VS Factory Replica Omega Planet Ocean Deep Black with Clone 8906 Movement

Replica Omega Planet Ocean Black

Since the release of Omega Spectre 007 by KW factory, there have been more than two years. Within the two years, KW, also named VS, did not publish any important models that could attract our attention. Once I saw this watch in the market today, I was deeply impressed by its cool black outlook. My watch supplier in the VS factory did not tell me about this watch, I asked why he did not tell me about it, so I can share it with you guys earlier. Fortunately I found it by myself today. I took these photos for you, is it the black so impressive? I am looking for such type of black diver’s watch for a long time. Now, it’s my honor to share the watch with you here. Actually, the replica watch not only has the black version, it also has red and blue editions. I will post the photos of the blue and red ones at last.

Replica Omega Planet Ocean Deep Black
VSF Replica Omega Deep Black
Replica Omega Black Ceramic Dial

Both case and bezel are made of high grade black ceramic material, which are brushed. The markers on the bezel not only have correct engraving depth, they also have the correct color, you can compare it with genuine, the sanblasted bezel markers are full of high quality texture. The dotted bezel pearl is on a sandblasted triangle mark, the bezel pearl will emit a green lume light in the dark. Case back uses Naiad Lock technology, I do not know if VS factory has used this lock technology on this replica, may be not, but the case back could be tightly locked to ensure a great depth of water resistance.

Omega Deep Black Crown
Replica Omega Deep Black Ceramic Case

Dial is upgraded, not the common DLC plated metal, but is real black ceramic. The matte finish of the dial is like that VS factory has done on its bezel. Silver hour markers and hands are all filled with Swiss grade lume material. There are two different lume color on the dial, blue on hour hand and hour markers, green on minute hand. There are one extra hand with an orange triangle tip on the center, it is the 24-hour GMT hand of the replica watch. This GMT hand works the same as genuine. Under such a full black appearance, the replica watch still has a good readability because of its lumed dial and orange color usage on the dial.

Omega Deep Black Crystal Back
Omega Clone 8906

Look through the crystal case back, there are rosy red engravings “CO-AXIAL 8906” on the auto rotor, which has unique decoration that looks the same as genuine Omega 8906 movement. The clone movement is not based on any type of Asia automatic movement, it was independently developed by VS factory. Every component, including the jewels, is imported from the abroad, even the balance wheel is blackened, so even you wear this replica in an Omega boutique, the sales person check it through the crystal back, they are not able to tell it from a genuine.

Omega Deep Black Rubber Strap
Omega Logo on Buckle
Omega Deep Black Blue Watch
Omega Deep Black Red Watch

VS Factory V3 Edition Replica Panerai PAM 505 Radiomir Black Seal Ceramic Watch with Super Clone P.9000

Replica Panerai Radiomir Black Seal

Most popular Panerai watches are the ones with Luminor case. Radiomir is not that popular as Luminor Panerai. However, in the development of Panerai, Radiomir even played a more important role. It is the prototype of modern Luminor Panerai, if you want to find some trace related to Panerai’s richest history as a military watch for the Italy Navy, then you should buy a Panerai Radiomir watch. Today, the replica Panerai watch I am going to review is made by VS factory, which has been specilized in manufacturing good quality PAMs for years. This black Radiomir Black Seal ceramic watch has a reference number PAM 505. It is the latest V3 edition that was published by VSF in the end of 2018.

Replica Panerai PAM 505
VSF Replica Panerai PAM 505
PAM 505 Black Dial

Genuine watch uses a composite material, which is not only ceramic. However, this replica PAM 505 uses an entire piece of ceramic in case construction. The sandblasted finish on the cushion-shaped case feels high quality texture. Onion-shaped crown is so big, you will feel very comfortable when rotating it to adjust hands or date. The crown features a classic OP Logo on the front. Wire lugs are one classic feature of Radiomir, they are removable.

