VS Factory Replica Panerai PAM 351 Titanium Watch with Super Clone P.9000

Posted on September 27, 2019 by Jason

Now I have written a lot of reviews on different Swiss brands, which include Patek Philippe, Audemars Piguet, Rolex, Panerai, IWC, etc. Among them, IWC and Panerai are my two most favorite brands, however, there are not too many new models among these two brands, since the beginning of 2019, only a few new Panerai replica watches published in our market, so many PAMs reviewed on my blog have actually been improved for several times, today, I want to show you a titanium-made Panerai replica watch, it is PAM 351, made by VS factory, this is the latest V2 edition.

The case of PAM 351 is made with Titanium, compared with stainless steel Panerai watches, I like this Titanium PAM 351 more. The case is classic cushion-shaped and features Panerai’s iconic crown bridge, it is measured to be 44mm in diameter. The case is thick, it is 18mm, I did not see a genuine watch, but I think it is much thicker than genuine PAM 351. Because the replica uses a clone P.9000 movement, although it is called a super clone P.9000 by VS factory, the movement is actually based on an Asia Chronograph which we call Asia Valjoux 7750, that movement is thicker than Panerai P.9000.

The dial is not black, it looks a bit grey, actually it is in tabacco brown. Like genuine PAM 351, the replica uses a sandwiched dial, hour markers are skeletonized, they are big and clearly visible. Small second hand runs on the subdial at 9 o’clock, like central hour and minute hands, they all have golden edge, while the center is filled with Swiss lume material. The dial of PAM 351 looks extremely simple, like the whole watch, it looks generous.

Brown leather strap is another selling point of this PAM 351, it matches the tabacco brown dial better when being compared with black leather band. Like PAM 312 introduced in my last post, PAM 351 also uses a Pre-V buckle that is brushed. The brown leather band has a high quality texture due to the croc embossed patterns, it also feels very soft to wear. The following are more details of this replica Panerai.

Movement: Super Clone P.9000 Automatic, Movement Plates and Auto Rotor Are Decorated to Look of Panerai P.9000, Balance Wheel Set at 7 o’clock
Case Size: 44mm*18mm
Case Material: Solid Titanium
Crystal: Domed Sapphire with Colorless AR Coating
Dial: Sandwiched Tabacco Brown with Stick and 6-9-12 Hour Markers
Band: Brown Leather Strap with Pre-V Buckle
Water Resistant: 30m

VS Factory Replica Panerai PAM 312 Luminor 3 Days with Super Clone P.9000

Posted on September 24, 2019 by Jason

There are a lot of good quality replica Panerai watches in our market, most of them are made by two factories VS and ZF, absolutely VS has the most complete collection, other factories that also make PAMs can not catch up with VS, if you want to choose your first Panerai watch, please be sure to buy one made by VS, because their quality is the best. From the last picture in this post, we can see all Panerai models in stock by VS factory, each of them is on hot sale, if you are interested in some, please let me know.

In the “Panerai” category of my blog, those are the hottest PAMs in our market, actually every piece of PAMs shown in the last picture is very hot. Today, I will add another great Panerai timepiece to this category, genuine watch is Luminor 3 Days PAM 312, while the replica can not achieve 3-day power reserve. However, this replica is perfectly finished, it is another pround of VS factory.

Compared with other Panerai models like PAM 111, PAM 127 and even the most popular PAM 441, I found that the Panerai watch like PAM 312 is actually my most favorite. First, it is stainless steel, with black dial and black leather strap, which looks very elegant and is more suitable to be worn in formal occasions. Second, I like PAM 312’s style because has modern Panerai’s outlook while still keeping some retro features.

The brushed case forms a high contrast with its polished round bezel. The black dial is framed by a stainless steel case that is measured in 44mm in diameter. It is a sandwiched, with bar-shaped hour markers except Arabic numbers at 6, 9 and 12 o’clock. On the big dial, every thing looks big, especially the hour markers, it seems like this is the common feature for all Panerai watches. Like genuine PAM 312, the date window set at 3 o’clock has a plump date font that looks a bit yellowish. The dial completely uses the sandwiched structure that is the same as genuine watch.

