ZF Replica Audemars Piguet Royal Oak 41mm 15500 with Blue Dial Clone 4302 Movement

Replica Audemars Piguet Royal Oak 15500

Audemars Piguet Royal Oak must be in the list of stainless steel watches people mostly want to buy. The design of AP Royal Oak is so classic, it attracts men’s attention and wins their heart, one AP, one Rolex and one Patek Philippe Nautilus, these are most sought after stainless steel watches for men, among these three, AP Royal Oak can best reflect the mechanical beauty of an automatic watch. However, every watch published by Audemars Piguet has a high price, maybe for rich people, the entry-level model is Royal Oak 15400, but for me, all AP watches are beyond my budget, then the replicas give people a chance to own such a great mechanical watch, without needing to pay a lot. Actually good AP replicas are also very expensive, most people only want to spend less than 300 USD to get one top replica watch, that’s impossible. Nowadays, almost each top quality replica watch produced in Chinese market has a price over 400 USD, and the trend is that the price will go higher and higher, because factories make them better.

XF Replica Audemars Piguet Royal Oak 15500
Replica Audemars Piguet Royal Oak 15500 Blue
Replica Audemars Piguet 15500 Blue Dial

Today, I want to introduce one new product from ZF factory, it is replica Audemars Piguet Royal Oak 15500. In the past, Royal Oak has a very famous model in our market, it is 15400, and mainly made by J12 factory, now, ZF also started to make 41mm Royal Oak replicas, including 15400 and 15500, their quality is also very good and has formed a competitive situation with J12 factory. Some people said that ZF 15400 is better than 15400 from J12 factory, why they thought so? I think both are good choices, can not say which one is better, you know, in making full stainless steel watches, J12 factory has advantage over other factories.

AP 15500 Crown
AP 15500 Case

This time, ZF published replica 15500, the collection contains four models, black, white, gray and blue, the most popular are black and blue, today, I took some photos of the blue one to share with you. Compared with 15400, Audemars Piguet made some changes on the dial of the new model 15500, I did not notice these changes until I check its dial carefully again. Not too many changes, the 15500 still looks very classic, I like it. ZF also does a good job in replicating this Royal Oak watch, well, if you own a genuine 15400 or 15500, you can still find some difference.

AP 15500 Bracelet
AP 15500 Clasp

First, the sandblasting finish of AP logo on crown face is not as good as genuine watch. Second, the movement of genuine 15500 has a power reserve up to 70 hours, while the replica uses a clone 4302 movement based on Japanese Miyota 9015, its power reserve is only 36 hours, besides, the position of balance wheel is also not correct. These are two differences I can see with my eyes when comparing with genuine watch photos. There are indeed other difference, you can tell us by leaving comments below, thanks.

AP 15500 See-through Case Back
AP Clone 4302

By the way, ZF makes the case thickness correct, the replica is only 10.4mm thick, that’s very impressive. ZF sells their 15500 replica at less than 500 USD, almost the same as the price of 15400 from J12 factory, if ZF has a better quality, why not sell at a higher price? What do you think?

AP 15500 Wrist Shot
AP 15500 Box

XF Factory Replica Audemars Piguet Royal Oak Jumbo Extra Thin 15202 Blue Dial with A2121 Movement

Replica Audemars Piguet Royal Oak 15202

Patek Philippe, Vacheron Constantin and Audemars Piguet are big three in Swiss watches industry, not only due to their rich history, but they also master the most advanced watch-making technology. Take Audemars Piguet for example, as their most successful series, Royal Oak is considered to be a must-have bracelet-style watch for men. Audemars Piguet Royal Oak is more worn as a bracelet jewelry by men in most cases, rather than a wrist watch. Audemars Pigiet also has their entry-level models, such as 15400, it has a big need from the watch fans and also sold very well as a replica in our market. If you want to buy a replica of Royal Oak, I always recommend J12 factory, yes, they make the best AP, whether it is a basic model or a complicated ROO [email protected], you will make no mistake if purchase from JF. However, some specific AP models made by other famous factories also have good quality, sometimes sold at a cheaper price than JF, like this Royal Oak Extra Thin 15202 made by X factory, we call it XF here.

