MK Factory Ultimate V2 Edition Replica Omega Seamaster Diver 300m with Asia ETA 2824-2 Movement

MKF Replica Omega Seamaster Watch

This is the V2 edition MK factory has published several days ago. In recent two years, Omega has a greater affection for the seas than Panerai and Rolex, Omega has published a lot of good-looking diver’s watches in these two years, and these models are also highly welcomed in fake watch industry. The replica made by MK is also one of the best-selling replica Omega watches, its popularity is only next to classic Planet Ocean Liquidmetal. VS factory also makes this replica watch, but it is still not upgraded, so its quality can not be compared with this one.

Replica Omega Seamaster 300 Watch
Replica Omega Seamaster Diver 300m
Replica Omega Seamaster Black Dial

The case is made of 316L stainless steel, its diameter is up to 41mm, the case is brushed with polished lugs, bezel is uni-directional rotating, it has wave-shaped edge, there is a black ceramic insert on the bezel with white diving markers. The case back has a big seahorse emblem, which is an incon of Omega Seamaster watch. The He Valve button at 10 o’clock on the left case does not have function.

Omega Seamaster Crown
Omega Seamaster He Valve

The dial is black and I love its design. Compared with Rolex Submariner’s dial type, I love the one on this Omega Seamaster watch. On V2 edition, the biggest improvement lies in its lume on hour markers. MK factory made the silver edge of each hour marker narrow, and increased the amount of lume material on each marker, so that the visibility of hour markers and hands will become stronger in weak light conditions. Sword hour and minte hands are skeletonized on the center. Date aperture positioned at 3:00 has a white font in black background, it is obviously readable.

Omega Seamaster 300m Case Back

The bracelet is crafted from solid 316L stainless steel, we can send you one free black nylon band with the watch. By the way, the replica watch is equipped with an Asia ETA 2824-2 automatic movement, which is very reliable and stable. In the development of replica watch industry, Asia ETA 2824-2 plays an important role, almost the replicas of each brand watch have been equipped with this movement, its stability has also been improved to be so perfect that no failure rate.

Omega Seamaster Clasp

If you are looking for a diver’s watch from Rolex and Omega, this Seamaster Diver 300m can be your perfect choice.

Omega Seamaster 300m Replica Watch

VS Factory Replica Omega Planet Ocean Deep Black with Clone 8906 Movement

Replica Omega Planet Ocean Black

Since the release of Omega Spectre 007 by KW factory, there have been more than two years. Within the two years, KW, also named VS, did not publish any important models that could attract our attention. Once I saw this watch in the market today, I was deeply impressed by its cool black outlook. My watch supplier in the VS factory did not tell me about this watch, I asked why he did not tell me about it, so I can share it with you guys earlier. Fortunately I found it by myself today. I took these photos for you, is it the black so impressive? I am looking for such type of black diver’s watch for a long time. Now, it’s my honor to share the watch with you here. Actually, the replica watch not only has the black version, it also has red and blue editions. I will post the photos of the blue and red ones at last.

Replica Omega Planet Ocean Deep Black
VSF Replica Omega Deep Black
Replica Omega Black Ceramic Dial

Both case and bezel are made of high grade black ceramic material, which are brushed. The markers on the bezel not only have correct engraving depth, they also have the correct color, you can compare it with genuine, the sanblasted bezel markers are full of high quality texture. The dotted bezel pearl is on a sandblasted triangle mark, the bezel pearl will emit a green lume light in the dark. Case back uses Naiad Lock technology, I do not know if VS factory has used this lock technology on this replica, may be not, but the case back could be tightly locked to ensure a great depth of water resistance.

Omega Deep Black Crown
Replica Omega Deep Black Ceramic Case

Dial is upgraded, not the common DLC plated metal, but is real black ceramic. The matte finish of the dial is like that VS factory has done on its bezel. Silver hour markers and hands are all filled with Swiss grade lume material. There are two different lume color on the dial, blue on hour hand and hour markers, green on minute hand. There are one extra hand with an orange triangle tip on the center, it is the 24-hour GMT hand of the replica watch. This GMT hand works the same as genuine. Under such a full black appearance, the replica watch still has a good readability because of its lumed dial and orange color usage on the dial.

