

The replica has a traditional Excalibur case, which is 45mm in diameter and has a fluted bezel. The case is made of solid 316L stainless steel and has a thick rose gold coating. The crown guards are fixed to the case by screws, rose gold crown is big and features the unique logo in satin-finish face. Triple lugs are naturally extended from the case. On case back, there are full of engravings, which are supposed to be the solemn oath of the Knights of the Round Table, there is also a lacquered coat of arms engraved in the center.

Replica Roger Dubuis Rose Gold Watch

The dial is the most unique part. It is colorful and uses enamel material. There are 12 three-dimensional “knights” stationed at each hour marker, which replace each of the traditional marker. The dial design is inspired by the Arthurian Round Table. The 12 sculptural knights are also in rose gold tone, each is carved by hand, look at them carefully, you will find their fine detail and each of them is different. The watch master must spend a lot of time to carve, so you know why they are selling the replica at a high price.

Replica Roger Dubuis Enamel Dial

The bracelet is made of genuine crocodile leather that has embossed patterns. Black leather strap forms a high contrast with the rose gold case, but it is perfectly in line with the rose gold tone, the black leather band makes the replica watch look more elegant. There is a deployant clasp in white stainless steel on the band, I think it will be better if Roger Dubuis uses a rose gold clasp. The biggest difference between genuine and the replica lies in the movement, genuine watch uses Roger Dubuis in-house movement, while the replica Roger Dubuis RDDBEX0398 is equipped with a manual winding tourbillon movement of famous Sea-gull watch factory.

Roger Dubuis Knights of the Round Table Crown

The stocks are limited, if you want to buy, please contact us immediately.

Roger Dubuis Knights of the Round Table Rose Gold Case

Roger Dubuis Knights Bezel Flutes

Replica Roger Dubuis Knights Marker

Roger Dubuis Knights Hour Markers

Roger Dubuis Knights Case Back

Roger Dubuis Knights Back Engravings

Roger Dubuis Lacquered Coat

Roger Dubuis Knights Rose Gold Clasp

Roger Dubuis Knights of the Round Table Wrist Shot

August 17, 2018

GF Upgraded V3 Version of Replica Breitling Avenger BlackBird Titanium Watch with Ocean Racer Strap

Replica Breitling Avenger BlackBird

A man usually needs more than one watch, three pieces are necessary I think. Usually for formal occasions, sports activities and diving. Today the watch I wanna discuss is exactly made for divers, with a cool black look that catches the attention of many watch fans. The watch is a replica of GF factory, it is the upgraded V3 version published by the factory in recent days. There are several places that have been improved on the basis of previous V2 version, after reading the following article, you will know whether it is worth to buy or not. GF is a new factory in our market, but it has manufactured a lot of amazing replica watches since the beginning of 2018, but Breitling is the main brand they are replicating, and I believe this replica Breitling Avenger BlackBird GF produced out is in superior quality that has exceeded the expectations of many people.

Replica Breitling Avenger BlackBird From GF

The case is made of solid Titanium and DLC processed, it is measured to be 44mm in diameter, the blackened case is 1:1 replicated whether you measure it from any angle, it has a great arc line when you check the case side, especially the triple lugs. Bezel is uni-directional rotating and has correct engravings like genuine. The pawl at 12 o’clock has a pearl that is filled with white luminescence. The bezel looks very tough, but with fine details. Case back has a lot of engravings, most of them have special meaning which I do not know. The circle on the center has a satin finish with BREITLING and LOGO on.

Replica Breitling Avenger BlackBird Titanium Watch

Black dial has all details that make the watch necessary to be a diver’s watch. The bright red end of seconds hand and green lume make the watch highly readable even in the dark. White minutes scales also form a sharp contrast with the black dial. On the replica dial, the silver Breitling logo is in three-dimensional, which looks vivid. Date window at 3 o’clock features a red frame, the date font is white in black background, which gives the wearer a good readability.

Replica Breitling Avenger BlackBird Black Dial

The Breitling BlackBird replica watch is equipped with an Asian ETA 2824-2 automatic movement, which beats 28800 times per hour and has 25 jewels. Asian ETA 2824 is the movement that is most widly used in replica watches, it was installed in thousands of replica watches and tested by them, finally got a high reputation from these tests. A black rubber band is on the replica, the strap is ocean racer style with holes, I do not like this style, if you like it with a black nylon strap, I can send it for free.

Breitling Avenger BlackBird Sapphire Crystal

Breitling Avenger BlackBird Dial Printings

The following is specification of the watch.

Movement: Asian ETA 2824-2 Automatic, Nickel Plated Movement Plates and Rotor, 25 Jeweled, 28800BPH, with Hack Feature
Case: 44mm*13mm, DLC on Solid Titanium, Uni-Directional Rotating Diver Bezel
Crystal: Sapphire with AR Coating
Dial: Black with Green Superlume on Markers and Hands
Bracelet: Black Ocean Racer Rubber Strap with Tang Buckle
Water Resistant: 50m

Breitling Avenger BlackBird Titanium Case

Breitling BlackBird Diver Bezel

Breitling Avenger BlackBird Case Back

Breitling Tang Buckle

Breitling Avenger BlackBird Wrist Shot