Replica AP RO 15202
Replica Audemars Piguet 15202
Replica AP Blue Dial

The latest V5 edition of JF Royal Oak 15400 is measured to be 10.7mm in case thickness, that case has already been very thin, but it can stand very high on your wrist when you wear it. However, wearing RO 15202 will not have this issue. The case is 39mm in diameter, which is 2mm smaller than 15400, it is also only 8.5mm thick, which is much thinner than 15400, that’s a very ideal height for most people.

Audemars Piguet 15202 Case
Audemars Piguet 15202 Crown

Currently XF only offers blue dial for 15202, that’s a pity. Hope they can produce black, white or grey in future. Certainly, the biggest advantage of this replica watch is its extra thin case, but the movement is also worth mentioning, first, what movement it is based, I do not know, XF also did not claim. Second, if it is not based on any Asia automatic movement, how XF produce it, or is it really independently developed by themselves according to a genuine AP Calibre 2121? Third, will the auto rotor have a noise when you shake the watch on hand? None of my clients have bought this replica watch, so currently I can not give you any feedback.

Audemars Piguet 15202 Crystal Back
Audemars Piguet 15202 2121

Look at the blue dial, is it weired? There are only hours and minutes hand on the center, compared with 15400, it lacks a seconds hand on the dial. Actually I do not like this style, I like the 15400 more with three hands, but to make the movement thinner, the seconds module must be abandoned, right? I am not an expert, I just guess. The silver “AP” logo also changed position, now it stands above the stick marker at 6 o’clock.

Audemars Piguet 15202 Bracelet
Audemars Piguet 15202 Clasp

Did you know the AP ROO Diver made by XF? Yes, it is in high quality and still has a lot of followers . So, about this Extra Thin Royal Oak 15202 from them, the quality can also meet your expectation.

Audemars Piguet 15202 Wrist Shot
Audemars Piguet 15202 Replica Watch

JH Factory Replica Audemars Piguet Royal Oak Chronograph 26331 with Asia 7750 [email protected]

Replica Audemars Piguet Royal Oak Chronograph

We have already known that JH factory has another name that is OM and they have started to make Audemars Piguet replica watches since 2019. In the past, JH only made some Audemars Piguet Royal Oak classic models like 15400, but now they have extended their business to Royal Oak Chronograph filed. Today, I will give a short review on the following replica Audemars Piguet Royal Oak Chrono watch, which is made of stainless steel and features a black dial.

JH Replica Audemars Piguet Royal Oak Chronograph
Replica Audemars Piguet 26331
Replica Audemars Piguet Royal Oak Chrono Black Dial

In my previous posts, I said that the best Audemars Piguet replica watches are made by J12 factory, whether the basic Royal Oak 15400, or Royal Oak Tourbillon, or Royal Oak Offshore, the best replicas belong to J12, we have to admit this, however, these replicas from J12 also have very expensive prices, even the basic Royal Oak is sold at more than $460 usd. So, those Audemars Piguet replica watches from JH factory give us a very affordable option.

Audemars Piguet Royal Oak Chronograph Stainless Steel Case
Audemars Piguet Royal Oak Chrono Buttons

The watch has a stainless steel case and bracelet, it is sold made. The brushed case finish is highly contrasting with the octagonal bezel that is polished. There are chronograph buttons on the right case, you can operate them like you did on a genuine Royal Oak Chronograph watch, when you push the button at 2 o’clock down, the central big second hand will start to work, however, this replica watch does not have a full chronograph function, I mean the 30-minute chronograph counter and 12-hour chronograph counter at 3 and 9 o’clock with no function. The only working subdial is the small seconds positioned at 6 o’clock. I do not know why JH factory did not give it a full chronograph function, actually they can achieve the function easily.