PAM 505 Crown
PAM 505 Ceramic Case

Black dial is sandwiched, the upper plate has skeleton hour markers in stick shape, except Arabic numbers at 6, 9 and 12 o’clock. the sand finish of the black dial is the same as ceramic case. Small seconds hand on the subdial at 9 o’clock runs smoothly, it is applied with Swiss luminous material like central two hands. The printings on the dial have been improved on this V3 edition, I am not afraid you compare the dial with genuine watch, because there are really no flaws you can find.

PAM 505 ASSO Band

The movement is super clone P.9000, which is an in-house caliber by VSF. This movement has been improved by VSF for many times since its first release several years ago, now I do not know whether the factory will still update it or not, but it really has been very perfect. Super Clone P.9000 has many advantages, you could not even tell it from a genuine Cal.P.9000, besides, its inaccuracy is controled within eight seconds.

PAM 505 Crystal Back

I do not like the brown ASSO band on this PAM 505. I think one pair of black leather straps will be more suitable. However, with such a retro style Pre-V buckle, the distressed ASSO band is a perfection for this watch. Without crown bridge, the PAM 505 still has a large size, its diameter is up to 45mm, exactly meets our favor for big-size watches.

PAM 505 Wrist Shot

VS Factory V2 Edition Replica Panerai PAM 688 Luminor GMT Blue Watch with Clone P.9001 Movement

Replica Panerai Luminor GMT Blue

Different from dull materials and black color in the past, now Panerai is more willing to use advanced materials and various colors in watch design. Forged carbon and bronze are widely used in case material of Panerai, the dial color also has more striking blue and green. For example, the PAM 688 is the first Panerai watch I saw with a blue dial, before, I only saw Panerai watches with black dial and black band or brown ASSO strap, now the entire watch is in blue color, which is very rare among Panerai collection. The replica here is a V2 edition of PAM 688 which VS factory published, it is 1:1 cloned with a genuine as reference.

Replica Panerai Luminor GMT VSF
Replica Panerai PAM 688
PAM 688 Blue Dial

The case is made of solid 316L stainless steel, it is completely polished on case, bezel and lugs, the brushed crown bridge with lever have the same operation way as genuine. Look at the case side, the outline of cushion-shaped case is very obvious, the edge of case is smoothly polished so that the watch could have a perfect wearing comfort. The case back is see-through crystal, which shows inner machine clearly, the rim of the case back is engraved with detailed material and water resistant information.

PAM 688 Brushed Crown Bridge
PAM 688 Polished Case

Blue dial is the finishing touch of the replica watch. The dial uses a genuine sandwiched structure, skeletonized hour markers are big and there are big arabic numbers “6” and “12”. Four hands, including the small seconds hand at 9 o’clock, have rose gold edge, which highly contrasting with the blue dial background and white stainless steel case. The GMT hand with a triangle tip in rose gold tone turns 12 hours as per genuine, not 24 hours.

PAM 688 Blue Leather Strap

Inside the case, the movement is a super clone P.9001. Coming from the same factory, P.9001 completely inherits all advantages of super clone P.9000 that was independently developed by VSF. Correct position of balance wheel, independently adjustable hour hand, date setting via hour hand, these could be completely achieved on this V2 PAM 688. The one-piece design greatly enhances the accuracy and stability of this super clone P.9001 movement.

PAM 688 Crystal Back

Blue leather band features white hand stitching, the blue band exactly matches the blue dial, if you want the watch to be fitted with a black leather strap, we can ask the factory to do this favor for you. If you are looking for a Panerai watch as your first replica, please consider PAM 688, not only PAM 688 has a simple and elegant appearance like PAM 111 and PAM 127, but it is also very practical due to the GMT function.