On the crystal back, the machine shown through is a clone P.9000, VS factory called it Super Clone P.9000, maybe it is because they change the the balance wheel position to the right 7 o’clock, together with 8XXX series movement, both movements developed by VS factory has a super accuracy and stability.

At last, please check the specification below:

Movement: Super Clone P.9000 Automatic, Decorated Auto Rotor and Movement Plates to Look of Real Panerai P.9000
Case: 44mm*18mm, 316L Stainless Steel
Crystal: Domed Sapphire with Colorless AR Coating
Dial: Black Sandwiched Dial
Bracelet: Black Calfskin Leather with Pre-V Buckle
Water Resistant: 30m

All PAMs by VS factory, in stock. Please check the photo below:

Z Factory Replica Jaeger LeCoultre Master Control Geographic Power Reserve Watch with Clone 939A

Posted on September 23, 2019 by Jason

It has been several days for me not to post a watch review here, sorry about that, I have been very busy in recent days, every day I needed to go to the market and find watches ordered by my clients, so when I was back home from the watch market, it was already mid-night, after that, I took QC photos and videos for my clients, replied message, so time is limited, I do not have too much time to update my blog, hope you understand.

ZF Replica Jaeger LeCoultre Master Control Geographic

Replica Jaeger Lecoultre Geographic Silver Dial

Today, it is Saturday, I have some time to walking around the street and to find some new arrivals, in recent days, there are few new watches in our market, except the new GMT-Master II from Noob, however, in these days, Noob also brought us a very good news, is that they published the V3 edition of their Super Clone 4130 Daytona, because of its super hotness, you still need to wait for a long time if you want to order one from them.

Now, I am going to give a short review on this Jaeger LeCoultre replica watch which I got it from Z factory last night. It is a watch with multi functions, which include hours, minutes, seconds, date, power reserve, day and night display, second time zone display. For a genuine Jaeger LeCoultre watch, it must be sold at an expensive price, because it has so many functions. For a replica, many people are also willing to have it, because many of them are exactly looking for such a replica watch with multi functions.

The case is made of stainless steel, it is measured to be 39mm in diameter, Z factory makes the case thickness to be the same as genuine, which is 11.5mm. The case and bezel are polished, with lugs that are extended very naturally. There are two buttons on the case, the crown at 3 o’clock is for time adjustment, you can rotate the button at 10 o’clock to adjust fan-shaped world time display, while there is a small button at 2 o’clock, push it and you can adjust date.

On the dial of the replica, it has a lot to display, all functions of the watch can be read from the dial, however, on this 39mm dial, although there are so many things displayed, they are not looking crowded, the arrow-shaped hour markers exactly echo with the sword hands, central long second hand is just smoothly sweeping the whole dial just like genuine, it is a perfect watch for people who like an elegant dress watch while need to travel a lot.

Both the front and back are made of sapphire crystal, seeing through the sapphire crystal back, a perfectly cloned movement is displayed in front of your eyes, it is a clone 939A that is based on Japanese Miyota 9015, this movement helps the replica to achieve all functions that can be seen on a genuine.

For a multi-functional watch, this Jaeger LeCoultre Geographic is an ideal tool watch, I like its style and also want to get one from Z factory, if any one of you guys is interested in, please let me know.

JH Factory Replica Audemars Piguet Royal Oak Chronograph 26331 with Asia 7750 Secs@6

Posted on September 18, 2019 by Jason

We have already known that JH factory has another name that is OM and they have started to make Audemars Piguet replica watches since 2019. In the past, JH only made some Audemars Piguet Royal Oak classic models like 15400, but now they have extended their business to Royal Oak Chronograph filed. Today, I will give a short review on the following replica Audemars Piguet Royal Oak Chrono watch, which is made of stainless steel and features a black dial.