Royal Oak Engravings on Case Back
Audemars Piguet Royal Oak Chronograph Stainless Steel Bracelet
Audemars Piguet Royal Oak Chronograph Stainless Steel Clasp

Besides the big fault chronograph display, the dial of the replica is made very accurate. Especially the date window, it is very close to genuine and not like most other Audemars Piguet replica watches, it is not recessed at all. By the way, like Audemars Piguet replica watches from J12 factory, this AP replica watch from JH factory also has correct and strong green lume color.

Audemars Piguet Royal Oak Chronograph on Wrist

Overall, if you want to buy one replica Audemars Piguet watch with high grade case finish and perfect clasp engravings, please go with J12 products, if you do not have enough budget and want an affordable replica AP, please order from JH(OM) factory.

Audemars Piguet Royal Oak Chronograph Stainless Steel Collection:

Audemars Piguet Royal Oak Chronograph White Dial
Audemars Piguet Royal Oak Chronograph White Subdials
Audemars Piguet Royal Oak Chronograph Blue Dial
Audemars Piguet Royal Oak Chronograph Grey Subdials

Audemars Piguet Royal Oak Chronograph Rose Gold Collection:

Audemars Piguet Royal Oak Chronograph Rose Gold Black Dial
Audemars Piguet Royal Oak Chronograph Rose Gold Blue Dial
Audemars Piguet Royal Oak Chronograph Rose Gold White Dial
Audemars Piguet Royal Oak Chronograph Rose Gold

Replica Audemars Piguet Royal Oak Tourbillon Extra-Thin Skeleton Watch Review

Replica Audemars Piguet Royal Oak Tourbillon Extra Thin

Every man wants to own one mechanical watch, once they have it, then a higher goal will appear, maybe for a chronograph watch or other complications. After the born of mechanical watch, tourbillon is always the focused object among our watch fans, each brand has their own iconic tourbillon watch model. Now, tourbillon even becomes the pursuit of many watch buyers for the highest quality mechanical watch.

Replica Audemars Piguet Tourbillon Skeleton
Audemars Piguet Skeleton Tourbillon Replica
Audemars Piguet Skeleton Dial

In replica watches market, the most popular tourbillon watches come from Audemars Piguet and Richard Mille, the two sports brands, while the tourbillon watches made by them are highly welcomed in replica watch field. I introduced one Royal Oak Tourbillon watch from R8 factory before, and this post received a lot attention, many buyers asked me its price. Today, I will introduce another Audemars Piguet Royal Oak tourbillon replica watch, compared with previous ones, this watch is completely an art work.

Audemars Piguet Royal Oak Tourbillon Steel Case
Audemars Piguet Royal Oak Tourbillon Crown

First, this replica Audemars Piguet is not coming from J12 watch factory, do not trust some websites saying that this tourbillon watch is made by J12. Although it is a tourbillon, the watch still has a extra thin case, which is measured to be only in 12mm, very close to the case thickness of genuine watch.

The dial is completely skeletonized, except the most outer inner bezel that marks hour markers and minute scales, the other part of the dial is skeleton, you can see supports, the working tourbillon device and other machine parts. In the past, I did not like complication watch with such a skeleton dial, but nowadays, I think this exactly reflects the advanced watch-making technology of the factory.

Audemars Piguet Royal Oak Tourbillon Crystal Back

It is a real tourbillon watch, the factory installs a manual winding flying tourbillon movement in this watch, you just need to wind the watch one time each day, about 20-30 rotations. Actually I think in all mechanical watches, the tourbillon watch has the fewest chance to have technical issues, the tourbillon watch can also work very accurate, that’s why a lot of men want to own one tourbillon watch.

Audemars Piguet Royal Oak Solid Steel Bracelet
Audemars Piguet Royal Oak Clasp

Due to the high complicated skeleton dial and tourbillon movement, the replica watch is sold at a very expensive price. Let us expect that J12 will make this tourbillon watch in future. Most of people who really want to get one tourbillon watch do not want to pay a bit more money.