Omega Deep Black Crystal Back
Omega Clone 8906

Look through the crystal case back, there are rosy red engravings “CO-AXIAL 8906” on the auto rotor, which has unique decoration that looks the same as genuine Omega 8906 movement. The clone movement is not based on any type of Asia automatic movement, it was independently developed by VS factory. Every component, including the jewels, is imported from the abroad, even the balance wheel is blackened, so even you wear this replica in an Omega boutique, the sales person check it through the crystal back, they are not able to tell it from a genuine.

Omega Deep Black Rubber Strap
Omega Logo on Buckle
Omega Deep Black Blue Watch
Omega Deep Black Red Watch

VS Factory V3 Edition Replica Panerai PAM 505 Radiomir Black Seal Ceramic Watch with Super Clone P.9000

Replica Panerai Radiomir Black Seal

Most popular Panerai watches are the ones with Luminor case. Radiomir is not that popular as Luminor Panerai. However, in the development of Panerai, Radiomir even played a more important role. It is the prototype of modern Luminor Panerai, if you want to find some trace related to Panerai’s richest history as a military watch for the Italy Navy, then you should buy a Panerai Radiomir watch. Today, the replica Panerai watch I am going to review is made by VS factory, which has been specilized in manufacturing good quality PAMs for years. This black Radiomir Black Seal ceramic watch has a reference number PAM 505. It is the latest V3 edition that was published by VSF in the end of 2018.

Replica Panerai PAM 505
VSF Replica Panerai PAM 505
PAM 505 Black Dial

Genuine watch uses a composite material, which is not only ceramic. However, this replica PAM 505 uses an entire piece of ceramic in case construction. The sandblasted finish on the cushion-shaped case feels high quality texture. Onion-shaped crown is so big, you will feel very comfortable when rotating it to adjust hands or date. The crown features a classic OP Logo on the front. Wire lugs are one classic feature of Radiomir, they are removable.

PAM 505 Crown
PAM 505 Ceramic Case

Black dial is sandwiched, the upper plate has skeleton hour markers in stick shape, except Arabic numbers at 6, 9 and 12 o’clock. the sand finish of the black dial is the same as ceramic case. Small seconds hand on the subdial at 9 o’clock runs smoothly, it is applied with Swiss luminous material like central two hands. The printings on the dial have been improved on this V3 edition, I am not afraid you compare the dial with genuine watch, because there are really no flaws you can find.

PAM 505 ASSO Band

The movement is super clone P.9000, which is an in-house caliber by VSF. This movement has been improved by VSF for many times since its first release several years ago, now I do not know whether the factory will still update it or not, but it really has been very perfect. Super Clone P.9000 has many advantages, you could not even tell it from a genuine Cal.P.9000, besides, its inaccuracy is controled within eight seconds.

PAM 505 Crystal Back

I do not like the brown ASSO band on this PAM 505. I think one pair of black leather straps will be more suitable. However, with such a retro style Pre-V buckle, the distressed ASSO band is a perfection for this watch. Without crown bridge, the PAM 505 still has a large size, its diameter is up to 45mm, exactly meets our favor for big-size watches.

PAM 505 Wrist Shot

ZF Factory Replica IWC Pilot Top Gun IW389001 Real Ceramic Watch with Black Nylon Strap

ZF Replica IWC Pilot Top Gun

ZF factory has published a lot of new IWC replica watches in recent days, including the Pilot Chrono, Portuguese Annual Calendar, etc. There are a lot of pilot’s watches made by different brands, but my most favorite one is made by IWC, especially the Top Gun model, it is even the love of many military watch fans. Here I want to introduce the latest replica IWC Top Gun watch from ZF factory, its reference number is IW389001. The watch is made of real ceramic material and is fitted with a nylon band, the watch is in entire black color, which looks very cool.

Replica IWC IW389001

The ceramic case is measured to be 44mm in diameter and 17mm thick. The ceramic case is brushed, the matt finish of the case feels very well. The case is completely made according to genuine watch, not only the same in material, but also has a 1:1 construction. The natural streamlined case design looks graceful, crown and chronograph buttons are also in brushed, which is corresponding to the case finish. Case back uses solid stainless steel and has correct engravings, especially the “TOP GUN” engravings on the center, are delicately crafted.

Replica IWC Top Gun Ceramic

Black dial is covered by sapphire crystal that features AR Coating. All hour markers on the black dial are in white color. Big Arabic numerals with wide bar-shaped markers, they offer the wearer a good readability together. A eye-catching small second hand in red color is on the subdial at 6 o’clock. At 12 o’clock, there are dual subdials for 12-hour and 60-minute chronograph display. Two small hands on that dual subdial work the same way as genuine.