JH Replica Audemars Piguet Royal Oak Chronograph

Replica Audemars Piguet Royal Oak Chrono Black Dial

In my previous posts, I said that the best Audemars Piguet replica watches are made by J12 factory, whether the basic Royal Oak 15400, or Royal Oak Tourbillon, or Royal Oak Offshore, the best replicas belong to J12, we have to admit this, however, these replicas from J12 also have very expensive prices, even the basic Royal Oak is sold at more than $460 usd. So, those Audemars Piguet replica watches from JH factory give us a very affordable option.

Audemars Piguet Royal Oak Chronograph Stainless Steel Case

Audemars Piguet Royal Oak Chrono Buttons

The watch has a stainless steel case and bracelet, it is sold made. The brushed case finish is highly contrasting with the octagonal bezel that is polished. There are chronograph buttons on the right case, you can operate them like you did on a genuine Royal Oak Chronograph watch, when you push the button at 2 o’clock down, the central big second hand will start to work, however, this replica watch does not have a full chronograph function, I mean the 30-minute chronograph counter and 12-hour chronograph counter at 3 and 9 o’clock with no function. The only working subdial is the small seconds positioned at 6 o’clock. I do not know why JH factory did not give it a full chronograph function, actually they can achieve the function easily.

Audemars Piguet Royal Oak Chronograph Stainless Steel Bracelet

Audemars Piguet Royal Oak Chronograph Stainless Steel Clasp

Besides the big fault chronograph display, the dial of the replica is made very accurate. Especially the date window, it is very close to genuine and not like most other Audemars Piguet replica watches, it is not recessed at all. By the way, like Audemars Piguet replica watches from J12 factory, this AP replica watch from JH factory also has correct and strong green lume color.

Audemars Piguet Royal Oak Chronograph on Wrist

Overall, if you want to buy one replica Audemars Piguet watch with high grade case finish and perfect clasp engravings, please go with J12 products, if you do not have enough budget and want an affordable replica AP, please order from JH(OM) factory.

Audemars Piguet Royal Oak Chronograph Stainless Steel Collection:

Audemars Piguet Royal Oak Chronograph White Dial

Audemars Piguet Royal Oak Chronograph White Subdials

Audemars Piguet Royal Oak Chronograph Blue Dial

Audemars Piguet Royal Oak Chronograph Grey Subdials

Audemars Piguet Royal Oak Chronograph Rose Gold Collection:

Audemars Piguet Royal Oak Chronograph Rose Gold Black Dial

Audemars Piguet Royal Oak Chronograph Rose Gold Blue Dial

Audemars Piguet Royal Oak Chronograph Rose Gold White Dial

Audemars Piguet Royal Oak Chronograph Rose Gold

VS Factory Replica Omega Seamaster Diver 300m Black Ceramic Watch with Clone 8806 Movement

Posted on September 16, 2019 by Jason

Replica Omega Seamaster Diver 300m Ceramic

It has been three days since I updated the last review on my blog, because I have been going for a short holiday with my family. I spent the past three days with my family in Hong Kong, I also met with one of my clients there, we discussed how to strengthen our cooperation, so we can bring more good replica watches to people who really like them. He was the biggest distributor of mine in Hong Kong, over three hundreds pieces of watches he will buy each month, so if you have large orders, please find me, I can give you the best price.

VS Factory Replica Omega Seamaster Diver 300m

VS Factory Replica Omega Seamaster Diver Watch

Replica Omega Seamaster Diver Black Lume Dial

Because I have not been in Guangzhou for almost three days, when I was back in this evening, I went to the watch market and found a lot of new models. There are also some new factories that appeared in our market, some factories with names we have never heard off. These new factories usually published some popular models that have already been made by some famous factories like Noob, AR and J12, I do not know if their quality is good or not, because my clients have not bought these models, so I can not give my honest reviews, currently on my blog, I will continue to do reviews on replica watches produced by big famous factories.

