This replica watch has been improved several times, now I think this is the ultimate version, titanium case, titanium mesh bracelet with the latest super clone 8800 automatic movement. Now in the market, there are two versions of the replica in stock, one is V2, whose bracelet uses steel and movement is still Sea-gull based, the other is this V4, which is equipped with the latest super clone movement was just developed by VS Factory in last week.
This is the latest version from VS Factory, I think this will also be the final version of the replica. I still remember that VS Factory firstly made the replica of this watch in 2020, now VS Factory finally uses a titanium bracelet on the replica. It is a full titanium replica watch now, titanium case and titanium bracelet.
If you bought one before Jan. 2 of 2025, it must be with a stainless steel bracelet.
The color of the bezel insert is correct, dial details and engraving on the back are closest to that on genuine model.
The mesh bracelet is difficult to be made because it is titanium. The weight of the bracelet is only 37.6 grams, which is 20 grams lighter than the previous stainless steel mesh bracelet. The clasp is also titanium made.
The entire watch is about 95 grams.
Use your finger to open that “OMEGA” metal sheet.
And insert the other end of the bracelet, and put the stud in the hole to fasten. Does it look the same as the genuine?
The movement inside is a clone 8806, which is modified on basis of a Sea-gull 2824.
Rotate the crown counter-clockwise to loosen until it pops out.
Then rotate the crown clockwise to wind the watch.
Pull out the crown to the first click position, then you can adjust the hand to set time.
Please notice the factory name, it is VVS, not VS. VVS is a new name just appeared in our market, it has a very similar name to VS, but there is no relationship between them. This replica watch Seamaster No Time To Die made by VVS was also produced by VS before, this is a popular Seamaster 007 replica watch and the edition from VS now has been improved to V4. I do not suggest you buy this replica watch from VVS, even its mesh bracelet uses titanium material and the whole watch is only 93.5grams, but the movement decoration, dial finish and case back finish are not as good as the one made by VS.
The watch designed for James Bond in 007 movie is always a hot topic, it is not only a timepiece for James Bond, at some critical moments, the watch is a secret weapon for him. Upon so many watches designed for James Bond, the most popular models are Seamaster Spectre and this Seamaster No Time to Die, both from Omega, hope Rolex can publish one special model for James Bond in next 007 movie.
About this Omega Seamaster No Time to Die, its best replica was made by VS factory before, and VS indeed made improvement on this watch several times, it has become a very perfect replica watch, unfortunately, because of the raid, VS factory is closed and can not offer this watch now. All Omega Seamaster replica watches made by VS factory before now are discontinued in production. For people who want to buy high quality Omega Seamaster replica watches, I suggest they buy from OM factory, and about the replica of Seamaster No Time to Die, this one made by OR factory is also very good.
First, the replica is made with real solid Titanium material, the case is 42mm in diameter, it is 13.7mm in thickness, this watch from VS factory is also 13.7mm thick. Bezel has a stainless steel round frame and a black Alumnium bezel insert, markers are correctly engraved. I do not know OR factory before, I also do not know what watches they have made before, any way, after checking the finish on the case corners, its curved lugs that are perfectly cut, this replica is really a 1:1 mirror high quality clone.
I love the black dial, the unique arrow icon at 6 o’clock and the patina hour markers make the dial look vintage. Hour hand and minute hand have skeleton stem, second hand has red tip that looks very striking to your eyes. Together with the previous Spectre limited edition, both 007 watches have somewhat vintage style.
Like its dial, there is the unique arrow icon on the case back. Open the back, you will see its movement, which is automatic, OR factory decorated its movement plates and auto rotor to the look of genuine Omega 8806 Calibre, however, this clone 8806 is different from VSF’s 8806 movement, they are not on the same quality level, VSF’s 8806 is much better.
By the way, if you buy this watch, the factory can send one pair of nylon band for free. The mesh stainless steel bracelet is not Titanium made, this is a shortcoming, because genuine watch uses Titanium.
007 series is my most favorite movie, every time there is new 007 movie launched, I will go to the cinema with my girlfriend to watch. In my memory, there will be a special watch in every 007 movie, a Rolex or Omega, in recent movies of 007, it is all about Omega. The latest 007 movie No Time to Die should have come out on April 2nd, but impacted by the virus, the release of this movie will be delayed, however, there is a good news for our movie fans, that is the Omega watch specially launched for this movie has been released, and its replica has come out.
There is another Omega watch published for 007 movie, it is Spectre 007 Limited Edition, I introduced its replica before, it is one of my favorite 007 replica watches. Today, this Seamaster 007 No Time to Die replica I am going to review is made by the same factory, which is VS. This is the latest V2 edition, which was just published in last week, the V2 edition has several places improved, the biggest change lies in its material. On V1 edition, VS factory made a mistake, they made the case with stainless steel material, now on this V2 edition, the case material is changed to Titanium.
VS factory offers two band options for the replica, one is mesh stainless steel bracelet, the other is a nato strap. Buy any one of them and you will get another band for free. Compared with the mesh steel bracelet, I like the nato strap more. The case is made of Titanium material, it has a diameter of 42mm, with thickness of 13.7mm, for a diving-style automatic watch, the case is not that thick. With characteristics inherited from Omega Seamaster, its special bezel shape and lugs with multi cutting faces make the watch easily to be recognized.
Bezel markers are in dark yellow color, which exactly matches with the dark yellow stripes on the nato band. The bezel insert is not ceramic, but made of Alumnium, the bezel tooth around the insert is made of Titanium like case, by the way, the bezel is uni-directional rotating.
The dial is black, it looks a bit complicated compared with the Spectre 007 Limited Edition, which looks simple and clean, on the dial of this No Time to Die, there are more elements, especially the arrow logo above hour marker at 6 o’clock, it is a special icon, does it have special meaning? Hour hand and minute hand are skeleton, with luminous material applied on top and stem, like the hour markers, they are fully filled with lume material, which will offer the wearer a strong and long-lasting luminous effect at night.
The case back is solid, with detailed correct engravings and random serial number. Behind the back, there is a beautiful machine inside, it is an Asia clone 8806 movement, which is not based on any Chinese movement, it was independently developed by VS factory, each separate movement part is made according to genuine 8806 in movement factory, and then assembled by experienced watch master. With such type of clone movement, the accuracy and stability of replicas are much better than before.
At last, VS will offer one card for this replica watch, and one plastic box will be shipped along with it. At this special time, the virus goes crazy abroad, hope you guys stay safe and healthy.