PAM 688 Wrist Shot

VS Factory V2 Edition Replica Panerai PAM 359 1950 3 Days with Super Clone P.9000 Movement

VSF Replica Panerai 1950 3 Days

In recent months, the entire watch market is full of a large number of replica Rolex watches, from the end of 2018 to the beginning of 2019, a lot of factories have published the replicas of the newest Rolex models or improved their existing hot Rolex. Noob, GMF, BP, EW and ARF are those factories that have appeared frequently in recent months, now Noob published the V9 edition of their Submariner and GMT-Master II, ARF is the only factory that could keep the pace of Noob. However, during this period, I rarely heard that there were new Panerai replica watches published in our market, now the watch world is Rolex, no new PAMs. So, if you want to buy the newest replicas of Panerai models published at SIHH 2019, you will need to wait for some time. Today, I still want to share a good quality replica Panerai watch for you, it is the PAM 359 from VS factory. You know, this factory was also called KW or V6 factory before, they made the best quality Panerai replicas. The V2 edition of replica PAM 359 is currently the best one in the market.

Replica Panerai Luminor Marina PAM 359
Replica Panerai PAM 359
PAM 359 Black Sandwiched Dial

The case and bezel are smoothly polished. To prevent scratches caused by frequent operation, the crown bridge is brushed and it has the same construction as genuine watch. Check the case from left side, its cushion shape looks more obvious. The lugs are thin and also polished like the case, they are arc-shaped and perfectly blent with the middle case.

PAM 359 Crown Bridge
PAM 359 Polished Case
PAM 359 Crown Lever

The dome-shaped crystal is sapphire with colorless AR coating, so, whether you see the dial from any angle, the dial will be clearly readable, even under the sun. Genuine PAM 359 also has such type of domed sapphire crystal. The whole piece of sapphire crystal can fit the case very well, no water is able to penetrate into, you can wear the watch when swimming, do not worry.

LUMINOR MARINA
PAM 359 Date Window
PAM 359 Small Seconds Subdial
PANERAI Lettering

The dial is classic sandwiched style, it is in matt black. The hour markers are skeleton Arabic numerals and the disc below is fully applied with Swiss lume material. The markers at 6, 9 and 12 o’clock are larger than other hour markers. Panerai is a very stylish sports watch, while this type of dial makes PAM 359 look a little formal. Small second hand is on the subdial positioned at 9 o’clock, while at 3 o’clock, there is a very small date window that looks elegant.

VSF P.9000 Movement

The movement inside is Super Clone P.9000, which was independently developed by VS factory. The whole movement is not based on a Chinese movement, VS factory bought each original watch component from the Switzerland and assembled them in their own factory, so this Super Clone P.9000 is almost the same as genuine, it has a balance wheel whose position is the same as genuine P.9000.

Super Clone P.9000
Blue Engravings on Panerai Rotor

The following are more details of PAM 359.

Movement: Super Clone P.9000 Automatic, Same Decoration on Movement Plate and Auto Rotor Like P.9000, Correct Position of Balance Wheel, The Best Clone P.9000 Movement Made by VS is Closest to P.9000.
Case: 44mm*18mm, 316L Stainless Steel, Polished
Crystal: Domed Sapphire, Colorless AR Coating
Dial: Black Sandwiched with Arabic Numeral Hour Markers, Swiss Superlume Applied, Super Green Lume
Bracelet: Black Calf Leather with Pre-V Buckle
Water Resistant: 30m

PAM 359 Pre-V Buckle
PAM 359 Wrist Shot

VS Factory V2 Edition Replica Panerai PAM 213 Luminor 1950 Flyback with Super Clone Rattrapante Movement

Replica Panerai Luminor Rattrapante 1950 PAM 213

The development history of replica watch industry is definitely glorious. The material and watch-making technology now have been greatly improved. When I was firstly involved in this industry eight years ago, most replica watches use low grade of stainless steel, the bracelet of these replica watches is even hollow in each link. Now, the materials are better, most are solid 316L stainless steel, some brand replicas use high grade ceramic, forged carbon and bronze. Along with the usage of better materials on replica watches, the development progress of watch-making technology is also remarkable, especially in movement. For example, the super clone 4130 from Noob factory has been very close to genuine Rolex 4130 and can achieve a full slim chronograph function. P.9000 from VS factory now is the best movement used in Panerai replica watches. Some watches even use genuine tourbillon movement. Today, the Panerai replica watch PAM 213 I am going to review uses a rattrapante movement, this is a real rattrapante movement used in a replica watch. The Super Clone Rattrapante movement can achieve all functions of the genuine movement.

