R8 Factory 1:1 Ultimate Replica Audemars Piguet Royal Oak Tourbillon 26510 with Blue Dial

Posted on April 25, 2019 by Jason

I never heard off R8 factory before, maybe it is a small factory that is not as popular as Noob, BP and J12. However, R8 is one of the few factories that make tourbillon replica watches in our market. Sometimes it is better to buy a tourbillon watch, not only because of its high accuracy, but also the tourbillon device has fewer repairing rate. About five years ago, there are few tourbillon replica watches because of limited watch-making technology, nowadays, most watch fans have a higher requirement in replica watches, they are more willing to buy replica watches with advanced specification, so a lot of factories started to improve their watch-making technology and use tourbillon device, R8 is one of them. This Royal Oak Tourbillon watch is a novelty presented by Audemars Piguet several years ago, in our market, it has been replicated by more than three factories. Here I will introduce the one by R8F.

Replica Audemars Piguet Royal Oak Tourbillon 26510

Replica Audemars Piguet Royal Oak Tourbillon Watch

Powered by a tourbillon movement, the replica watch uses a real tourbillon movement made by Sea-Gull, which is the most famous watch company in China and also has a good reputation in the world’s watch industry. The movement is not modified by the factory, so it is the original Seagull tourbillon, which is very stable, I mean this one is the most high end tourbillon replica watch in the entire market. By the way, this tourbillon movement is hand winding. Check it through the crystal back, the movement plate has a nice decoration.

Audemars Piguet Royal Oak Tourbillon Device

Reinforced case is measured to be 41mm in diameter, it is brushed featuring an octagonal bezel with polished edge. Check the case from side, it does not look thick, the case is only 12.4mm in thickness. Like genuine watch, both bezel and case back are screwed down into the middle case, the polygonal crown on the right case is very easy for you to rotate to wind and adjust hands.

The bracelet is crafted from solid 316L stainless steel, it is brushed and slender, so it won’t feel very heavy when wearing the watch on hand. The clasp id deployant, it has the same structure as genuine watch, you just need a light press to unfold it. It is also very easy for you to remove this stainless steel bracelet and change another pair of leather band. Finally, please check the basic specification of the replica.

Audemars Piguet 26510 Sea-Gull Tourbillon Hand Winding

Movement: Real Seagull Tourbillon, Hand Winding
Case: 316L Stainless Steel, 41mm*12.4mm
Bezel:Brushed, with Polished Screws
Crystal: Sapphire with AR Coating
Dial: Blue Checkered Dial, Working Tourbillon Device Shown at 6 o’clock, Balance Bridge Fixed on The Dial
Bracelet: Solid 316L Stainless Steel, Deployant Clasp with Correct Structure and Engravings
Water Resistant: 30m

Audemars Piguet Royal Oak Tourbillon Wrist Shot

TWA Factory Replica Audemars Piguet Royal Oak Dual Time 26120 with Clone 2329 Movement

Posted on April 22, 2019 by Jason

There are a lot of top quality replica Audemars Piguet watches in our market, some people always asked me which one is the best, actually every replica watch has their advantages and disadvantages, they are not perfect. However, in my mind, there are three pieces which I think are the best, if you want buy one replica Audemars Piguet watch, you can consider one of them. They are Royal Oak 15400, Royal Oak Diver 15703 and Royal Oak 15202. These three watches are all made by J12 factory. Today, I want to show you a very unique Audemars Piguet watch coming from TWA factory. The watch has several practical functions such as date, second-time zone, power reserve, it is very convenient for the user who usually travels around the world.

Replica Audemars Piguet Royal Oak Dual Time

Replica Audemars Piguet 26120 Black Dial

The Audemars Piguet Dual Time 26120 replica maintains the distinctive case shape of Royal Oak with octagonal bezel. The case is brushed, it is measured to be 41mm in diameter. The octagonal bezel has a polished edge with eight screws decorated on the face. The whole case uses the same construction as genuine watch, between the middle case and bezel, there is black rubber gasket, which is one part of the waterproofing system. Case back is solid stainless steel, it has “Royal Oak” in bright silver tone, in the sandblasted center background.

Audemars Piguet 26120 Stainless Steel Case

The most eye-catching place of the replica watch lies in its dial, which is black. Royal Oak’s classic checkered dial has a fan-shaped power indicator between 8 o’clock and 11 o’clock. The date is displayed on a subdial positioned at 2 o’clock. At 6 o’clock, it is the second time zone display, on the left side, there is a day and night indicator with a small red index. Anyway, the replica has all functions which you can find on its genuine watch. Besides, the dial has increased amount of Swiss lume material applied on stick hour markers and hands.