Audemars Piguet Royal Oak Tourbillon on Wrist

V9 Factory Replica Audemars Piguet Millenary 15350 with Clone 4101 Movement

Millenary is a dark horse among all Audemars Piguet models, it is not that popular Audemars Piguet famous Royal Oak and Royal Oak Offshore, I almost forgot that Audemars Piguet has ever had this series, and I do not know what kind of person is willing to buy such a watch – Millenary. What purpose Audemars Piguet makes this watch for? Does anyone know?

V9 is a new factory in replica watch field, at the beginning, it makes some Submariner models, now I still do not know why they make this ugly watch, do you guys like this Millenary? Maybe none of men want to buy an Audemars Piguet Millenary watch. However, this oval-shaped watch is a great timepiece for women.

Oval-shaped watch is very rare, I only see it in Millenary collection of Audemars Piguet. The uniqueness of this watch not only lies in its case design, which is oval-shaped, but also the dial, one half is displaying machine part of movement, one half is displaying time. The dial is skeleton, on the left, you can see the golden balance bridge, on the right half, there are two small dials, the smaller one is displaying small seconds, while the bigger one shows hours and minutes. Two dials are MOP and the bigger one uses Rome markers.

From the crystal back, the auto rotor is also placed on one side, it is in golden tone and has beautiful decoration. The Geneve Stripes on the base plate are also clear. To make such an oval-shaped case that looks as accurate as genuine, V9 factory has made a great effort.

The replica watch is sold more than $400 usd, first, it is a big expensive for me. If I were you, I will not buy it, or would rather paying a bit more to buy a replica Audemars Piguet RO Diver 15703 from J12 factory. What about your opinion on this Millenary watch?

Replica Audemars Piguet Millenary Watch
Replica Audemars Piguet Millenary Skeleton
V9 Replica Audemars Piguet Millenary
Replica Audemars Piguet 15350 Dial
Audemars Piguet Millenary Crown
Audemars Piguet Millenary Stainless Steel Case
AP Millenary Steel Case
AP Crown on Millenary
Audemars Piguet Golden Balance Bridge
Audemars Piguet Millenary MOP Dial
Audemars Piguet Millenary Small Seconds
MILLENARY Engraving on Case Back
Golden AP Auto Rotor
Golden AUDEMARS PIGUET Engravings
Audemars Piguet Millenary Black Leather Strap
Audemars Piguet Millenary Deployant Clasp
Audemars Piguet Millenary Stainless Steel Buckle
deandecruz24@gmail.com

J12 Factory Replica Audemars Piguet Royal Oak Offshore 26405 Ceramic Watch with Super Clone 3126 Movement

Replica Audemars Piguet ROO 26405

Now, Audemars Piguet is my dream watch, I like its strong and robust appearance. Among all Swiss watch brands, Audemars Piguet should have one position among the best-selling sports watches, its famous Royal Oak should also be one of the most successful sports models in recent ten years. Under such strong outlook, its quality is also strong, Audemars Piguet Royal Oak is also the favorite of many sports stars, under the Royal Oak Offshore collection, there are many limited edition models which Audemars Piguet published for sports stars like LeBron James, Lionel Messi, Michael Schumacher, etc. Today, I want to show you a great replica watch of Audemars Piguet, the genuine watch was published in 2017, this replica is made by famous J12 factory, which makes the best replica Audemars Piguet in our market.

Replica Audemars Piguet ROO Black Ceramic
Replica Audemars Piguet 26405 Checkered Dial

It is a ceramic watch. I mean both case and bezel are made of black ceramic. So the whole watch is very heavy due to the solid ceramic material. 44mm ceramic case is measured to be 16mm in thickness, so I think this watch with such a large case is not suitable for every one, just like Panerai for Stallone, you must have a large wrist so that can control the watch. Look at the construction of the entire middle case, it is like a sandwiched structure. The polishing face on the edge of bezel is highly contrasting with the brushed case side. Like genuine watch, the case back is titanium made.