Replica Panerai Luminor Rattrapante Watch
BP厂劳力士日志型41mm Datejust II

We have seen so many Panerai watches, they are simple PAM 111, 127 or robust Luminor Submersible 508, 382, etc, but PAM 213 is the first Panerai I saw with such a complicated double chronograph function. Like other Panerai watches, PAM 213 has a big case and features iconic crown bridge, the difference is that PAM 213 has an extra chronograph button at 7 o’clock. Look at the case, it is very large, 44mm in diameter, the thickness is up to 19mm, a little thick I think. Round bezel is polished, while forms a high contrasting with its brushed case. On the right case side, there are two chronograph buttons on and below the crown bridge. In the last of this article, I will show instruction to you on how to operate the double chronograph of the watch.

PAM 213 Case Thickness
PAM 213 Brushed Case

The crystal is also another big selling point of the replica. First, it is a dome-shaped sapphire crystal, the domed sapphire is very hard to be produced and is very rare in our market. Second, the sapphire crystal has colorless AR coating, which is Swiss grade, so the dial below will have a good readability even you read the time under sun light. The dial is black, big Arabic numbers “6” and “12” are raised from the dial, they are applied with thick lume material like other hour markers. Two subdials are sunken, the small dial at 9 o’clock is for display of small seconds, while the subdial at 3 o’clock is for 30-minute chronograph. The dial is not sandwiched, but all hour markers are coated with full Swiss luminescence.

PAM 213 Crystal Back
PAM 213 Rattrapante Movement

The bracelet is black leather, while the outside face has a carbon fibre look, which is so unique, if you are tired of those ASSO band from Panerai, you may get a freshness or surprise by wearing this type of band. The following is specification of the replica watch, and instruction on how to use the double chronograph.

PAM 213 Buckle

Movement: Super Clone Rattrapante Movement, Double Chronograph Function, Highly Stable, Having Been Tested for More Than One Year
Case: 44mm*19mm, 316L Stainless Steel, Polished
Bezel: Smooth Polished
Crystal: Domed Sapphire Crystal with Colorless AR Coating
Dial: Black with Superlumed Hour Markers and Hands
Bracelet: Black Leather Strap with Deployant Clasp
Water Resistant: 30m

  1. You can wind the watch for more than 80 rounds, so the watch will have enough power reserve before you use its double chronograph function.
  2. When the pusher at 2:00 is started, two chronograph hands will move.
  3. Then push the 7:00 down, one chronograph hand will stop.
  4. If you push the 2:00 button agin, the second chronograph hand will stop.
  5. Now if you push the button at 7 o’clock, the hand stopped first will jump to the position of the second hand.
  6. If you want two chronograph hands back to 12 o’clock, make sure two hands are stationary before push the 4:00 button down.

So, this is the guide for you to use the Rattrapante function.

VS Factory V2 Edition Replica Panerai PAM 508 Luminor Submersible with Black Ceramic Case P.9000 Movement

Replica Panerai Luminor Submersible PAM 508

Panerai published Luminor Submersible PAM 508 in 2013, the watch has a big case diameter of 47mm, matte black ceramic case and is equipped with Panerai in-house P.9000 movement. Its design inspiration comes from Panerai traditional design concept in history, each detail is a perfect fusion of history and watchmaking technology. The outlook of PAM 508 is in dark black, which is like the pitch-dark deep sea. The matte black appearance makes the watch have a mysterious and magnificent style. In replica watch market, we all know that VS factory makes the best Panerai replica watches, each model is classic and has a good reputation in the industry. VS factory pursues perfection in details, their independently developed P.3000 and P.9000 movements have become the most classic models in this industry.