Today, I am going to introduce one Omega Seamaster replica watch from VS factory, there have been several replica Omega Seamaster watches reviews posted on my blog, about this new Seamaster watch with wavy dial, it is a full ceramic watch, if you want the stainless steel or golden model, VS factory also has it, if you want the one whose dial does not have wavy texture, VS factory also makes it. In a word, currently in our market, VS factory now has the most complete collection of replica Omega Seamaster watches.

Replica Omega Seamaster Diver Crystal Back

The watch is in full black color, except the hour markers filled with white luminescence and the bezel markers that have platinum coating. The case is made of black ceramic, so is the bezel, some people may like some watches that are fully made of ceramic, however for this Omega Seamaster, I more like it with stainless steel case and stainless steel bracelet. The Omega Seamaster Diver replica with stainless steel case and bracelet, which is made by MK factory, has becomes one of the most classic Seamaster models in our market. Nowadays, more and more Swiss brands are willing to develop and use new materials in watch making, but sometimes the new watches they published each year have abandoned some classic features that have been existing in their previous models.

Replica Omega Seamaster Black Rubber Strap with Buckle

About the movement, it is a clone 8806 that is modified on basis of a Chinese automatic movement. Now in all clone 8XXXX series movements developed by VS factory, the balance wheel has been updated to be in correct black color tone, the position is also right. One of my clients who usually bought watches from me, said that he was not able to compare the difference between the replica and his genuine Omega, even the watch has a see-through crystal back, are you able to find the difference?

JH Factory Replica Rolex Daytona 116503 Two Tone with Blue MOP Dial

Posted on September 12, 2019 by Jason

JH Factory Replica Rolex Daytona Two Tone

Daytona is an important model of Rolex, together with Submariner, both are two of my most favorite Rolex watches. Although Daytona is not as popular as Submariner, but it is the only one Rolex watch with chronograph function, as your first watch, maybe more people are willing to choose Submariner, for some women, the Daytona can be considered as one of their options, because there are a lot of Daytona models suitable for women. Actually among all Rolex watches, I think Daytona is neutral, I mean Daytona is suitable for both men and women.

Replica Rolex Daytona Yellow Gold Diamond Watch

Replica Rolex Daytona Two Tone Yellow Gold Watch

Today, I am going to introduce a golden Daytona watch, it is made by JH factory. Currently among all factories that make Rolex Daytona replica watches, JH and BP factory have the most complete collection. Although the Daytona watches from JH factory do not have the same quality of those made by AR or Noob factory, but JH factory has their own advantage, that’s is low price. This Daytona replica watch from JH factory is two tone style, the case is made with 316L stainless steel, and then being plated with 18K yellow gold. The bracelet has middle links plated with 18K yellow gold.

Rolex Daytona Chrono Buttons in Yellow Gold

It is a great watch for women who love shiny face and brilliant diamonds. When my wife saw this watch today, she was attracted by its beautiful dial, and she did not want me to return it to the factory after taking these photos, she wanted to keep the watch. So, the watch is still on her hand now. The dial immediately differentiate the watch from other Daytona models. The dial uses blue MOP, hour markers use diamonds except the 15, 30 and 45 numbers at 3, 6 and 9 o’clock. Three subdials are golden, which exactly meet the color tone on case, bezel and bracelet.

JH factory made improvement on the movement, which is an Asia Valjoux 7750. On the basis of their early 7750 movement, this time JH factory improved the decoration on the plates and rotor, so the whole movement looks very close to genuine Rolex 4130 in outlook. Actually the function of this clone 4130 movement is also the same as genuine, besides hours, minutes, small seconds, the replica also has a fully functional chronograph. For most replica watches, they are water resistant, but I do not suggest you wear them for swimming, especially for chronograph watches like this Daytona, you’d better take it off before jumping to the pool.

YL Factory Replica Glashutte Original Sixties Vintage Watch with Green Dial

Posted on September 11, 2019 by Jason

I never wrote reviews on Glashutte watches before, actually I like this brand, together with A.Lange & Sohne, these two brands represent the highest watch-making level of Germany. Without garish dial decoration, Glashutte always has orderly design. I always want to buy one A.Lange & Sohne or Glashutte watch, but it is more expensive than most Swiss watches.