Audemars Piguet 26405 Ceramic Bezel
Audemars Piguet 26405 Crown
Audemars Piguet 26405 Ceramic Case

Black dial has the same size of checkers as genuine AP. The blue color usage on hour and minute chronograph hands as well as central seconds chronograph hand is eye-catching, it also highlights the whole black dial and makes the watch look less dull. Date window is set at 3 o’clock, the date font is just set in the right center of the window, and in correct font size. Because the small seconds subdial is set at 12 o’clock, so, not like before, the dial will not be a big fake spot, it becomes more and more accurate, some could even be interchanged with genuine watch.

Audemars Piguet 26405 Titanium Case Back

Installed with a super clone 3126 movement inside, the replica is closer to genuine watch even it has a see-through case back. Together with the 3120 movement in Royal Oak, both movements are super clones of J12, they costed J12 factory a lot of efforts and time to develop these two movements. Now, no other watch manufacturers are able to clone AP 3120 and 3126, they do not need to do, because they can not compete with J12.

AP Buckle

Because J12 factory’s absolute dominance in this replica Audemars Piguet watches, it is worth to spend more money with this factory to buy a good quality AP replica watch.

OM Factory Replica Audemars Piguet Royal Oak 15400 Rose Gold Watch with Black Leather Strap

Replica Audemars Piguet Royal Oak Classic

Royal Oak is the hottest model in our market, various factories have replicated many models of Royal Oak, especially 15400. Among so many manufacturers, J12 is the one that makes the best replica Audemars Piguet Royal Oak watches. I have introduced the replicas of Royal Oak 15400 here, one is made by OM factory and has a black dial, the other is made by J12 factory and has a blue dial. Both are in good quality. Compared the two 15400 replica watches from OM and J12, I still think that the one made by J12 has a better quality. But why do I still introduce the OM 15400 to you guys? Because it is much cheaper.

Replica Audemars Piguet Royal Oak Automatic
Replica Audemars Piguet 15400 Rose Gold
Replica Audemars Piguet 15400 Black Dial

This Roayl Oak 15400 replica is made of 316F stainless steel and has 18K rose gold plating on the case, which is measured to be 41mm in diameter and only 10.7mm thick. The latest V5 edition of 15400 from J12 factory is also 10.7mm in case thickness. The case is brushed, there are eight screws on the bezel in matt finish, classic octagonal bezel has smooth edge that is polished. Seeing the case from side, it is straightforward, only the lugs have somewhat mechanical curvature.

Replica Audemars Piguet 15400 Rose Gold Case
AP Crown on 15400

The dial is in black and has delicate checkers decoration. Hands and hour markers have rose gold edge, while their center is filled with white luminescence. Central second hand works smoothly crossing the round dial.

Audemars Piguet 15400 Crystal Back
Audemars Piguet Asia Clone 3120 Movement

Both 15400 from OM and J12 use Asia clone 3120 movement that is based on a genuine Japanese Miyota 9015. Actually the clone 3120 was firstly developed by J12 factory, so, maybe the clone 3120 installed in J12 15400 is more stable.

Audemars Piguet Rose Gold Clasp

Compared the two 15400 from OM and J12 factory, OM only has the price advantage, because it is tens of dollars cheaper than the one of J12. So I still suggest you buy the 15400 replica from J12, after all, the latest edtion of 15400 from J12 is V5 now, after so many improvements, the case finish and dial details have come to be perfect.

Audemars Piguet Black Leather Strap

Anyway, if you want to buy the 15400 from OM, the factory will also offer you one pair of free rubber strap.

R8 Factory Replica Audemars Piguet Royal Oak Flying Tourbillon Movement Full Black Watch

Replica Audemars Piguet Royal Oak Tourbillon

Royal Oak is one of the most popular sports watches in recent ten years, it is just like the Big Bang for Hublot, both are highly welcomed by people who love sports watches. In the past several years, Royal Oak has published a lot of classic models, 15400 is one of them, it is very hot and has also become the hot object of various factories to replicate. Besides the basic models, Royal Oak also has the watch with complicated functions such as tourbillon. I wrote an article about the replica Audemars Piguet Royal Oak Tourbillon watch made by R8 factory before, it is a great replica with high quality finish and real tourbillon movement, after several reponses from my clients, I decided to introduce another good quality tourbillon watch from this factory, different from the previous white stainless steel model, this Audemars Piguet Royal Oak Tourbillon has a full black appearance, which not only looks cool but also like a black knight.