Replica IWC Top Gun Black Dial

The replica watch is equipped with an Asia Valjoux 7750 movement, it is a watch with real chronograph function. The mechanism is based on a chronograph movement of famous Shanghai Watch Factory in China. To reduce the chance of being repaired, I recommend you do not use the chronograph function too often.

IW389001 Crown Buttons and Chronograph Pushers
IW389001 Ceramic Case

At last, it is about the band, which is made of nylon on the outside and genuine leather on the side that touches your skin. The outside black nylon material keeps its cool appearance, while the leather on the back side guarantees a good wearing comfort. Nowadays, a lot of Swiss watches adopt this design in their band.

IW389001 Case Back

Today, a lot of brand replica watches are made by formal big factories, and the replica IWC from ZF factory will not disappoint you.

IWC Top Gun Nylon Strap
IWC Top Gun Clasp

Replica Jaeger LeCoultre Navy Seals Master Compressor Diving Watch with Articulated Rubber Strap

Replica Jaeger LeCoultre Navy Seals Master Compressor

Diver’s watch has been more and more popular in recent years. Rolex Submariner, Omega Planet Ocean, Cartier Calibre Diver and Audemars Piguet RO Diver, these watches often become the first choice of many people when they firstly picking up their watches. These diver’s watches also have a lot of replicas in our market. Several big factiries such as Noob, J12 and BP are making these replicas. However, the diver’s watches mentioned above are popular, but have you forgotten another one from a famous Swiss brand Jaeger LeCoultre? Yes, it is the Navy Seals Master Compressor Diving watch. Compared with other diver’s watches, Jaeger LeCoultre Navy Seals Master Compressor features a black articulated rubber band, which makes the watch look very unique. This watch also comes with a leather band, but I think articulate rubber strap looks more classic. There are a lot of people asking me about the replica of this watch, but in the past, the replica Jaeger LeCoultre Navy Seals Master Compressor has been out of stock for a long time, now a factory re-made this several weeks ago, so if you are interested in getting one, please contact me via email immediately.

Replica Jaeger LeCoultre Master Compressor
Replica Jaeger LeCoultre Navy Seals
Replica Jaeger LeCoultre Black Dial

The case is measured to be 42mm in diameter, it is made of 316L stainless steel and brushed, the big crown on the right side of the case is locked tightly. Black ceramic bezel is also brushed, with a lumed triangle mark at 12 o’clock. This triangle marker on the bezel will emit a green light in the dark. On the solid case back, there are unique engravings of U.S. NAVY SEALS. The whole case thickness is 13mm, not too thick for a diving watch.

Jaeger LeCoultre Navy Seals Case Back

The dial is black with white markers and hands, the classic match of black and white makes the dial highly readability. The dial is very simple, except necessary elements for reading time and date, there are no extra decoration on the dial. There are big Arabic numerals at 6, 9 and 12 o’clock. Trapezoidal hour markers have black edge and are filled with white luminous material, they will emit a blue lume light in the dark, which is corresponding to the green lumed bezel marker.

The most unique place of the replica Jaeger LeCoultre lies in its black articulated rubber band, which is anti-dust and has a better wearing comfort than the rubber band used on those Hublot or Cartier Diver watches. This type of rubber band is thick and wide, it could fit your wrist perfectly, the clasp is double deployant style and features diver’s extensions.

JL Clasp

Inside the case, there is an Asia ETA 2824 movement, the factory offered a genuine ETA movement option for this replica watch before, but they do not offer this option now because the replica with a genuine ETA movement is too much expensive and exceed the budget of most people. However, an Asia clone ETA has already been very reliable and accurate. Here come more details of the replica at last.

Movement: Asia Clone ETA 2824 Automatic
Case: 42mm*13mm, 316L Stainless Steel
Bezel: Dark Grey Ceramic
Crystal: Sapphire with Swiss Standard Colorless AR Coating
Dial: Lumed Hour Markers and Hands
Bracelet: Black Articulated Rubber Strap with Deployant Clasp
Water Resistant: 50m

Jaeger LeCoultre Diving Watch Wrist Shot

J12 Factory 1:1 Ultimate Replica Audemars Piguet Royal Oak Diver 15707 Ceramic Watch with Clone 3120