In our watch market, few factories make Glashutte replica watches, and also few people are willing to buy them. I do not know why. Maybe under sports watch trend, the formal watch Glashutte is not that popular like Rolex, Panerai and IWC. However, if you want to buy a genuine watch, then Glashutte should be considered.

I did not take much notice on the Glashutte before, til I saw this green dial watch several days ago. The replica is made by YL factory, maybe this is the only one Glashutte replica watch made by a big factory in our market. The watch does not have too many selling points, the only thing attracts me most is its green dial with unique texture, together with the special numeral hour markers, this is a green dial with vintage flavor.

Besides the special dial, the movement shown through the crystal case back is also something I like. It is an Asia automatic movement, YL factory made some changes on movement plates and rotor according to genuine Glashutte Cal. 39. Although the factory spent a lot of time and effort in cloning the movement, however, if you compare it with genuine, the difference is still there.

About the black leather strap, it uses high grade calf skin leather to make, while there are embossed crocodile patterns that make the band look high quality. If you want a watch that has aged feeling, then this Glashutte will be a good choice. However, at its price, you can buy a very good IWC replica watch. So, if you are not crazy about Glashutte, you will not buy it.

Z Factory Replica IWC Top Gun IW389101 Ceramic Watch with Black Nylon Strap

Posted on September 10, 2019 by Jason

When I first saw this replica IWC watch in the morning, I think it will become one of the best-selling replica watches in next months. My blog readers always asked me about the replicas of IW389101, but there were no good replicas of it in the past, just a few days ago, Z factory published it, and today, I feel so excited to introduce this great timepiece to you guys.

I never thought that Z is the first factory to make the replica IW389101, because V6 was always active when making the replicas of new IWC Pilot Top Gun watches. Both factories are big and have their iconic watches, however, even V6 will publish the replica of IW389101 in future, its quality is not able to be compared with that of Z factory. Do you know why some models from Z factory are sold at much more expensive than V6, because these watches have better case finish, I mean the polishing on case and clasp is better. In my opinion, the big three currently in our market are J12, ZF and V6.

This latest IW389101 completely inherits the classic design of previous Top Gun, in next years, I think it will be the flagship Top Gun model. The replica here is completely in black color, with white hour markers and hands on the dial, this is a very classic design which you will be never tired of. Both case and bezel are made of black ceramic, which is brushed in matt black finish, about solid case back, Z factory uses Titanium, and the case back has been engraved with TOP GUN Signature.

The dial is black and riches in functions, including hours, minutes, small seconds, day and date, together with three subdials positioned at 6, 9 and 12, the dial does not look crowded. Compared with V6 Top Gun, I still think that ZF makes better in dial details and case finish. Some people even compared my top replica watches from big factories with those cheap replicas sold on DHgate, they never realized that a replica watch today can be made so perfect and looks very close to genuine. Some people also doubt the reality of its chronograph function, this is completely ridiculous, these people do not know how rapidly our watch industry develops.

I am very sure that V6 will make this watch, but you do not need to wait, this one from ZF is the best.

JB Factory Replica Richard Mille RM53-01 Tourbillon Pablo Mac Donough with Blue Rubber Strap

Posted on September 9, 2019 by Jason

I have introduced several pieces of Richard Mille replica watches on my blog, they are very beautiful timepieces, most of them are made by KV factory. In my past memory, there are no high quality replicas of Richard Mille watches in our market, but since the foundation of KV factory, they published a lot of good quality replica Richard Mille watches. However, this replica Richard Mille you see in the article is not made by KV factory, it is made by JB factory. You know, in our market, all good quality tourbillon watches are made by JB, including the Roger Dubuis tourbillon replica I just introduced in last post.