This watch is a moderate quality replica from TWA factory, maybe its case and bracelet finish are not as good as that of AP replicas from J12 factory, but they are already good enough, besides, the replica is sold at much cheaper price than those AP made by J12. I do not know whether J12 factory will make this replica or not, maybe we still need to wait for several months.

J12 Factory Replica Audemars Piguet Royal Oak Perpetual Calendar 26574 with Clone 5134 Movement

Posted on April 18, 2019 by Jason

JF Replica Audemars Piguet Royal Oak Watch

Royal Oak is one of the best-selling sports watches in the world. It is highly recognizable due to its octagonal bezel shape. Many of us think that Royal Oak only has some simple models, other complicated models are in Royal Oak Offshore and Jules Audemars series, actually they are wrong. We admit that Royal Oak produces the most simple and popular 15400 watch, but it also has some complicated models like this one I am going to introduce here. It is Royal Oak 26574 with a lot of functions, including date, week, month and moon phase. The watch that has so many functions is hard to be cloned, but J12 factory completed this hard work and brought this novelty to us.

Replica Audemars Piguet Royal Oak Perpetual Calendar

26574 is a Royal Oak watch that is fully made of stainless steel. The case is 41mm in diameter, its thickness is no more than 13mm. The entire case is brushed, there are eight polished screws in brushed bezel, to ensure a good water resistance, J12 factory refers to the case waterproofing system of genuine watch, so whether the case or crown construction, they tried their best effort to make it 1:1 original. On the left case, there is one button, there are two buttons up and below the crown on the right case side, I did not operate these three buttons, so I do not know which function will be adjusted when you push one of them.

The dial is textured blue, there are four small dials with each displaying different function. Each subdial has Guilloche decoration. The subdial at 3 o’clock with a red digit “31” is displaying current date. The moon phase is displayed at 6 o’clock. Week is displayed on the subdial at 9 o’clock. There are two subdials at 12 o’clock, the outer big one is for month display, I do not know the function of the one inlaid. Hour markers, hour and minute hands have Super-LumiNova coating applied.

The movement, which you can see from crystal back, is highly decorated. The main base plate has beautiful Geneva Stripes, we also call these fish scales. Auto rotor is skeletonized and in golden tone, this is the first time for J12 factory to clone the genuine 5134 movement of Audemars Piguet. We expect more improvement could be made by J12 on thie clone 5134.

This Audemars Piguet replica watch is very convenient, you can know exact month, date and week just by a glance, without the need to taking out your mobile phone.

J12 Factory 1:1 Ultimate Replica Audemars Piguet Royal Oak Diver 15707 Ceramic Watch with Clone 3120

Posted on March 5, 2019 by Jason

Nowadays in watch industry, Audemars Piguet has beaten many Swiss watch brands such as Breitling, Bell Ross and Tag Heuer, it has become a flagship brand among all Swiss sports watches. The big case and octagonal bezel are two big features of Audemars Piguet, you can notice this big watch at a glance. Royal Oak is the most popular sports series of Audemars Piguet, it is also very famous among all sports watches. The Royal Oak Diver is very new to us, it was just a new series published by Audemars Piguet several years ago. Now Royal Oak Diver has a lot of popular models such as 15703, 15710 and 15707. These models are also hot targets in replica watch industry, they have been replicated by a lot of factories, among them, I think J12 makes the best replica Audemars Piguet Diver watches. First, the case finish which J12 factory does in all Audemars Piguet replica watches is the best, this has been proven by the professionals in watch forums. Seconds, J12 is the factory that firstly developed Asia 3120 movement and installed their Audemars Piguet, now this movement researched two years ago has been improved by J12 for several times, so, the accuracy and stability are much better now. Third, about Audemars Piguet Diver watches, especially 15703 and 15707, J12 factory has upgraded their details for more than three times, now, this final edition is an ultimate 1:1 replica, if you have read my previous post about the Diver 15703, you will know how good the JF Audemars RO Diver is.