Replica Audemars Piguet Royal Oak Diver 15707

Nowadays in watch industry, Audemars Piguet has beaten many Swiss watch brands such as Breitling, Bell Ross and Tag Heuer, it has become a flagship brand among all Swiss sports watches. The big case and octagonal bezel are two big features of Audemars Piguet, you can notice this big watch at a glance. Royal Oak is the most popular sports series of Audemars Piguet, it is also very famous among all sports watches. The Royal Oak Diver is very new to us, it was just a new series published by Audemars Piguet several years ago. Now Royal Oak Diver has a lot of popular models such as 15703, 15710 and 15707. These models are also hot targets in replica watch industry, they have been replicated by a lot of factories, among them, I think J12 makes the best replica Audemars Piguet Diver watches. First, the case finish which J12 factory does in all Audemars Piguet replica watches is the best, this has been proven by the professionals in watch forums. Seconds, J12 is the factory that firstly developed Asia 3120 movement and installed their Audemars Piguet, now this movement researched two years ago has been improved by J12 for several times, so, the accuracy and stability are much better now. Third, about Audemars Piguet Diver watches, especially 15703 and 15707, J12 factory has upgraded their details for more than three times, now, this final edition is an ultimate 1:1 replica, if you have read my previous post about the Diver 15703, you will know how good the JF Audemars RO Diver is.

Replica Audemars Piguet Royal Oak Diver Orange
JF Factory Replica Audemars Piguet Royal Oak Diver
Replica Audemars Piguet 15707 Black Checkered Dial

The 42mm case plus its octagonal bezel looks big, however, the case is not thick, it is only 12mm. The entire case and bezel are made of black ceramic, the brushing finish on the case is the same as that of genuine watch. There are eight stainless steel screws fixed on the bezel, look at care carefully, its edge is finely processed, which feels very smooth. The whole case is full of angularity and mechanical beauty, especially its case side. The crown has delicate “AP” engraving in sandblasted finish.

Audemars Piguet 15707 Crown
Replica Audemars Piguet Ceramic Case

Black checkered dial has every detail that is made very close to genuine dial. The black dial has a very good readability, not only because of the Swiss lume material applied on hour markers hands, but also the orange color on inner bezel rehaut and minute hand increases readability. The lume on the dial is very strong and long lasting. Central second hand is very unique, the orange lume dot and tip are very attractive.

Audemars Piguet 15707 Black Rubber

Crystal case back shows the movement clearly. Now this Super Clone 3120 is the third generation of 3120 from J12 factory. The decoration on the golden auto rotor is upgraded, the sculpture on the rotor is 1:1 cloned from genuine AP 3120. While on the movement plates, there are golden engravings, the jewels have a correct tone. The mechanism of this Super Clone 3120 is genuine Miyota 9015, so the stability of the movement could be guaranteed.

Replica Audemars Piguet 15707 Crystal Back

Now, the review is done, let’s check the full specification of the replica watch.

Movement: Super Clone 3120 Based on Japanese Miyota 9015 Automatic, Platinum Plated Movement Plates and Decorated Auto Rotor, Currently The Best Clone 3120
Case: 42mm*12mm, Black Ceramic
Bezel: Imported Balck Ceramic Material
Crystal: Sapphire with Colorless AR Coating
Dial: Black Checkered Dial with Super Green Lume on Markers and Hands
Bracelet: Black Rubber Strap with Tang Buckle
Water Resistant: 50m

Replica Audemars Piguet 15707 Clone 3120

VS Factory V2 Edition Replica Panerai PAM 508 Luminor Submersible with Black Ceramic Case P.9000 Movement

Replica Panerai Luminor Submersible PAM 508

Panerai published Luminor Submersible PAM 508 in 2013, the watch has a big case diameter of 47mm, matte black ceramic case and is equipped with Panerai in-house P.9000 movement. Its design inspiration comes from Panerai traditional design concept in history, each detail is a perfect fusion of history and watchmaking technology. The outlook of PAM 508 is in dark black, which is like the pitch-dark deep sea. The matte black appearance makes the watch have a mysterious and magnificent style. In replica watch market, we all know that VS factory makes the best Panerai replica watches, each model is classic and has a good reputation in the industry. VS factory pursues perfection in details, their independently developed P.3000 and P.9000 movements have become the most classic models in this industry.