R8F Replica Audemars Piguet Royal oak Black
Replica Audemars Piguet Royal Oak PVD Black
Audemars Piguet Royal Oak Black Dial

The watch has a full black outlook, actually it is made of 316F stainless steel and then being fully plated with black PVD. 41mm case is brushed, seeing the case from sides, we can see obvious edges and corners, which make the case full of mechanical beauty. Although the case of Royal Oak is not that large as Big Bang of Hublot, it looks much stronger. The bezel is brushed on the front, while the round edge is polished, you can find the hierarchical processing on the case from the sides. All screws on the bezel are white stainless steel.

Audemars Piguet Royal Oak Crown
Audemars Piguet Black PVD Case

The dial of the replica Audemars Piguet watch is very unique. It is not the common checkered dial on most Royal Oak models, the checkers on this Audemars Piguet Royal Oak Tourbillon watch have different sizes and they are radial. The most important part on the dial is the big window opened at 6 o’clock, it is the tourbillon device, the openning window is big. To guarantee a high stability, the tourbillon movement has several supports fixed on the dial. Both hour markers and hands have silver edge and are filled with white luminescence in the center.

Audemars Piguet Royal Oak Tourbillon Device

The movement inside is a genuine tourbillon, which is manual winding, you need to wind the watch every day, and better to wind it before going to bed every night to gain enough power, so that the watch could still work accurate till next morning. If you are not a crazy fan of Audemars Piguet tourbillon watch, plus its special black PVD coating on it, I do not recommend you buy this replica watch, because it has a very expensive price.

Audemars Piguet Royal Oak Flying Tourbillon Movement
Audemars Piguet Black PVD Bracelet
Audemars Piguet Black PVD Clasp

Noob 1:1 Best Replica Audemars Piguet Royal Oak Offshore Survivor with Asia Valjoux 7750 Movement Red Leather Strap

Replica Audemars Piguet Royal Oak Offshore Survivor

Royal Oak Offshore Survivor is the biggest Audemars Piguet watch I have ever seen. Its extremely large pusher protector is the biggest feature of Survivor. The watch looks cool and fantasy, the most striking chronograph pusher protector makes it to be the watch I want to wear even do not know whether I like it or not. Genuine Audemars Piguet Royal Oak Offshore Survivor is limited to 1,000 pieces, now it has already been sold out. If you still want to own one, the only way is to buy a replica. Today, I am going to introduce such a high quality Audemars Piguet Survivor replica watch, which is made by Noob factory. Please note, if you want the best quality replica of this Audemars Piguet watch, you must buy this one, the one made by Noob factory, because other factories like J12 did not make this watch. The only high end version is made by Noob.

Replica Audemars Piguet Survivor Limited Edition
Replica Audemars Piguet Survivor
Audemars Piguet Survivor Black Dial

Like genuine, the case is blackened titanium, Noob used black DLC coating on the titanium case. The case is up to 44mm in diameter, this even does not include the size of crown and chronograph pusher protectors. There are cutout holes on the left case surface, grooved bezel is made of black ceramic and fixed by Titanium screws. The entire case and bezel are fine brushed, on the right case side, crown and chronograph pushers all have special protectors.

Audemars Piguet Survivor Small Seconds Subdial
Audemars Piguet Survivor Hands
Audemars Piguet Survivor 12 Hour Chronograph Counter
Audemars Piguet Survivor 30 Minute Chronograph Counter

Black dial has a tachymeter scale like genuine. The segmented hands are the second striking visual feature of this Audemars Piguet Survivor watch. Small seconds subdial is positioned at 12 o’clock, the small seconds hand has a red end. 30-minute chronograph counter and 12-hour chronograph counter are positioned at 9 o’clock and 6 o’clock separately. To increase the entire readability of the dial, the hands and markers on two chronograph counters are in white, which is highly contrasting with the black background. Every black stick hour marker has one luminous dot, the central segmented hour and minute hands are also applied with luminous material.