Replica Audemars Piguet Royal Oak Diver Orange

JF Factory Replica Audemars Piguet Royal Oak Diver

Replica Audemars Piguet 15707 Black Checkered Dial

The 42mm case plus its octagonal bezel looks big, however, the case is not thick, it is only 12mm. The entire case and bezel are made of black ceramic, the brushing finish on the case is the same as that of genuine watch. There are eight stainless steel screws fixed on the bezel, look at care carefully, its edge is finely processed, which feels very smooth. The whole case is full of angularity and mechanical beauty, especially its case side. The crown has delicate “AP” engraving in sandblasted finish.

Black checkered dial has every detail that is made very close to genuine dial. The black dial has a very good readability, not only because of the Swiss lume material applied on hour markers hands, but also the orange color on inner bezel rehaut and minute hand increases readability. The lume on the dial is very strong and long lasting. Central second hand is very unique, the orange lume dot and tip are very attractive.

Crystal case back shows the movement clearly. Now this Super Clone 3120 is the third generation of 3120 from J12 factory. The decoration on the golden auto rotor is upgraded, the sculpture on the rotor is 1:1 cloned from genuine AP 3120. While on the movement plates, there are golden engravings, the jewels have a correct tone. The mechanism of this Super Clone 3120 is genuine Miyota 9015, so the stability of the movement could be guaranteed.

Replica Audemars Piguet 15707 Crystal Back

Now, the review is done, let’s check the full specification of the replica watch.

Movement: Super Clone 3120 Based on Japanese Miyota 9015 Automatic, Platinum Plated Movement Plates and Decorated Auto Rotor, Currently The Best Clone 3120
Case: 42mm*12mm, Black Ceramic
Bezel: Imported Balck Ceramic Material
Crystal: Sapphire with Colorless AR Coating
Dial: Black Checkered Dial with Super Green Lume on Markers and Hands
Bracelet: Black Rubber Strap with Tang Buckle
Water Resistant: 50m

Replica Audemars Piguet 15707 Clone 3120

XF V2 Edition Replica Audemars Piguet Diver 15706 Forged Carbon Watch with Super Clone 3120 Movement

Posted on October 10, 2018 by Jason

Audemars Piguet Royal Oak Diver Replica

XF Audemars Piguet 15706 Diver

XF Audemars Piguet Diver Replica

Audemars Piguet Royal Oak is the most masculine watch, it has a case with obvious edges and clear lines, octagonal bezel is fixed by eight screws, each detail is very tempting for me. If you had experience in buying replica watches, you will know that J12 factory makes the best replica Audemars Piguet watches, but after the release of this Audemars Piguet Diver 15706 replica by XF, I changed my opinion, the factory that could be able to challenge J12’s dominance appeared, that is XF. After reading my review, you will know my saying is right. XF is not a new factory, actually it has been very familiar to us, it was previous KW or V6 factory. I do not know why they changed their factory name in 2018. Now, let’s back to this replica watch, it is the latest V2 edition of Audemars Piguet Diver 15706, every detail has reached to be a perfect replicating level.

Audemars Piguet 15706 Black Dial

AP Diver Checkered Dial

AP 15706 Date

AP 15706 300m AUTOMATIC

The case is completely made of forged carbon, take a closer look at the case, it has special carbon patterns, and the forged carbon case makes this big watch feel light when wearing. Bezel is made of high grade black ceramic, the replica watch has a very high-level case construction, which is the same as genuine watch. Between the case and bezel, there is one gasket made of black rubber to guarantee better water resistance. The surface of the black ceramic bezel is brushed and feels high quality textured. However, the case finish still has not reached to the level of J12 AP replicas. On the solid case back, central relief “Royal Oak Offshore” is polished in sandblasting background.

AP Steel Crown

AP 15706 Ceramic Bezel

Black dial is checkered, there are stick hour markers in white, hour markers and Arabic numerals on the beveled inner bezel are applied Swiss Superlume material. The dial will have a strong green lume light in the dark. Minute hand and the tip of the central second hand are in yellow color, which is in line with the yellow inner diving bezel. The dial has a great finish, date window is positioned at 3 o’clock, white date font is centered in the window and has the same font size and thickness as genuine AP 15706.

AP Royal Oak Offshore Engravings

Royal Oak Offshore on Back

Compared with J12 AP 15706, the biggest advantage of XF replica AP 15706 is that it is equipped with a Swiss ETA 2836 movement. I mean this replica uses a genuine Swiss ETA movement, the factory modified the auto rotor and movement plates so that it looks like AP 3120 Caliber. XF made this clone 3120 movement on basis of a genuine ETA 2836, so the movement will work more accurate and stable. The following are details of the replica. By the way, the factory also offers one pair of XS black and yellow rubber strap for this watch.