Replica Richard Mille RM53-01 Tourbillon

The combination of forged carbon and tourbillon makes it a hot replica since being introduced to the public. In the past, it was hard to see a replica watch that is made of advanced carbon material and uses tourbillon movement. The tonneau-shaped case looks big, it is 44.5mm*51mm, but is 17.5mm thick. Although the watch has a big size, it can still fit people with small wrist very well due to its tonneau-shaped case, the arc-shaped case of Richard Mille watch is more in line with the ergonomic design principle than any other Swiss watches.

Replica Richard Mille RM53-01 Skeleton Dial

Replica Richard Mille RM53-01 Tourbillon Device

The replica uses real forged carbon material. There are unique prints on the case and twelve star-shaped screws being fixed. Dial looks high technical. First, it is skeletonized and completely shows the machine, this increases the difficulty for JB factory in replicating this Richard Mille watch. Second, the skeletonized dial exactly shows the beautiful working of tourbillon in front of you, this is a wonderful moment for all tourbillon watch lovers. In factory, to make a dial with such a complicated mechanical structure, it took a lot of time for JB factory to complete.

If you really love a tourbillon watch, I give you two options, Franck Muller Vanguard and this Richard Mille RM53-01 Carbon, both are good replicas and made by big factories. Besides, compared with the Roger Dubuis double tourbillon, they have cheaper prices. With black carbon, hand winding tourbillon movement and blue rubber strap, this Richard Mille should be more suitable for fashion young people.

VS Factory Replica Omega Seamaster Diver Two Tone Rose Gold with Clone 8800

Posted on September 6, 2019 by Jason

Omega Seamaster is absolutely one of the diver’s watches that have developed rapidly in recent years, its popular even has exceeded Rolex Submariner. Now, every one likes diver’s watches, most of them are willing to choose Omega Seamaster as their first diving watch. This latest Omega Seamaster Diver 300 was published in 2018 Basel, it has a very unique dial that features wavy textures. About this Seamaster model, there are several styling options you can choose, including stainless steel and golden, the watch can be either equipped with stainless steel bracelet or nylon strap.

Replica Omega Seamaster Diver 300m Rose Gold

Replica Omega Seamaster Diver 300m VS Factory

Replica Omega Seamaster Diver Black Dial

I my previous posts, I gave reviews on several replica Omega Seamaster Diver 300 watches, they are made by MK, OM and VS factory, together with this Omega Seamaster replica, they are all high quality replica watches. Compared all Seamaster Diver 300 models, the one I love most is the black model that is made with stainless steel and features a black dial. However, about this two tone rose gold model, it is not my style, but I am very sure this watch will be loved by some one else.

Replica Omega Seamaster Diver 300 Rose Gold Case

Replica Omega Seamaster Diver 300m Crown

Compared the Seamaster Diver 300 with Planet Ocean, the former watch looks smaller, however, both have classic models, especially Seamaster 300m, do you still know Spectre 007? It is still a very hot Omega replica watch in our industry. Once VS factory released its stocks, they will be sold out immediately.

The case is made of 316F stainless steel and has 18K rose gold coating. It is the case specially made for Omega Seamaster and has multi corners, especially the lugs that have multi cutting faces, which make the case full of angular feel. Different from the clicking tooth bezel on other diver’s watches, the bezel of Omega Seamaster has big waves, it has black ceramic insert, the bezel markers are in golden color tone that exactly meets the rose gold tone on case and bracelet.

The dial is black, the wavy textures on the dial make the watch stand out among all Omega Seamaster watches. On this small dial, the dot hour markers are big and filled with white luminescence. Sword-shaped hour and minute hands are skeletonized, the date window is upgraded, white date font is improved with correct font thickness, and it is aligned.

Replica Omega Seamaster Two Tone Bracelet

By the way, VS factory made a big improvement on the movement, that is the black balance wheel. First, VS factory developed this clone 8800 movement by themselves, and they make it to the correct black tone, this is a big progress they have made, so even somebody observe your watch through the crystal back, it is still hard for him to know this is a replica.

Replica Watches Review

Honest reviews on watches and dealers

Monthly Archives: September 2019