Panerai PAM 508 Ceramica
VS Factory Replica Panerai PAM 508
PAM 508 Black Dial

The tough case and angular style make Panerai so unique in Swiss watch industry. The Panerai PAM 508 replica from VS factory inherited the iconic outlook features of Panerai. 47mm case, plus crown bridge, only one word can describe this watch, that is “big”. Like genuine, the replica uses black ceramic as case material, then it is matte finished. The bezel also adopts black ceramic like case, the uni-directional rotating bezel has a luminous pearl and diving markers. Panerai printed the case material name “Ceramica” on its dial. Previous PAM 508 and PAM 441 made in replica watch market did not use real ceramic material, they used stainles steel and then have DLC black coating on surface, now, with the rapid development of watch-making technology, ceramic is widely used by replica watches. Please check the crown bridge, its arc is done perfectly. The round edge of the bezel pearl is a bit higher than the luminescence filled inside, this could give a full protection for the luminous material.

PAM 508 Ceramica Case
PAM 508 Crown Lever
PAM 508 Bezel

Black dial has three-dimensional hour markers that are filled with Super-LumiNova, so are skeletonized hour and minute hands. Small seconds subdial is positioned at 9 o’clock, the small hand and bar-shaped markers on that subdial are also applied with Super-LumiNova, so in weak or dark light condition, you can still read the time from the dial clearly. Above the black dial, it is a very thick sapphire crystal, which has been coated with colorless AR Coating like genuine PAM 508. The length and width of hour and minute hands are also the same as genuine.

PAM 508 Hands
PAM 508 Ceramica Small Seconds Subdial
PANERAI CERAMICA Dial Printings

The P.9000 inside is the latest enhanced version from VS factory, they spent two years to research and improve previous clone P.9000 movement. Now, this new P.9000 looks completely the same as genuine P.9000 Caliber. The movement is independently developed by VS factory according to original P.9000, the balance wheel now is set in a right position, the one-piece movement design greatly improves its stability and accuracy, the service life is also extended. Daily error has been tested by professional machine, it is controled within 10 seconds.

PAM 508 Case Back
PAM 508 Case Back Engravings
PAM 508 Case Back OP Number
PAM 508 FIRENZE 1860

The black leather band is a fine match for this black ceramic watch. This pair of leather straps is made of genuine calf skin leather and has a distressed look. Whatever, the band has a suitable width to match the big case, it feels comfortable to wear.

PAM 508 Buckle
VS Factory PAM 508 Ceramica
PAM 508 Wrist Shot

VS Factory V3 Edition Replica Panerai PAM 389 Luminor Submersible Titanium Case with Super Clone P.9000 Movement

Replica Panerai Luminor Submersible PAM 389

PAM 389, a fusion watch that adopts titanium, ceramic and rubber materials, its movement is the famous Panerai P.9000 Caliber, the watch has a sapphire crystal and brushed titanium case. PAM 389 has antimagnetic inner case to ensure the watch can work accurately. In the movie The Expendables 3, Sylvester Stallone and his teammates were exactly wearing PAM 389, so this watch was sold very well at that time. 47mm big case was exactly built for those tough guy. The dial is very simple and clean, bar-shaped hour markers are superlumed, 9:00 small seconds subdial is classic, P.9000 movement can offer the watch 72-hour power reserve. About this popular Panerai watch, there have already been a replica made by VS factory before, today, the one I am going to give a review is the V3 edition of the replica Panerai PAM 389 by VS factory, whether in outlook or functions, this replica is now closer to genuine.

VS Factory Replica Panerai PAM 389
Replica Panerai Luminor Submersible Amagnetic
Panerai PAM 389 Black Dial

The case of PAM 389 replica is made of solid Titanium, it is brushed, the Titanium case looks a bit darker than stainless steel. The bezel is uni-directional rotating, it uses a black ceramic insert, there are silver stud markers on the bezel, at 12 o’clock, there is a round pearl that is fully filled with luminescence. Case back is solid Titanium and has correct engravings that look so delicate. PAM 389 has a solid case back, I think this is also one reason why its replica is more popular than other Luminor Submersible replicas with see-through back.