Panerai PAM 508 Ceramica
VS Factory Replica Panerai PAM 508
PAM 508 Black Dial

The tough case and angular style make Panerai so unique in Swiss watch industry. The Panerai PAM 508 replica from VS factory inherited the iconic outlook features of Panerai. 47mm case, plus crown bridge, only one word can describe this watch, that is “big”. Like genuine, the replica uses black ceramic as case material, then it is matte finished. The bezel also adopts black ceramic like case, the uni-directional rotating bezel has a luminous pearl and diving markers. Panerai printed the case material name “Ceramica” on its dial. Previous PAM 508 and PAM 441 made in replica watch market did not use real ceramic material, they used stainles steel and then have DLC black coating on surface, now, with the rapid development of watch-making technology, ceramic is widely used by replica watches. Please check the crown bridge, its arc is done perfectly. The round edge of the bezel pearl is a bit higher than the luminescence filled inside, this could give a full protection for the luminous material.

PAM 508 Ceramica Case
PAM 508 Crown Lever
PAM 508 Bezel

Black dial has three-dimensional hour markers that are filled with Super-LumiNova, so are skeletonized hour and minute hands. Small seconds subdial is positioned at 9 o’clock, the small hand and bar-shaped markers on that subdial are also applied with Super-LumiNova, so in weak or dark light condition, you can still read the time from the dial clearly. Above the black dial, it is a very thick sapphire crystal, which has been coated with colorless AR Coating like genuine PAM 508. The length and width of hour and minute hands are also the same as genuine.

PAM 508 Hands
PAM 508 Ceramica Small Seconds Subdial
PANERAI CERAMICA Dial Printings

The P.9000 inside is the latest enhanced version from VS factory, they spent two years to research and improve previous clone P.9000 movement. Now, this new P.9000 looks completely the same as genuine P.9000 Caliber. The movement is independently developed by VS factory according to original P.9000, the balance wheel now is set in a right position, the one-piece movement design greatly improves its stability and accuracy, the service life is also extended. Daily error has been tested by professional machine, it is controled within 10 seconds.

PAM 508 Case Back
PAM 508 Case Back Engravings
PAM 508 Case Back OP Number
PAM 508 FIRENZE 1860

The black leather band is a fine match for this black ceramic watch. This pair of leather straps is made of genuine calf skin leather and has a distressed look. Whatever, the band has a suitable width to match the big case, it feels comfortable to wear.

PAM 508 Buckle
VS Factory PAM 508 Ceramica
PAM 508 Wrist Shot

VS Factory V3 Edition Replica Panerai PAM 389 Luminor Submersible Titanium Case with Super Clone P.9000 Movement

Replica Panerai Luminor Submersible PAM 389

PAM 389, a fusion watch that adopts titanium, ceramic and rubber materials, its movement is the famous Panerai P.9000 Caliber, the watch has a sapphire crystal and brushed titanium case. PAM 389 has antimagnetic inner case to ensure the watch can work accurately. In the movie The Expendables 3, Sylvester Stallone and his teammates were exactly wearing PAM 389, so this watch was sold very well at that time. 47mm big case was exactly built for those tough guy. The dial is very simple and clean, bar-shaped hour markers are superlumed, 9:00 small seconds subdial is classic, P.9000 movement can offer the watch 72-hour power reserve. About this popular Panerai watch, there have already been a replica made by VS factory before, today, the one I am going to give a review is the V3 edition of the replica Panerai PAM 389 by VS factory, whether in outlook or functions, this replica is now closer to genuine.

VS Factory Replica Panerai PAM 389
Replica Panerai Luminor Submersible Amagnetic
Panerai PAM 389 Black Dial

The case of PAM 389 replica is made of solid Titanium, it is brushed, the Titanium case looks a bit darker than stainless steel. The bezel is uni-directional rotating, it uses a black ceramic insert, there are silver stud markers on the bezel, at 12 o’clock, there is a round pearl that is fully filled with luminescence. Case back is solid Titanium and has correct engravings that look so delicate. PAM 389 has a solid case back, I think this is also one reason why its replica is more popular than other Luminor Submersible replicas with see-through back.

Panerai PAM 389 Hands
Panerai Automatic Printings

On black dial, all three-dimensional hour markers are filled with genuine Super-LumiNova, hand are also applied with Super-LumiNova, together with bezel pearl, they will emit a strong green light in dark light condition. The grey dial printing “Amagnetic” under “LUMINOR SUBMERSIBLE” means genuine watch has an anti-magnetic performance. However, when you open the case back of this replica, you will find a piece of soft iron between the case back and movement, so I think this metal is placed here to prevent the movement from being affected by magnetic fields.