Audemars Piguet Survivor Titanium Case
Audemars Piguet Survivor Crown Pusher Protectors

Noob used a black leather band on this replica watch, while they also offer one pair of black rubber straps for free. Besides, the watch will also come with Audemars Piguet sports wrist bands.

Audemars Piguet Survivor Crown Close-up
AP Crown on Survivor
Audemars Piguet Survivor Crown
Audemars Piguet Survivor Case Back
Audemars Piguet Survivor Case Back Close Up
Audemars Piguet Survivor Red Leather Strap
Audemars Piguet Survivor Noob

OM Factory Replica Audemars Piguet Royal Oak 15400 with Clone 3120 Movement Black Dial

OMF Replica Audemars Piguet Royal Oak

In recent years, maybe Royal Oak is the most popular sports watch. Due to its very unique shape, the watch could be easily recognized just at a glance. Royal Oak is the most famous series of Audemars Piguet, it has basic and complications such as chronograph, tourbillon and perpetual calendar. Among these models, the one we love most is Royal Oak 15400, which is also the model that has been mostly replicated in our market. I have introduced a replica of Royal Oak 15400 before, it is made by J12 factory, yes, I admit that their replica AP Royal Oak 15400 is the best version in the market, several weeks ago, J12 updated the 15400 to latest V5 edition. With the high popularity of Royal Oak 15400 in watch market, there are other factories that are replicating it except J12. Yes, OM is one of these factories, it also makes good quality 15400 replica like this one. And the price is much lower than J12 factory’s.

Replica Audemars Piguet Royal Oak 15400
Replica Audemars Piguet Royal Oak 15400 Stainless Steel
Audemars Piguet Royal Oak 15400 Black Dial

I have two purposes to introduce this 15400 to you. First, if you want a good quality Royal Oak 15400 replica at less than $400 usd, then buy it from OM factory. Second, compared the best version from J12 factory, OMF 15400 has a better bracelet quality, the end links on the bracelet are better.

Audemars Piguet Royal Oak Crown
Audemars Piguet RO Case

The stainless steel case is 41mm in diameter, it is brushed on front face, while on both sides, the case is polished. Bezel is fixed by screws at the eight corners of the octagon. The edge of the bezel is polished. Check crown on the right side, the “AP” engraving is sand finished. Case back is with a sapphire crystal porthole on the center, the back side of the four lugs is micro-sanded, which is contrasting with the brushed finish of the case back.

AP RO 15400 Crystal Back
AP RO 15400 Movement

The dial has four color options for you to choose, black, white, grey and blue. Most people choose black and blue. But the white and grey are also very classic. The checkered dial was the hard point to be cloned in the past, now after researching and upgradation of watch-making technology, the checkered dial on 15400 could be made 99% the same as genuine, whether the Royal Oak 15400 made by J12 or OMF, the checker dial will not become a fake spot.

AP RO Steel Bracelet
AP RO Clasp

The bracelet is absolutely a selling point, I have to admit J12 does better polishing on the bracelet of their 15400, but on this OMF version, the shape and length of bracelet are closer to genuine. Fitted with a deployant clasp that has correct engravings. At last, please read the specification.

AP RO 15400 Blue Dial

Movement: Asia Clone AP 3120, Based on Genuine Japanese Miyota 9015 Automatic.
Case: 41mm*10.7mm, 316F Stainless Steel
Bezel: 316F Stainless Steel
Crystal: Sapphire with AR Coating
Dial: Black, White, Grey and Blue Options, Checkered Dial with Lumed Hour Markers and Hands
Bracelet: Solid 316F Stainless Steel with Deployant Clasp
Water Resistant: 50m

AP RO 15400 Grey Dial
AP RO 15400 White Dial