Panerai PAM 389 Hands
Panerai Automatic Printings

On black dial, all three-dimensional hour markers are filled with genuine Super-LumiNova, hand are also applied with Super-LumiNova, together with bezel pearl, they will emit a strong green light in dark light condition. The grey dial printing “Amagnetic” under “LUMINOR SUBMERSIBLE” means genuine watch has an anti-magnetic performance. However, when you open the case back of this replica, you will find a piece of soft iron between the case back and movement, so I think this metal is placed here to prevent the movement from being affected by magnetic fields.

PAM 389 Crown Bridge
Replica Panerai PAM 389 Titanium Case

About the Super Clone P.9000 in this Panerai PAM 389 replica, it is the best P.9000 in the market developed by VS factory. With this movement, the hour hand now could be independently adjusted, you can turn it clockwise or anti-clockwise to adjust hours or date, the adjusting way is the same as genuine P.9000 Caliber. Besides, the balance wheel position is changed to be at 7 o’clock, other incorrect versions place the balance wheel at 10 or 6 o’clock. So, the appearance defect of clone P.9000 movement made before was completely solved. From production to assembly, each Super Clone P.9000 movement in VS factory will pass through a lot of tests, finally the daily inaccuracy is controled within 8 seconds.

PAM 389 Bezel
PAM 389 Crown Lever

Panerai has their own distinctive style, which has attracted a lot of watch fans, the PAM 389 I introduced today is even the first choice of many tough guys.

PAM 389 Case Back Engravings
PAM 389 DIVERS PROFESSIONAL
PAM 389 OP Logo
PAM 389 Pre-V Buckle
PAM 389 VS Factory
Replica Panerai PAM 389 on Wrist

VS Factory Replica Omega Aqua Terra 150m Blue Dial with Super Clone 8500 Movement

Replica Omega Aqua Terra 150m

Omega is absolutely one of the best-selling watch brands in the world, it is even sold better than Rolex in some countries such as China. Whether dress watch or diver’s watches, Omega does well in both fields. Seamaster is the most popular series of Omega, it has a lot of amazing models, and also one of the loves for 007 James Bond. In replica watch market, each year there will be two or three Omega replica watches sold well, four or five years ago, the Omega Planet Ocean Liquidmetal made by Noob became one of the best replicated watches and raised a hot discussion in watch forums. Two years ago, V6 factory produced Omega Seamaster Spectre 007, this replica brought a crazy sales, the factory has improved it four times and now only released several pieces each month to the public, so you need to place your pre-order with the factory. Let’s back to this replica Omega Aqua Terra 150m, it is also made by V6, some people call it VS, yes, both mean the same factory. The place that mostly attracts me is its blue textured dial, it is beautiful.

Replica Omega Aqua Terra 150m VS Factory
VSF Replica Omega Aqua Terra 150m
Replica Omega Aqua Terra 150m Blue Dial

The case is made of 316L stainless steel, it has an 1:1 replicated case construction. The case is 41mm in diameter and 12mm thick, it is brushed, look at the lugs of Omega Seamaster, they are in unique shape and greatly different from the lugs of other brands’ diving watches. The bezel is round and smooth, it is polished. The whole case is molded very well, three pieces are installed by professional watch masters. The case has a very natural curvature, its structure meets ergonomic design and can fit your wrist in a very comfortable way. Look at how well the case is made, please check its crown, then you will know how big effort the factory has made to build a perfect case finish. The Ω logo is polished on the sandblasted crown surface.

Replica Omega Aqua Terra 150m Case
Omega Logo on Aqua Terra Crown

Blue dial has textured vertical lines. These are unique textured dial for Omega Aqua Terra series. Each hour marker is polished carefully by VS factory watch master, they have the same size and are filled with white luminescence. The stem of hour hand is also filled with white luminescence, so is the triangle tip of minute and second hands. On this blue textured dial, all printings are in white and the Omega logo at 12 o’clock is in silver, in the dark, the whole dial will emit a strong blue light, which is very beautiful. On the outer dial, there are white minutes markers from 05 to 60. The blue dial is very simple, but already has essential features that make the watch a necessary diver’s watch for an amateur.