PAM 389 Crown Bridge
Replica Panerai PAM 389 Titanium Case

About the Super Clone P.9000 in this Panerai PAM 389 replica, it is the best P.9000 in the market developed by VS factory. With this movement, the hour hand now could be independently adjusted, you can turn it clockwise or anti-clockwise to adjust hours or date, the adjusting way is the same as genuine P.9000 Caliber. Besides, the balance wheel position is changed to be at 7 o’clock, other incorrect versions place the balance wheel at 10 or 6 o’clock. So, the appearance defect of clone P.9000 movement made before was completely solved. From production to assembly, each Super Clone P.9000 movement in VS factory will pass through a lot of tests, finally the daily inaccuracy is controled within 8 seconds.

PAM 389 Bezel
PAM 389 Crown Lever

Panerai has their own distinctive style, which has attracted a lot of watch fans, the PAM 389 I introduced today is even the first choice of many tough guys.

PAM 389 Case Back Engravings
PAM 389 DIVERS PROFESSIONAL
PAM 389 OP Logo
PAM 389 Pre-V Buckle
PAM 389 VS Factory
Replica Panerai PAM 389 on Wrist

EW Factory Replica Rolex GMT-Master II 126710 BLRO Black/Blue Ceramic Bezel with Jubilee Bracelet

Replica Rolex GMT-Master II 126710 BLRO

As a functional watch of Rolex, GMT-Master II plays an important role, among all series Rolex has published, GMT-Master is the most authentic model that featrues a GMT function. Not like Submariner, Rolex GMT-Master does not look that sporty, it is more suitable to wear as a dress watch, GMT-Master can perfectly fit your leisure suits or stripe shirts. Rolex has unveiled a lot of GMT-Master watches, some have become vintage models and are being pursued by lots of people, however, among all GMT-Master models, the most popular is the one with black/blue ceramic bezel, its reference number is 116710BLNR, I have already introduced the latest version of replica Rolex GMT-Master II 116710BLNR on this blog. Today, the GMT-Master II replica watch I am about to review also has a black/blue ceramic bezel, its reference is 126710 BLRO, the difference is 126710 BLRO has a jubilee bracelet. In January 2019, there are a lot of replica Rolex GMT-Master watches published in our market, from different factories, now this one is made by EW factory, it has a big price advantage, I mean the replica is sold at much cheaper than other models. To get an enhanced edition, I am still waiting the better version from Noob or GM factory.

EW Replica Rolex GMT-Master II
Replica Rolex GMT-Master II From EW Factory
Replica Rolex GMT-Master II Black Blue Ceramic Bezel

Its case is 40mm in diameter and measured to be 13mm thick. The case is made of solid 316L stainless steel, if you want a 904L stainless steel version, you must wait, because currently no factories make this 126710 BLRO GMT-Master with 904L stainless steel, maybe Noob or GM factory will have this edition several months later. Although the replica is made by a small factory, it has a good finish like other super replicas made by big factories. Do not doubt the case finish, now it is not a problem for all factories, they could use polishing and brushing on the case skillfully, crown is screwed down, the crown tube has a correct construction like genuine Rolex, so after lock the crown, you can also wear the replica watch under water.

Replica Rolex 126710 Crown
Replica Rolex 126710 Case

The bi-color bezel is bi-directional rotating, it uses black and blue ceramic insert, bezel markers have correct depth and are filled with platinum coating, when rotating the bezel, the feeling is like you are using the genuine bezel, the clicking sound is so great. On the bi-color bezel, the position on which the color changes is correct.

Replica Rolex 126710 Case Back

Black dial is covered by a sapphire crystal that is scratch-resistant and has AR Coating. In the crystal at 6 o’clock, there is a tiny laser crown logo, you need to observe carefully to find this feature that could only be found on genuine Rolex in the past. On the dial, there is a GMT hand with triangle tip and green stem, it is pointing to the 24-hour marker on the bezel. Dotted hour markers and hands are fully filled with Swiss Superlume material, the dial will have a strong and long-lasting blue light in the dark. About hand stack, it is bad, not the same as genuine, because the replica is not equipped with a super clone 3187 movement, it uses an Asia ETA 2836. Many clients have compared these two movements, although 3187 looks closer to original, they finally are willing to choose the Asia ETA 2836.