AP Engraving on Buckle

Movement: Modified AP 3120 Caliber on Basis of Genuine Swiss ETA 2836-2 Automatic, 28800BPH
Case: 42mm*12mm, Solid Forged Carbon
Bezel: Black Ceramic
Crystal: Sapphire with Colorless AR Coating
Dial: Black with Superlumed Hour Markers and Hands
Bracelet: Black Rubber Strap with Tang Buckle
Water Resistant: 50m

AP 15706 Wrist Shot

AP 15706 Diver Wrist Shot

J12 Factory Replica Audemars Piguet Royal Oak 15400 Clone 3120 Movement Blue Dial with Stainless Steel Bracelet

Posted on August 21, 2018 by Jason

J12 Factory Replica Audemars Piguet Royal Oak 15400

Audemars Piguet Royal Oak 15400 is very popular among our watch fans, it has several models in different dial colors, such as black, white, grey and blue. The watch could also be equipped with stainless steel bracelet or black rubber strap. As a basic sports series of Audemars Piguet, Royal Oak is loved due to its simple design but with practical functions. 15400 is the most favorite of many people because of its classic look. Although it is a sports model, the watch is more used in a lot of formal occasions, it perfectly matches with your casual or business suits. Today, I will show you one replica Audemars Piguet Royal Oak 15400, it is made by J12, which is a great manufacturer who has earned a lot of reputation for making the best Audemars Piguet replicas. This Audemars Piguet Royal Oak 15400 replica is fully made of solid 316L stainless steel, which looks like a big tough tank. Wearing such a stainless steel Audemars Piguet watch will show your mens charm to the maximum.

JF Replica Audemars Piguet 15400

The case is newly produced accordin to the case profile of genuine watch, the factory abandoned the case that was used on previous versions of 15400, this one was replicated independently. Now the case on this V3 replica Audemars Piguet 15400 is completely the same as genuine, whether in diameter or thickness. Octagonal bezel is most able to reflect the case finish level, its surface is brushed and each side is polished, every corner is well polished so that there will be no metal burrs. When you touch the bezel with your hands, it feels very smooth. To get a better water resistance, there is a waterproof washer between the bezel and case, so that they can fit together tightly. Case and lugs are forged into one piece, it looks like the lugs are extended parts of the case. Check the “AP” engraving on crown, it is matt finished and has a correct depth. Case back is fixed by one-word screws, with one see-through crystal on the center.

Audemars Piguet Royal Oak Blue Dial

J12 is the first factory that installed clone 3120 automatic movement in their Audemars Piguet Royal Oak replica watches. This 15400 is also equipped with a clone AP 3120 movement that has been improved by J12 for several times. The clone 3120 is actually based on a Japanese Miyota 9015, J12 chose this Japanese movement to modify because it has the same stability and accuracy as genuine Swiss ETA movement. After the release of clone 3120 and being installed in their AP replicas, the test result is that the movement has a very low repairing rate. I love the crystal back, it lets me to appreciate the beauty of the movement closely.

Audemars Piguet 15400 Steel Case

Dial is blue and it also has grey, white and black color options. Blue and black are my favorites. Stick hour markers have a very similar shape to hour and minute hands, they all have silver edge and are applied superlumed material on the center. Central seconds hand is slender and works smoothly, without jumping seconds. The classic tapisserie dial patterns on this replica could not be 100% the same as genuine, but you can not tell the difference if you do not have a genuine watch in hand. Date window is small and at 3 o’clock, it features a blue edge and white font in blue background.

Audemars Piguet Clone 3120

There are a lot of Audemars Piguet replica watches in good quality, but if you want to buy your first replica and have an interest in Audemars Piguet, then 15400 could be your entry-level replica watch. Royal Oak 15400 is currently the best replica Audemars Piguet and sold at a much cheaper price than other Audemars Piguet Chronograph watches, you also do not need to worry of sending it back for repairing because the replica itself has a high stability, if you can do a regular care on the watch, it could run accurately for about five years.

Audemars Piguet Rose Gold Rotor

Audemars Piguet 15400 Clasp

Audemars Piguet Royal Oak 15400 Blue Replica

Replica Watches Review

Honest reviews on watches and dealers

Tag Archives: Royal Oak