Replica Omega Aqua Terra 150m Super Clone 8500
Replica Omega Aqua Terra 150m Super Clone 8500 2

Besides the unique textured dial, the place I am mostly concerned about the replica is its movement inside. This is the fourth time for VS factory to improve this Super Clone 8500 movement. The movement is not based on a common Chinese automatic movement, VS factory bought all genuine movement components from Switzerland and then assembled them, so, this Super Clone 8500 is not simply a Chinese movement with decorated plates and auto rotor. VS factory completely developed this Super Clone 8500 by themselves, the functions are 100% the same as genuine Omega 8500. You can absolutely adjust the date through hour hand. Besides, the Super Clone 8500 has a very high stability.

Replica Omega Aqua Terra 150m Bracelet

During Chinese New Year from January 31 to February 15th, we will continue to publish the latest watch reviews here, hope you guys can find the most suitable replica watch from our watch club site.

Replica Omega Aqua Terra 150m Wrist Shot

VS Factory Replica Omega Seamaster 300m Diver Watch with Blue Wave Dial Nylon Strap

Replica Omega Seamaster 300m Diver Blue

Omega Seamaster is one of the most popular modern diver’s watches, its popularity is second only to Submariner of Rolex, while Omega Seamaster is sold at a much lower price. The design of Omega Seamaster uses a lot of marine elements, such as the wavy bezel and blue color on bezel or band. Today, this Omega Seamaster 300m is actually a diver’s line Omega published in 2018 Basel, it has several models that differeniate each other by dial color and bracelet design. We did a Seamaster 300m Diver watch review before, it is a replica watch with black ceramic dial and bezel, now this replica Omega Seamaster Diver watch is made by the same factory, which is VS watch maker, it features a blue ceramic bezel and a wave dial that perfectly fit the ocean theme of Omega Seamaster watch wants to represent. The replica is the latest model in our market, it uses advanced watch-making technology and the movement is very stable.

Replica Omega Seamaster 300m Diver Co-Axial
Replica Omega Seamaster 300m Diver Watch
Replica Omega Seamaster 300m Blue Dial

The entire watch is in a very leisure style, this replica is not thick, only 13mm, so it could be easily worn under your shirt. Like most replica watches, the Omega Seamaster Diver blue replica is made of 316L stainless steel, the case is 42mm in diameter and brushed, polygonal bezel has wavy edge like the water wave in the ocean. The bezel frames a blue ceramic insert and has markers filled with platinum coating. The bezel pearl inside the big white triangle is filled with white luminescence, but not that full on the bezel pearl on Submariner. The He button at 10 o’clock does not have the real function. Look at the case back, there are black engravings of “DIVER 300M” that exactly saying the production line of the Omega watch. The nylon band is connected to the case through high quality stainless steel pins.

Replica Omega Seamaster Blue Crown
Replica Omega Seamaster He Valve Button

The dial is in blue, which exactly echoes with the blue ceramic bezel. The dial uses ceramic as base plate, and there are wave patterns, this is the biggest feature of this Omega Seamaster watch that distinguishes it from other Omega Seamaster Diver watches. This is the first time for Omega to use a wavy pattern design on the Seamaster dial. Sword-shaped hands have been skeletonized on the center, the central second hand has a red tip that matches the red stripes on nylon band. Big dot hour markers are fully filled with white luminous material to guarantee the lume light strong and long lasting, the blue dial has a high readability in any light condition.

Replica Omega Diver 300m Crystal Back
Replica Omega Diver 300m Clone 8800

The movement inside the case is a clone 8800, VS factory made this movement on basis of an Asia ETA 2836-2, to make it look closer to genuine Omega Cal. 8800, VS added plates on top and did some polishing and engravings on the auto rotor and plates. Although the whole movement is not independently developed by factory like Super Clone 8400, but it still has a super realiability.

Replica Omega Diver 300m with Nylon Strap
Replica Omega Diver 300m Blue Red Nylon

The nylon band has multi-color stripes, there are blue, grey and red color on that band. The factory also offers a stainless steel bracelet for this replica watch, certainly, you can buy the stainless steel model and I will send you one pair of nylon straps for free.