Replica Rolex 126710 Jubilee Bracelet

The Rolex GMT-Master II replica is fitted with a Jubilee bracelet, I do not like this style, I think the Oyster bracelet is more suitable for a GMT-Master model. Oyster bracelet has already made 116710BLNR a classic model.

Replica Rolex GMT 126710 Clasp
Replica Rolex GMT 126710 Clasp 1

126710 BLRO replica from EW factory can become your first choice if you are looking for an entry-level GMT-Master II replica watch. The most important thing is this replica is sold at a much cheaper price than those GMT-Master replica Rolex watches made by Noob. So, starting your replica watch journey with this GMT Rolex watch is a good idea.

Replica Rolex 126710 Wrist Shot

VS Factory Replica Omega Seamaster 300m Diver Watch with Blue Wave Dial Nylon Strap

Replica Omega Seamaster 300m Diver Blue

Omega Seamaster is one of the most popular modern diver’s watches, its popularity is second only to Submariner of Rolex, while Omega Seamaster is sold at a much lower price. The design of Omega Seamaster uses a lot of marine elements, such as the wavy bezel and blue color on bezel or band. Today, this Omega Seamaster 300m is actually a diver’s line Omega published in 2018 Basel, it has several models that differeniate each other by dial color and bracelet design. We did a Seamaster 300m Diver watch review before, it is a replica watch with black ceramic dial and bezel, now this replica Omega Seamaster Diver watch is made by the same factory, which is VS watch maker, it features a blue ceramic bezel and a wave dial that perfectly fit the ocean theme of Omega Seamaster watch wants to represent. The replica is the latest model in our market, it uses advanced watch-making technology and the movement is very stable.

Replica Omega Seamaster 300m Diver Co-Axial
Replica Omega Seamaster 300m Diver Watch
Replica Omega Seamaster 300m Blue Dial

The entire watch is in a very leisure style, this replica is not thick, only 13mm, so it could be easily worn under your shirt. Like most replica watches, the Omega Seamaster Diver blue replica is made of 316L stainless steel, the case is 42mm in diameter and brushed, polygonal bezel has wavy edge like the water wave in the ocean. The bezel frames a blue ceramic insert and has markers filled with platinum coating. The bezel pearl inside the big white triangle is filled with white luminescence, but not that full on the bezel pearl on Submariner. The He button at 10 o’clock does not have the real function. Look at the case back, there are black engravings of “DIVER 300M” that exactly saying the production line of the Omega watch. The nylon band is connected to the case through high quality stainless steel pins.

Replica Omega Seamaster Blue Crown
Replica Omega Seamaster He Valve Button

The dial is in blue, which exactly echoes with the blue ceramic bezel. The dial uses ceramic as base plate, and there are wave patterns, this is the biggest feature of this Omega Seamaster watch that distinguishes it from other Omega Seamaster Diver watches. This is the first time for Omega to use a wavy pattern design on the Seamaster dial. Sword-shaped hands have been skeletonized on the center, the central second hand has a red tip that matches the red stripes on nylon band. Big dot hour markers are fully filled with white luminous material to guarantee the lume light strong and long lasting, the blue dial has a high readability in any light condition.

Replica Omega Diver 300m Crystal Back
Replica Omega Diver 300m Clone 8800

The movement inside the case is a clone 8800, VS factory made this movement on basis of an Asia ETA 2836-2, to make it look closer to genuine Omega Cal. 8800, VS added plates on top and did some polishing and engravings on the auto rotor and plates. Although the whole movement is not independently developed by factory like Super Clone 8400, but it still has a super realiability.

Replica Omega Diver 300m with Nylon Strap
Replica Omega Diver 300m Blue Red Nylon

The nylon band has multi-color stripes, there are blue, grey and red color on that band. The factory also offers a stainless steel bracelet for this replica watch, certainly, you can buy the stainless steel model and I will send you one pair of nylon straps for free.

Movement: Asia Clone 8800 Automatic, Based on Asia ETA 2836-2, With Decorated Auto Rotor and Plates, Perfect Finish on Movement Plates with Correct Engravings
Case: 42mm*13mm, 316L Stainless Steel Made, Brushed Finish
Bezel: Blue Ceramic with Platinum Markers
Crystal: Sapphire with Swiss AR Coating
Dial: Blue Waved Dial with Dot Hour Markers, Superlumed Markers and Hands, Ceramic Dial Plate
Bracelet: Nylon Strap with Pin Buckle
Water Resistant: 50m

Replica Omega Diver Blue Wrist Shot