Movement: Asia Clone 8800 Automatic, Based on Asia ETA 2836-2, With Decorated Auto Rotor and Plates, Perfect Finish on Movement Plates with Correct Engravings
Case: 42mm*13mm, 316L Stainless Steel Made, Brushed Finish
Bezel: Blue Ceramic with Platinum Markers
Crystal: Sapphire with Swiss AR Coating
Dial: Blue Waved Dial with Dot Hour Markers, Superlumed Markers and Hands, Ceramic Dial Plate
Bracelet: Nylon Strap with Pin Buckle
Water Resistant: 50m

Replica Omega Diver Blue Wrist Shot

VS Factory V2 Edition Replica Panerai PAM 616 Luminor Submersible Carbotech with Clone P.9000 Movement

Replica Panerai PAM 616

Certainly, in automatic watch field, Rolex Submariner is the most popular diving watch, I agree with this point of view, its superior stability and accuracy have won a lot of praise from amateur and professional divers. Rolex and Panerai are two of my most favorite watch brands, while they differentiate from each other greatly. Rolex has a wide product line that covers production of dress watches and a lot of functional watches like diver’s watches, GMT and explorer watches. While as a military watch specially made for the Italy Navy, Panerai is born to be a diving watch, whether its Luminor, Radiomir or Luminor Submersible, these Panerai models all integrate the design elements of diver’s watches. Besides, compared with Submariner, Panerai uses more advanced materials in the making of Luminor Submersible, in recent years, they added bronze and carbon two new materials in the design of Luminor Submersible. I think this is also the reason why more and more watch fans choose to wear Panerai.

VS Factory Replica Panerai PAM 616
VS Replica Panerai Luminor Submersible CarboTech
PAM 616 Black Dial

Today, I want to give a review on a replica Panerai Luminor Submersible watch that has a very cool outlook. Its reference is PAM 616. The replica watch is made by VS factory and this is the V2 upgraded version, which was just published in December, 2018. The genuine watch is made of new material Carbotech Panerai developed, while the replica has a case that is fully made of forged carbon, which has detailed and grained textures like genuine Carbotech case. Forged carbon is light in weight but highly scratch resistant. You can find these unique patterns are more obvious on the case side. The case back is blackened metal, it is solid and engraved with a lot of information, which includes the special S.L.C. logo.

LUMINOR SUBMERSIBLE
PANERAI CARBOTECH

Black dial has a good matte texture. There are big 12 and 6 numeral markers, other hour markers are small dots with blackened metal edge. The dial does not have too many things to talk, the things that attract me most are the light blue small second hand and “CARBOTECH” printing. The small square window opened at 3 o’clock features white date font in black background. By the way, all hour markers and hands are applied with Swiss grade Patina Superlume, the dial lume is authentic green, strong and long lasting.

PAM 616 Carbon Case
PAM 616 Crown Bridge
PAM 616 Forged Carbon Case Texture
PAM 616 Forged Carbon Crown
PAM 616 Crown Lever

The Panerai PAM 616 replica uses a black rubber band, the factory also offers one pair of blue leather straps for free. The Pre-V buckle fitted on the band has black PVD coating processing. Rubber band is the best match of this Panerai Luminor Submersible watch because it is dustproof and waterproof, more convenient to wear than the leather band. A lot of tough men love to wear Panerai watch, Sylvester Stallone is a big fan of Panerai and the Rock Dwayne Johnson wore this PAM 616 in movie Fast 8.

PAM 616 Case Back Engravings

At last, the replica is an upgraded version from V1 edition, its time could be independently adjusted, while the date needs to be adjusted through hour hand. The time and date adjustment is the same as genuine.

PAM 616 Case Back Engravings 2
PAM 616 Case Back Engravings 3
PAM 616 Pre-V Buckle
PAM 616 Wrist Shot
PAM 616 with Free Blue Leather Strap